Abstract
Based on modal control methods, structural and parametric synthesis is carried out and an integrated assessment is given for quality factors for different types of astatic electromechanical systems that are constructed based on a combination of the harmonic disturbance internal model principle (selective invariance) with other principles of control theory (cascade control, subordinate control with series compensation, state control, polynomial output control, and separation of motion rates). Methods are proposed for comparison and structural optimization of systems synthesized by using a combination of the specified methods in accordance with a defined complex of main and additional quality criteria: optimization of the constant and harmonic components of load torque disturbances, the range of acceptable variations of the inertia moment of the mechanical part, the level of pulsations of output speed signals when noise is on its measuring channel, the maximum value of signals time delay in the power converter when the system is stable, and the total degree of regulator dynamic blocks. The results show how the selected quality factors that are the most important for a designer are emphasized when the designer applies a combination of different system generation principles, which makes it possible to reasonably choose the most effective structural solution.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Schoenfeld, R. and Habiger, E., Automatisierte Elektroantriebe, Berlin: Veb Verlag Technik, 1981.
Selezneva, V.V., Vibrodiagnostics according to processing results, in Nadezhnost’ i diagnostirovanie tekhnologicheskogo oborudovaniya: Sb. statei INMASh AN SSSR (Reliability and Diagnosing for Technological Equipment. Collection of Scientific Papers of INMASh USSR Academy of Sciences), Moscow: Nauka, 1987.
Gudvin, G.K., Grebe, S.F., and Sal’gado, M.E., Proektirovanie sistem upravleniya (Control Systems Design), Moscow: BINOM. Laboratoriya znanii, 2004.
Kopylova, L.G. and Tararykin, S.V., The way to compensate harmonic disturbances at the loading moment in the following-up electromechanical systems and the elements of controller’s structure optimization, Vestn. Ivaovsk. Gos. Energ. Univ., 2012, no. 6.
Kulebakin, V.S., On the main problems and methods for increasing systems automated control quality, in Tr. II Vses. soveshch. po teorii avtomaticheskogo regulirovaniya (Proc. 2nd All-Union Meeting on the Theory of Automated Control), Moscow: Nauka, 1965, vol. 2.
Gaiduk, A.R., Osnovy teorii sistem avtomaticheskogo upravleniya: Ucheb. posobie (Foundations of Automated Control Systems. Student’s Book), Moscow: Uchebnaya literatura, 2005.
Andrievskii, B.R. and Fradkov, A.L., Izbrannye glavy teorii avtomaticheskogo upravleniya s primerami na yazyke MATLAB (Selected Chapters of Automated Control Theory with Examples in MATLAB Environment), St. Petersburg: Nauka, 1999.
Zaitseva, M.V. and Parsheva, E.A., Robust control for linear object under disturbances and noises, Mekhatron., Avtomatiz., Upr., 2011, no. 3.
Tyutikov, V.V. and Tararykin, S.V., Robastnoe modal’noe upravlenie tekhnologicheskimi ob”ektami (Robust Modal Control for Technological Objects), Ivanovo, 2006.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Tararykin, L.G. Kopylova, I.A. Tikhomirova, 2015, published in Elektrotekhnika, 2015, No. 5, pp. 62–70.
About this article
Cite this article
Tararykin, S.V., Kopylova, L.G. & Tikhomirova, I.A. Structural and parametric synthesis and optimization of controllers of selective-invariant electromechanical systems with harmonic load torque. Russ. Electr. Engin. 86, 296–303 (2015). https://doi.org/10.3103/S1068371215050089
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371215050089