Abstract
The configuration of technical systems is one of the most successful application areas of knowledge-based systems. This article overviews and evaluates the developed representation technologies and problem-solving methods, successful application fields and software-tools for configuration of the last few years. Current research themes and perspectives for the application of knowledge-based systems are presented as an outlook for the future.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Baader, F., Sattler, U.: Description Logics with Symbolic Number Restrictions. In: Proc. 12tth European Conf. on Artificial Intelligence, Budapest, pp. 283–287 (1996)
Baader, F., Sattler, U.: Description Logics with Concrete Domains and Aggregation. In: Proc. 13th European Conf. on Artificial Intelligence, Brighton, UK, pp. 336–340 (1998)
Bäckström, C., Jonsson, P.: Planning with Abstraction Hierarchies can be Exponentially Less Efficient. In: Proc. 14th Int. Joint Conf. on Artificial Intelligence, Montréal, pp. 1599–1605 (1995)
Bartsch-Spörl, B.: Ansätze zur Behandlung von fallorientiertem Erfahrungswissen in Expertensystemen. In: KI 4/1987, pp. 32–36. Oldenbourg-Verlag, München (1987)
Böhm, A., Uellner, S.: Kundenspezifische Konfiguration von Telekommunikationssystemen. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) 10. Workshop Planen und Konfigurieren, pp. 149–159. infix Verlag (1996)
Brinkop, A., Laudwein, N., Maassen, R.: Routine Design for Mechanical Engineering. In: 6th Innovative Application of AI Conference (IAAI), Seattle, pp. 3–13 (1994)
Brown, D.C., Chandrasekaran, B.: Design Problem Solving. Pitman, Research Notes in AI (1989)
Buchheit, M., Klein, R., Nutt, W.: Configuration as Model Construction: The Constructive Problem Solving Approach. In: Gero, J., Sudweeks, F. (eds.) Artificial Intelligence in Design. Kluwer Academic Press, Dordrecht (1994)
Cunis, R., Günter, A., Strecker, H. (eds.): Das PLAKON Buch - Ein Expertensystemkern für Planungs- und Konfigurierungsaufgaben in technischen Domänen. Springer, Heidelberg (1991)
DeKleer, J.: An Assumption-Based TMS. Artificial Intelligence Journal 32, 231–272 (1986)
Dörner, H.: Konfigurieren in schwach strukturierten Domänen. In: [Günter 95b], pp. 33–38
Doyle, J.A.: A Truth Maintenance System. Artificial Intelligence Journal 12, 231–272 (1979)
Emde, W., et al.: Interactive Configuration in KIKon. In: Mertens, P., Voss, H. (eds.) Wissensbasierte Systeme 1997, pp. 79–92. infix Verlag (1997)
Faltings, B., Sun, K.: Computer-Aided Creative Mechanism Design. In: Proc. IJCAI 1993, pp. 1451–1457 (1993)
Fleichanderl, G., et al.: Configuring Large Systems using Generative Constraint Satisfaction. IEEE Intelligent Systems, 59–68 (July/August 1998)
Friedland, P.E.: Knowledge-Based Experiment Design in Molecular Genetics. Report STANCS-79-771, Stanford University (1979)
Früchtenicht, H.-W. (ed.): Technische Expertensysteme: Wissensrepräsentation und Schlußfolgerungsverfahren. Oldenbourg (1988)
Ginsberg, M.L.: Dynamic Backtracking. Journal of Artificial Intelligence Research 1, 25–46 (1993)
Güsgen, H.-W., Hertzberg, J.: A Perspective of Constraint-Based Reasoning. Springer, Heidelberg (1992)
Günter, A.: Flexible Kontrolle in Expertensystemen für Planungs- und Konfigurierungsaufgaben in technischen. Domänen Dissertation, Universität Hamburg (1991)
Günter, A.: Verfahren zur Auflösung von Konfigurationskonflikten in Expertensystemen. In: KI 1/1993, pp. 16–22 (1993a)
Günter, A.: Modelle beim Konfigurieren. In: Herzog, O., et al. (eds.) KI-1993, pp. 169–176. Springer, Heidelberg (1993b)
Günter, A.: KONWERK - ein modulares Konfigurierungswerkzeug. In: Maurer, F., Richter, M.M. (eds.) Expertensysteme 1995, Kaiserslautern, pp. 1–18. infix Verlag (1995a)
Günter, A. (ed.): Wissensbasiertes Konfigurieren – Ergebnisse aus dem Projekt PROKON. infix Verlag, St. Augustin (1995b)
Günter, A., Kühn, C.: Einsatz der Simulation zur Unterstützung der Konfigurierung von technischen Systemen. In: Mertens, P., Voss, H. (eds.) Expertensysteme 1997, pp. 93–106. infix Verlag (1997)
Günter, A., Kühn, C.: Erfahrungen beim Transfer von Konfigurierungsmethoden. In: Sauer, J., Stein, B. (eds.) 12. Workshop Planen und Konfigurieren, Paderborn, Bericht Universität-GH Paderborn, pp. 59–64 (1998)
Haag, A.: The ATMS* – An Assumption Based Problem Solving Architecture Utilizing Specialization Relations. Dissertation, Universität Kaiserslautern (1995)
Haag, A.: Sales Configuration in Business Processes. IEEE Intelligent Systems, 78–85 (July/August 1998)
Hein, M.: Effizientes Lösen von Konfigurierungsaufgaben. Dissertation, TU Berlin (1991)
Heinrich, M.: Ressourcenorientiertes Konfigurieren. Künstliche Intelligenz 7(1), 11–15 (1993)
Heinrich, M., Jüngst, E.-W.: Konfigurieren technischer Einrichtungen ausgehend von den Komponenten des technischen Prozesses: Prinzip und erste Erfahrungen. In: Puppe, F., Günter, A. (eds.) Expertensysteme 1993, pp. 98–111. Springer, Heidelberg (1993)
Hotz, L.: Überlegungen zur parallelen Verarbeitung in Konfigurierungssystemen. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) Beiträge zum 10. Workshop, Planen und Konfigurieren, Bonn, Infix, pp. 172–178 (1996)
Hua, K., Smith, I., Faltings, B.: Integrated Case-Based Building Design. In: Wess, S., Richter, M., Althoff, K.-D. (eds.) EWCBR 1993. LNCS, vol. 837, pp. 436–445. Springer, Heidelberg (1994)
Jüngst, W.E., Heinrich, M.: Using Resource Balacing to Configure Modular Systems. IEEE Intelligent Systems, 50–58 (July/August 1998)
Kühn, C.: Konfigurierung von Fahrstühlen mit VT/KONWERK. In: [Günter 95b], pp. 327–336 (1995b)
Kühn, C.: Konzeption und Implementation von Modulen zur Integration funktionaler Modelle und Simulationsunterstützung in ein Konfigurierungssystem. Diplomarbeit Fachbereich Informatik, Universität Hamburg (1997)
Linnemann, B.: Technologietransfer von KI-Methoden in Konfigurierungs-Expertensysteme. Diplomarbeit, Hamburg (1994)
Marcus, S., Stout, J., McDermott, J.: VT: An Expert Elevator Designer That Uses Knowledge-Based Backtracking. AI Magazine 88, 95–112 (1988)
McDermott, J.: R1: A Rule-Based Configurer of Computer Systems. Artificial Intelligence 19(1), 39–88 (1982)
McGuiness, D.L., Wright, J.R.: An Industrial-Strength Description Logic-Based Configurator Platform. IEEE Intelligent Systems, 69–77 (July/August 1998)
Navinchandra, D.: Exploration and Innovation in Design. Springer, Heidelberg (1991)
Neumann, B., Weiner, J.: Anlagenkonzept und Bilanzverarbeitung. In: 3. Workshop Planen und Konfigurieren, Berlin (1989) Arbeitspapiere GMD
Neumann, B.: KONWERK – Technologietransfer mit einem Werkzeug. In: [Günter 95b] (1995b)
Olivier, P., Nakata, K., Landon, M., McManus, A.: Analogical Representations for Mechanism Synthesis. In: Proc. 12th European Conf. on Artificial Intelligence, Budapest, pp. 506–510 (1996)
Paulokat, J., Weß, S.: Fallauswahl und fallbasierte Steuerung bei der nichtlinearen hierarchischen Planung. In: Beiträge zum 7. Workshop Planen und Konfigurieren, Hamburg, GMD-Arbeitspapier Nr. 723, pp. 109–120 (1993)
Paulokat, J. (ed.): (A)TMS in Expert Systems. SEKI-Report Universtät Kaiserslautern (1992)
Pfitzner, K.: Fallbasierte Konfigurierung technischer Systeme. Künstliche Intelligenz (1), 24–30 (1993)
Puppe, F.: Problemlösungsmethoden in Expertensystemen. Springer, Heidelberg (1990)
Richter, M.M., Bachmann, B., Bernardi, A.: ARC-TEC - ein Beitrag zur wissensbasierten Unterstützung der industriellen Praxis. Künstliche Intelligenz 8(2), 52–56 (1994)
Richter, M.M., Bernardi, A., Klauck, C., Legleitner, R.: Akquisition und Repräsentation von technischem Wissen für Planungsaufgaben im Bereich der Fertigungstechnik. Research Report, RR-91-23, DFKI (1991)
Richter, M.M.: Neue Aufgaben beim Planen und Konfigurieren. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) 10. Workshop Planen und Konfigurieren, pp. 3–15. infix Verlag (1996)
Schädler, K.: Ansätze zur Abhängigkeitsverwaltung in KONWERK. In: [Günter 95b], pp. 217–228 (1995b)
Schirp, W.: Einsatz expliziter Begründungen in einem Assistenzsystem für Konfigurierungsaufgaben. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) 10. Workshop Planen und Konfigurieren, pp. 75–86. infix Verlag (1996)
Schumann, O., Schumann, S.: Modellierung von Unschärfe in KONWERK. In: [Günter 95b], pp. 97–117 (1995b)
Stein, B.: Functional Models in Configuration Systems. Dissertation, GH-Universität Paderborn (1995)
Stein, B., Curatolo, D.: Model Formulation and Configuration of Technical Systems. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) 10. Workshop Planen und Konfigurieren, pp. 56–70. infix Verlag (1996)
Stumptner, M.: An overview of knowledge-based configuration. AI Com. 10(2), 111–126 (1997)
Tank, W.: Ein produktorientierter Technologietransfer für wissensbasiertes Konfigurieren. In: Sauer, J., Günter, A., Hertzberg, J. (eds.) 10. Workshop Planen und Konfigurieren, pp. 46–54. infix Verlag (1996)
Tong, C., Sriram, D. (eds.): Design Representation and Models of Routine Design. Academic Press, London (1992)
Ulrich, K.T., Seering, W.P.: Function Sharing in Mechanical Design. In: Tang, C., Sriram, D. (eds.) Artificial Intelligence in Engineering Design, vol. II, pp. 185–214. Academic Press, London (1992)
VDI Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. VDIHandbuch Konstruktion. Beuth Verlag, Berlin (1993)
Weß, S.: Fallbasiertes Schließen in Deutschland – Eine Übersicht. In: KI 4/1992, pp. 46–51. FBO-Verlag Baden-Baden (1992)
Wrigth, J.R., et al.: A Knowledge-based Configurator that Supports Sales, Engineering and Manufactiring at AT&T Network Systems. AI Magazine 14(3), 67–88 (1993)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1999 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Günter, A., Kühn, C. (1999). Knowledge-Based Configuration- Survey and Future Directions. In: Puppe, F. (eds) XPS-99: Knowledge-Based Systems. Survey and Future Directions. XPS 1999. Lecture Notes in Computer Science(), vol 1570. Springer, Berlin, Heidelberg. https://doi.org/10.1007/10703016_3
Download citation
DOI: https://doi.org/10.1007/10703016_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-65658-6
Online ISBN: 978-3-540-49149-1
eBook Packages: Springer Book Archive