Abstract
The step-by-step development in the production of HDT580X hot-rolled dual-phase steel (according to the EN 10338 standard) by means of the 2000 broad-strip hot-rolling mill at OAO Novolipetskii Metallurgicheskii Kombinat is considered. The analysis is based on theoretical and experimental results regarding topics such as the influence of alloying elements and the cooling parameters on structural and phase transformations in dual-phase steel for the auto industry. Physical modeling of the deformational parameters and the rolling and cooling temperatures and speeds on the broad-strip mill also proves helpful. Rolling and cooling rates are proposed for the 140 FGA semicontinuous hot-rolling mill.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Shakhpazov, E.Kh. and Rodionova, I.G., Development of high-strength rolled steel for the auto industry, Probl. Chern. Metall. Materialov., 2007, no. 1, pp. 47–52.
Fonshtein, N.M., Practical aspects of the production of dual-phase steel in the 590-MPa strength class, Sb. dokladov mezhdunarodnogo seminara Sovremennye dostizheniya v metallurgii i tekhnologii proizvodstva stalei dlya avtomobil’noi promyshlennosti (Proceedings of an International Seminar on Developments in Metallurgy and Steel Production for the Auto Industry), Moscow, 2004, pp. 128–143.
Tataru, A.S., Potemkin, V.K., Cavalla, R., et al., Production of hot-rolled dual-phase steel for the auto industry with single-step cooling on the exit conveyer of the 2000 broad-strip hot-rolling mill at OAO NLMK, Steel. Trans., 2014, vol. 44, no. 7, pp. 491–498.
López-Baltazar, A., Salinas-Rodriguez, A., and Nava-Vásquez, E., Austenite-ferrite transformation in hot rolled Mn-Cr-Mo dual phase steel, Mater. Sci. Forum, 2007, vol. 560, pp. 79–84.
Mein, A., Fourlarish, G., Crowther, D., and Evans, P.J., The influence of aluminum on the ferrite and micro-structural development in hot-rolled dual-phase steel, Mater. Charact., 2012, vol. 64, pp. 69–78.
Leysen, F., Penning, J., and Houbaert, Y., A view on the strategy in the processing of hot-rolled dual-phase steels, Mater. Sci. Forum, 2010, vols. 638–642, pp. 3343–3349.
Golovanenko, S.A. and Fonshtein, N.M., Dvukhfaznye nizkolegirovannye stali (Dual-Phase Low-Alloy Steel), Moscow: Metallurgiya, 1986.
Makarov, E.V., Hot Rolling of Strip with Forced Cooling, Extended Abstract of Cand. Sci. Dissertation, Moscow Institute of Steel and Alloys, Moscow, 2013.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.S. Lukin, A.V. Dolgov, A.S. Tataru, V.K. Potemkin, R. Cavalla, G. Corpalla, 2014, published in “Stal’,” 2014, No. 10, pp. 54–56.
About this article
Cite this article
Lukin, A.S., Dolgov, A.V., Tataru, A.S. et al. Formation of dual-phase structure during cooling on the exit conveyer of the 2000 broad-strip rolling mill at OAO NLMK. Steel Transl. 44, 776–778 (2014). https://doi.org/10.3103/S096709121410009X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S096709121410009X