Abstract
Heterogeneous nanostructured foils produced by magnetron deposition or mechanical processing represent a new class of reactive materials. They are composed of layers or clusters of different phases (typically with a size of 10–100 nm) that can react with each other with strong heat release. The reaction, being initiated locally, spontaneously propagates across the entire foil in the form of high-temperature wave. Some examples of promising practical applications of these foils in advanced technologies, such as joining dissimilar materials, were presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Weihs, T.P., Self-propagating reactions in multilayer materials, in Handbook of Thin Films Process Technology, Glocker, D.A. and Shah, S.I., Eds., Bristol: Inst. Phys. Publ., 1998, Part F.
Rogachev, A.S., Exothermic reaction waves in multilayer nanofilms, Russ. Chem. Rev., 2008, vol. 77, no. 1, pp. 21–37. doi 10.1070/RC2008v077n01ABEH003748
Reiss, M.E., Esber, C.M., van Heerden, D., Gavens, A.J., Williams, M.E., and Weihs, T.P., Self-propagating formation reactions in Nb/Si multilayers, Mater. Sci. Eng. A, 1999, vol. 261, no. 2, pp. 217–222.
Reeves, R.V., Rodrigues, M.A., Jones, E.D., and Adams, D.P. Condensed-phase and oxidation reaction behavior of Ti/2B foils in various gaseous environments, J. Phys. Chem. C, 2012, vol. 116, no. 33, pp. 17904–17912. doi 10.1021/jp303785r
Stover, A.K., Walker, N.K., Knepper, R., Fritz, G.M., Hufnagel, T.C., and Weihs, T.P., Correlating mechanical properties to microstructure in rolled nickel aluminum reactive laminates, presented at JANAF Conference 2008, Boston.
Wei, C.T., Maddox, B.R., Stover, A.K., Weihs, T.P., Nesterenko, V.F., and Meyers, M.A., Reaction in Ni–Al laminates by laser-shock compression and spalling, Acta Mater., 2011, 59, no. 13, pp. 5276–5287. doi 10.1016/j.actamat.2011.05.004
Specht, P.E., Thadhani, N.N., and Weihs, T.P., Configuration effects on shock wave propagation in Ni–Al multilayer composites, J. Appl. Phys., 2012, vol. 111, no. 7, 073527. doi 10.1063/1.3702867
Srivastava, V.C., Singh, T., Ghosh Ghowdhury, and Jindal, V., Microstructural characteristics of accumulative roll-bonded Ni–Al-based metal–intermetallic laminate composite, J. Mater. Eng. Perform., 2012, vol. 21, no. 9, pp. 1912–1918. doi 10.1007/s11665-011-0114-y
Wei, C.T., Nesterenko, V.F., Weihs, T.P., Remington, B.A., Park, H.-S., and Meyers, M.A., Response of Ni/Al laminates to laser-driven compression, Acta Mater., 2012, vol. 60, no. 9, pp. 3929–3942. doi 10.1016/j.actamat. 2012.03.028
Mozaffari, A., Danesh Manesh, H., and Janghorban, K., Evaluation of mechanical properties and structure of multilayered Al/Ni composites produced by accumulative roll bonding (ARB) process, J. Alloys Comp., 2010, vol. 489, no. 1, pp. 103–109. doi 10.1016/j.jallcom.2009.09.022
Mozaffari, A., Hosseini, M., and Danesh Manesh, H., Al/Ni metal intermetallic composite produced by accumulative roll bonding and reaction annealing, J. Alloys Comp., 2011, vol. 509, no. 41, pp. 9938–9945. doi 10.1016/j.jallcom.2011.07.103
Rogachev, A.S., Moskovskikh, D.O., Nepapushev, A.A., Sviridova, T.A., Vadchenko, S.G., Rogachev, S.A., and Mukasyan, A.S., Experimental investigation of milling regimes in planetary ball mill and their influence on structure and reactivity of gasless powder exothermic mixtures, Powder Technol., 2015, vol. 274, pp. 44–52. doi 10.1016/j.powtec.2015.01.009.
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Rogachev, A.S., Vadchenko, S.G., Nepapushev, A.A. et al. Reactive nanofoils for joining refractory and dissimilar materials. Int. J Self-Propag. High-Temp. Synth. 25, 234–237 (2016). https://doi.org/10.3103/S1061386216040087
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1061386216040087