Overview
- Describes the fabrication process of heat-resistant and plastic-formable silicon nitride
- Explains in detail the results of both the creep test and instant break test to provide a conceptual view of material design
- Sets forth a new fabrication method for Si3N4 nanoceramics that produces high plastic formability
- Includes supplementary material: sn.pub/extras
Part of the book series: NIMS Monographs (NIMSM)
Buy print copy
About this book
In this book, improvements in the heat resistance of silicon nitride (Si3N4) ceramics using grain boundary control and in plasticity at high temperatures using grain size control in order to reduce the cost of shaping Si3N4 are described.
The heat resistance of Si3N4 is improved by mixing a slight amount of sintering additive as an impurity into the original material powder. The author presents his findings on the high heat resistance of Si3N4.
The author also develops a new fabrication method for Si3N4 nano-ceramics that produces high plastic formability. The method developed offers two improved points in grinding and sintering processes. The author found that the plastic formability of Si3N4 nanoceramics is dependent on load stress; the results of his research are detailed in this book.
Similar content being viewed by others
Keywords
Table of contents (4 chapters)
Authors and Affiliations
About the authors
Chief Researcher, Sialon Group, Sialon Unit, Environment and Energy Materials Division, National Institute for Materials Science
Email: Nishimura@Toshiyukinims.go.jp
Phone: +81-29-860-4488
1-1 Namiki, Tsukuba, Ibaraki, 305-0044 JAPAN
Bibliographic Information
Book Title: Fabrication of Heat-Resistant and Plastic-Formable Silicon Nitride
Authors: Toshiyuki Nishimura, Xin Xu
Series Title: NIMS Monographs
DOI: https://doi.org/10.1007/978-4-431-55384-7
Publisher: Springer Tokyo
eBook Packages: Chemistry and Materials Science, Chemistry and Material Science (R0)
Copyright Information: National Institute for Materials Science, Japan. Published by Springer Japan 2015
Softcover ISBN: 978-4-431-55383-0Published: 03 August 2015
eBook ISBN: 978-4-431-55384-7Published: 23 July 2015
Series ISSN: 2197-8891
Series E-ISSN: 2197-9502
Edition Number: 1
Number of Pages: VIII, 46
Number of Illustrations: 31 b/w illustrations, 4 illustrations in colour
Topics: Ceramics, Glass, Composites, Natural Materials, Nanotechnology, Solid State Physics, Nanotechnology and Microengineering, Structural Materials