Abstract
The ultrasound treatment of curved contours and complex surfaces is considered. Appropriate design approaches are discussed. As examples, automated ultrasound treatment processes are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Prikhod’ko, V.M. and Fatyukhin, D.S., Ultrasonic technologies at the modern mechanical engineering, Naukoemkie Tekhnol. Mashinostr., 2016, no. 8 (62), pp. 37–42.
Prikhod’ko, V.M., Nigmetzyanov, R.I., and Fatyukhin, D.S., Use of ultrasonic technologies to ensure and improve the quality and competitiveness of machine engineering products, Naukoemkie Tekhnol. Mashinostr., 2015, no. 7 (49), pp. 39–44.
Prikhod’ko, V.M., Medelyaev, I.A., and Fatyukhin, D.S., Formirovanie ekspluotatsionnykh svoistv detalie mashin ul’trazvukovym metodom (Formation of Operational Properties of Machine Parts by Ultrasonic Methods), Moscow: Mosk. Avtom.-Dorozhn. Gos. Tekh. Univ., 2015.
Prikhod’ko, V.M., Nigmetzyanov, R.I., Fatyukhin, D.S., Innovative technologies of ultrasonic treatment, Naukoemkie Tekhnol. Mashinostr., 2014, no. 7 (37), pp. 15–20.
Kazantsev, V.F., Luzhnov, Yu.M., Nigmetzyanov, R.I., et al., Selection and optimization of ultrasonic surface deformation modes, Vestn. Mosk. Avtomob.-Dorozhn. Gos. Tekh. Univ., 2016, no. 4 (47), pp. 26–32.
Burenin, V.V., Sova, A.N., Kirillov, N.P., et al., New hydraulic filters, installations, and devices for wastewater treatment of thermal power plants, Prom. Energ, 2014, no. 7, pp. 54–60.
Burenin, V.V. and Sova, A.N., Protection of the environment from pollution by dust-gas emissions from thermal power plants, Prom. Energ, 2014, no. 10, pp. 45–51.
Prikhod’ko, V.M., Fatyukhin, D.S., and Yudakov, E.G., Automation of ultrasonic cleaning process, Vestn. Mosk. Avtomob.-Dorozhn. Gos. Tekh. Univ., 2013, no. 4, pp. 26–31.
Livanskii, A.N., Nigmetzyanov, R.I., Prikhod’ko, V.M., Sundakov, S.K., Fatyukhin, D.S., and Yudakov, E.G., RF Patent 165529, Byull. Izobret., 2016, no. 29.
Nigmetzyanov, R.I., Fatyukhin, D.S., and Yudakov, E.G., Automated coordinate ultrasonic treatment of machine parts, Avtom. Sovrem. Tekhnol., 2014, no. 7, pp. 3–6.
Fatyukhin, D.S., Automated control and monitoring of the ultrasonic cleaning process, Avtom. Sovrem. Tekhnol., 2012, no. 2, pp. 25–29.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.F. Kazantsev, S.Yu. Kuznetsov, S.K. Sundukov, D.S. Fatyukhin, L.N. Britvin, 2017, published in STIN, 2017, No. 7, pp. 6–9.
About this article
Cite this article
Kazantsev, V.F., Kuznetsov, S.Y., Sundukov, S.K. et al. Ultrasound Treatment of Curved Contours and Complex Surfaces. Russ. Engin. Res. 37, 1074–1076 (2017). https://doi.org/10.3103/S1068798X17120097
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X17120097