Abstract
Until the 1880s Britain was the world’s foremost producer of steel and a leading innovator, with developments such as Bessemer steelmaking to its credit (Dennis, 1967). But by 1890 Britain had been surpassed as a producer by the United States and by Germany, too, by 1900. Now Britain stands eighth in world steel output. In international trade Britain has performed badly compared to West Germany and Japan, a relative newcomer to world steel production. In 1965 Britain still had the fourth most favourable net balance among Western producers in direct steel trade; by 1974 she had become a net steel importer. The labour productivity of the British steel industry is now below that of all its major national European competitors, half that of the United States and almost a third that of Japan (American Iron and Steel Institute, 1975, table 4).
I owe an enormous debt to many British and German steelmakers and plantmakers for their time, advice and hospitality between 1976 and 1978. Although much of the material in the chapter was obtained from these interviews and visits, no unpublished items of information have been attributed, in order to protect confidentiality of sources. Any merit this paper might have is attributable to their help and to the comments of Mike Brown, Ian Christmas and Bernard Keeling. Christine Fielding and Bob Ward provided research assistance. But I alone must take the blame for errors, omissions and misinterpretations which remain.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
(i) Books and Articles
J. A. Allen, Studies in Innovation in the Steel and Chemical Industries (Manchester: Manchester University Press, 1967).
American Iron and Steel Institute, Steel Industry Economics and Federal Income Tax Policy (Washington, D.C.: AISI, June 1975).
D. Ault, ‘The Determinants of World Steel Exports: an Empirical Study’, Review of Economics and Statistics, 54 (Feb. 1972) 1, 38–46.
J. Aylen, ‘The British Steel Corporation and Technical Change’, appendix 23 of Select Committee on Nationalised Industries, vol. 3 (1978).
Battelle-Institut, ‘Scale Advantages of Equipment in the Iron and Steel Industry’ Bilaga 6 of Handelsstålsutredningen (1977).
British Iron and Steel Federation, The Steel Industry, Stage I Report of the Development Coordinating Committee (Benson Report) (London: BISF, 1966).
D. L. Burn, Economic History of Steelmaking 1870–1939 (Cambridge: Cambridge University Press, 1940).
D. L. Burn, The Steel Industry 1939–59 (Cambridge: Cambridge University Press, 1961).
B. Carlsson, Scale and Performance of Blast Furnaces in Five Countries — a Study of Best Practice Technology (paper presented at the Second Conference on Economics of Industrial Structure, Nijenrode, Netherlands: Apr. 1–3, 1975) mimeo.
A. Cockerill with A. Silberston, The Steel Industry (Cambridge: Cambridge University Press, 1974).
CONCAST Documentation Center, World Survey of Continuous Casting Machines for Steel (Situation 1.1.1977) (Zurich: Concast AG, March 1977).
R. Cordero and R. Serjeantson, Iron and Steel Works of the World (Worcester Park, Surrey: Metal Bulletin Books, 6th edn., 1974).
Council on Wage and Price Stability, Report to the President on Prices and Costs in the United States Steel Industry (Washington D.C.: US Government Printing Office, Oct. 1977).
W. H. Dennis, Foundations of Iron and Steel Metallurgy (Amsterdam: Elsevier, 1967).
E. Earnshaw, ‘Notes on the Layout of Wide Hot Strip Mills’, Steel Times (Apr. 1978) 303–16.
C. Erickson, British Industrialists: Steel and Hosiery 1850–1950 (Cambridge: Cambridge University Press, 1959).
T. Ess, The Hot Strip Mill Generation II (Pittsburgh: American Association of Iron and Steel Engineers, 1970).
Federal Trade Commission, Staff Report on the United States Steel Industry and its International Rivals: Trends and Factors Determining International Competitiveness (Washington, D.C.: US Government Printing Office, Nov. 1977).
E. Friedl and C. Schmidt, ‘Dimensioning of LD converters’, in Iron and Steel Institute (1972) 78–94.
Hand elsstälsutredningen, Handelsstälsindustrin inför 1980 — (Nabseth Report) 2 vols (Stockholm: Statens Offentliga utredningar, 1977).
G. Heynert and E. Legille, ‘Bell-less Top for High Top Pressure Furnaces’, in Iron and Steel Institute (1973) 109–30.
D. Houghton, ‘Planning for a Stainless Future’, British Steel (Winter/Spring 1975) 8–15.
International Iron and Steel Institute, Projection’85: World Steel Demand (Brussels: IISI, 1972).
International Iron and Steel Institute, Steel Intensity and GNP Structure (Brussels: IISI, 1974a).
International Iron and Steel Institute, Financing Steel Investment in Certain Major Steel Producing Countries 1961–1971 (Brussels: IISI, 1974b).
Iron and Steel Institute, Operation of Large BOF’s (London: ISI, 1972)
Iron and Steel Institute, Developments in Ironmaking Practice (London: ISI, 1973), special report.
J. C. C. Leach, ‘Secondary Refining for Electric Steelmaking’, Ironmaking and Steelmaking, 4 (1977) 2, 58–65.
A. H. Leckie and A. J. Morris, ‘Effect of Plant and Works Scale on Costs in the Iron and Steel Industry’, Journal of the Iron and Steel Institute, 206 (May 1968) 442–52.
A. Lederer, ‘The Plate Mill of Today’, Iron and Steel Engineer, 50 (Jan. 1973) 1, 41–52.
A. Lederer, ‘Zum Entwicklungsstand von Warmbreitbandstrassen’, Bänder Bleche Rohre, 6 (1975) available in revised form as State of Development of Wide Hot Strip Mills (Düsseldorf: Sack, 1978).
F. Lenger, ‘Modern Blastfurnace Design in Germany’, in J. Szekely (ed.), Blast Furnace Technology (New York: Marcel Dekker, 1972).
P. Maxwell, Learning and Technical Change in the Steelplant of Acindar SA in Rosario, Argentina (Buenos Aires: United Nations Commission for Latin America, Monografia de Trabajo, 4, 1976).
D. N. McCloskey, ‘Productivity Change in British Pig Iron, 1870–1939’ Quarterly Journal of Economics, 82 (1968) pp. 281–96.
J. R. Meyer and G. Herregat, ‘The Basic Oxygen Steel Process’ (1974), in L. Nabseth and G. F. Ray (1974) 146–199.
L. Nabseth and G. F. Ray (eds), The Diffusion of New Industrial Processes (Cambridge: Cambridge University Press, 1974).
National Economic Development Office, A Study of UK Nationalised Industries (London: NEDO, 1976).
Office of Technology Assessment and Forecast, US Patent Activity in Thirty Nine Standard Industrial Classification Categories information supplied to the Science Policy Research Unit by OTAF, US Department of Commerce (Washington: 1977).
Organisation for Economic Cooperation and Development, International Statistical Year 1973, Survey of the Resources Devoted to R-D by OECD Member Countries, Vol. 1, Business Enterprise Sector (Paris: OECD Directorate for Science Technology and Industry, 1977).
R. Pitler, World Technological Developments and their Adoption by the Steel Industry in the United States (paper presented at annual meeting of American Iron and Steel Institute, 1977) mimeo.
W. Schenk, ‘Continuous Casting of Steel’, in L. Nabseth and G. F. Ray (1974) 232–50.
Select Committee on Nationalised Industries, First Report from the Select Committee, Session 1972–3, British Steel Corporation (London: HMSO, 1973).
Select Committee on Nationalised Industries, First Report from the Select Committee on Nationalised Industries, Session 1977–8, British Steel Corporation, 3 vols (London: HMSO, 1978).
Sir R. Shone, Price and Investment Relationships: a Study in Applied Economics (London: Elek, 1975).
J. K. Stone, L-D Process Newsletter No. 69 (Zurich: Brassert Oxygen Technik AG, June 1977).
Statistical Office of the European Communities, Quarterly Iron and Steel Statistical Bulletin (Brussels: Statistical Office, 4th quarter 1976).
P. Témin, ‘The Relative Decline of the British Steel Industry’ in H. Rosovsky (ed.) Industrialization in Two Systems (New York: Wiley, 1966).
G. Turner, ‘Do We Get the Right Chaps?’ Sunday Telegraph (8 May 1977) 6–7.
United Nations Economic Commission for Europe, Economic Aspects of Continuous Casting of Steel (New York: UN, 1968).
J. Vaizey, The History of British Steel (London: Weidenfeld & Nicolson, 1974).
(ii) Statistical Series
American Iron and Steel Institute, Annual Statistical Report (Washington, D.C.: AISI.)
British Steel Corporation, Iron and Steel Industry: Annual Statistics for the United Kingdom (Croydon: BSC.)
Chambre Syndicale de la Siderurgie Française, La Siderurgie Française en 19—: Rapport d’Activité (Paris: CSSF, annual).
Groupement des Hauts Fourneaux et Aciéries Belges, La Sidérurgie Belge en19— (Brussels: GHFAB, annual).
Herausgegeben von der Wirtschaftsvereinigung Eisen und Stahlindustrie Statistisches Jahrbuch 19— der Eisen und Stahlindustrie (Düsseldorf: Verlag Stahleisen, annual).
Inco Europe, World Stainless Steel Statistics 19— (Worcester Park, Surrey: Metal Bulletin Books, annual).
International Iron and Steel Institute, World Steel in Figures 19— (Brussels: IISI, annual).
Japanese Iron and Steel Federation, Book of Iron and Steel Monthly Statistics (Tokyo: JISF, monthly, in Japanese).
Organisation for Economic Cooperation and Development, The Iron and Steel Industry in 19— (Paris: OECD, annual).
Editor information
Editors and Affiliations
Copyright information
© 1980 Science Policy Research Unit
About this chapter
Cite this chapter
Aylen, J. (1980). Innovation in the British Steel Industry. In: Pavitt, K. (eds) Technical Innovation and British Economic Performance. Palgrave Macmillan, London. https://doi.org/10.1007/978-1-349-04561-7_12
Download citation
DOI: https://doi.org/10.1007/978-1-349-04561-7_12
Publisher Name: Palgrave Macmillan, London
Print ISBN: 978-1-349-04563-1
Online ISBN: 978-1-349-04561-7
eBook Packages: Palgrave Business & Management CollectionBusiness and Management (R0)