Abstract
Analysis of measures used to reduce energy expenditures shows that methods in which a single parameter is changed are ineffective. Coordinated adjustment of several parameters is required. Theoretical analysis reveals the combinations of parameters with the greatest effect. The influence of the granulometric composition of the sinter on the blast-furnace efficiency is considered in terms of the influence of the mean piece size on the reduction rate and the gas dynamics of the upper furnace region. When the reaction FeO + CO = Fe + CO2 reaches equilibrium, the heat consumption in smelting is reduced by increasing the smelting rate. Analysis of specific approaches to reducing the heat consumption in blast furnaces for the example of PAO Novolipetskii Metallurgicheskii Kombinat (NLMK) indicates the basic measures that decrease heat consumption: optimization of the iron ore by reducing the proportion of the >45 mm fraction; increase in output of the blast furnaces to 75–90 t/day (per m2 of hearth); operation with the highest permissible pressure (in terms of the charging-unit design); increase in hot strength of the coke to 60–62%; pulverized- coal injection at 140 kg/t of hot metal; and optimization of the ore distribution over the furnace radius. Between 2013 and 2016, those measures decreased coke consumption by more than 10 kg/t of hot metal. In addition, the total consumption of carbon fuel was reduced.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Rammer, B., Millner, R., and Boehm, C., Comparing the CO2 emission of different ironmaking rout, Proc. 7th European Coke and Ironmaking Congr.—ECIC, Linz, 2016, pp. 284–291.
Schmole, P., The blast furnace—fit for future, Proc. 7th European Coke and Ironmaking Congr.—ECIC, Linz, 2016, pp. 3–12.
Tovarovskii, I.G., Protsessy domennoi plavki. Tom 2. Problemy i perspektivy: monografiya (Blast Furnace Processes, Vol. 2: Problems and Perspectives. Monograph), Saarbrucken: LAP Lambert Acad. Publ., 2012.
Tovarovskii, I.G., Domennaya plavka: monografiya (Blast Furnace Smelting: Monograph), Dnepropetrovsk: Porogi, 2009.
Spirin, N.A., Lavrov, V.V., Rybolovlev, V.Yu., et al., Matematicheskoe modelirovanie metallurgicheskikh protsessov v ASU TP (Mathematical Modeling of Metallurgical Processes in Automated Process Control System), Spirin, N.A., Ed., Yekaterinburg: Ural. Izd.-Poligraf. Tsentr, 2014.
Zagainov, S.A., Onorin, O.P., Gileva, L.Yu. Volkov, D.N., and Tleugobulov, B.S., Software for flexible blast-furnace operation, Steel Transl., 2000, vol. 30, no. 9, pp. 9–11.
Spirin, N.A., Lavrov, V.V., Rybolovlev, V.Yu., Krasnobaev, A.V., and Onorin, O.P., Model’nye sistemy podderzhki prinyatiya reshenii v ASU TP domennoi plavki (Model Decision Support Systems in the Automated Process Control System of Blast Furnace Smelting), Yekaterinburg: Ural. Fed. Univ., 2011.
Filatov, S.V., Zagainov, S.A., Gileva, L.Yu., and Pykhteeva, K.B., Development of the analysis of iron oxide reduction processes, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2015, no. 9, pp. 658–661.
Shvartsman, A.A. and Zhukhovitskii, A.A., Nachala fizicheskoi khimii dlya metallurgov (Fundamentals of Physical Chemistry for Metallurgists), Moscow: Metallurgiya, 1991.
Shavrin, S.V., Regularities of reduction of iron oxides and modeling of metallurgical processes, in Fizicheskaya khimiya i tekhnologii v metallurgii (Physical Chemistry and Technologies in Metallurgy), Yekaterinburg: Ural. Otd., Ross. Akad. Nauk, 1966, pp. 239–248.
Frolov, Yu.A., Ptichnikov, A.G., Barinov, V.Kh., and Gorshkov, N.N., Method of calculating and analyzing the factors that affect the coke consumption and productivity of blast furnaces at the Chelyabinsk Metallurgical Combine, Metallurgist, 2013, vol. 57, nos. 3–4, pp. 183–193.
Tir’on, K., Suvorov, M., and Shmit, L., On integrated approach for pulverized coal fuel blowing into blast furnaces, Trudy mezhdunarodnogo kongressa domenshchikov “Domennoe proizvodstvo–XXI vek” (Proc. Int. Congr. of Blast Furnace Operators “Blast Furnace Industr in 21st Century”), Moscow, 2014, pp. 80–91.
Lyalyuk, V.P., Tovarovskii, I.G., Demchuk, D.A., et al., Koksozameshchayushchie tekhnologii v domennoi plavke (Coke-Substituting Technologies in Blast Furnace Smelting), Dnepropetrovsk: Porogi, 2006.
Gotlib, A.D., Domennyi protsess (Blast Furnace Process), Moscow: Metallurgiya, 1966.
Filatov, S.V., Zagainov, S.A., Gileva, L.Yu., Kurunov, I.F., and Titov, V.N., Influence of elevated pressure on blast-furnace performance, Steel Transl., 2015, vol. 45, no. 4, pp. 275–278.
Mishchenko, I.M. and Kuzin, A.V., Quality of coke and other important factors for ensuring effective smelting of cast iron using pulverized coal, Chern. Metall., 2014, no. 5, pp. 26–32.
Kitaev, B.I., Yaroshenko, Yu.G., and Lazarev, B.D., Teploobmen v domennoi pechi (Heat Transfer in Blast Furnace), Moscow: Metallurgiya, 1966.
Kitaev, B.I., Timofeev, V.N., Bokovikov, B.A., et al., Teplo- i massoobmen v plotnom sloe (Heat and Mass Transfer in a Dense Layer), Moscow: Metallurgiya, 1972.
Kitaev, B.I., Yaroshenko, Yu.G., Sukhanov, E.L., et al., Teplotekhnika domennogo protsessa (Thermal Engineering of Blast Furnace Process), Moscow: Metallurgiya, 1978.
Spirin, N.A., Shvydkii, V.S., Lobanov, V.I., and Lavrov, V.V., Vvedenie v sistemnyi analiz teplofizicheskikh protsessov metallurgii (Introduction to the System Analysis of Thermophysical Processes in Metallurgy), Yekaterinburg: Ural. Gos. Tekh. Univ., 1999.
Katunin, V.V., Petrakova, T.M., and Ivanova, I.M., Main performance indicators of the Russian ferrous metallurgy in 2015, Chern. Metall., 2016, no. 3, pp. 3–24.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.V. Filatov, S.A. Zagainov, L.Yu. Gileva, I.F. Kurunov, V.N. Titov, 2017, published in Izvestiya Vysshikh Uchebnykh Zavedenii, Chernaya Metallurgiya, 2017, No. 8, pp. 637–642.
About this article
Cite this article
Filatov, S.V., Zagainov, S.A., Gileva, L.Y. et al. Improving the energy efficiency of blast furnaces at PAO NLMK. Steel Transl. 47, 534–537 (2017). https://doi.org/10.3103/S0967091217080046
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091217080046