Abstract
Ultrasonic vibration grinding differs from traditional grinding in terms of its material removal mechanism. The randomness of grain–workpiece interaction in ultrasonic vibration grinding can produce variable chips and impact the surface roughness of workpiece. However, previous studies used iterative method to calculate the unformed chip thickness (UCT), which has low computational efficiency. In this study, a symbolic difference method is proposed to calculate the UCT. The UCT distributions are obtained to describe the stochastic interaction characteristics of ultrasonic grinding process. Meanwhile, the UCT distribution characteristics under different machining parameters are analyzed. Then, a surface roughness prediction model is established based on the UCT distribution. Finally, the correctness of the model is verified by experiments. This study provides a quick and accurate method for predicting surface roughness in longitudinal ultrasonic vibration grinding.
摘要
目 的
超声振动辅助磨削在材料去除机理上与传统磨削有明显不同. 超声振动辅助磨削中颗粒与工件相互作用的随机性会产生不同形状与厚度的切屑, 然而, 对超声磨削过程中的磨粒-工件相互作用的随机性及与表面粗糙度的关系还有待进一步研究.
创新点
提供一种快速有效的方法预测纵向超声振动磨削加工工件的表面粗糙度.
方 法
1. 采用符号差分法(表1)计算磨粒与工件的干涉深度和宽度, 得到未变形切屑厚度(UCT)分布来描述磨粒与工件相互作用的随机特性. 2. 分析不同磨削参数下UCT厚度分布的特征. 3. 基于UCT分布, 建立表面粗糙度预测模型. 4. 通过实验验证模型的有效性.
结 论
1. 基于超声磨削过程中磨粒的运动轨迹, 提出符号差分法计算磨粒与工件的干涉深度和宽度, 提高仿真效率. 2. 在超声磨削过程中UCT分布服从指数分布; 通过提取不同加工参数下UCT分布的特征参数, 发现超声波的应用可以改变UCT的深度和宽度, 增强重复干涉效应, 以及降低表面粗糙度. 3. 分析磨削参数对UCT分布特性的影响规律发现, 基于UCT均值建立表面粗糙度预测模型得到的实验值与理论值的变化趋势一致, 且最大偏差为14.3%. 4. 高砂轮转速、 低工件速度、 小磨削深度及合适的超声振幅有利于获得较低的UCT, 从而形成较光滑的工件表面.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agarwal S, Venkateswara Rao P, 2005. A probabilistic approach to predict surface roughness in ceramic grinding. International Journal of Machine Tools and Manufacture, 45(6): 609–616. https://doi.org/10.1016/j.ijmachtools.2004.10.005
Agarwal S, Venkateswara Rao P, 2010. Modeling and prediction of surface roughness in ceramic grinding. International Journal of Machine Tools and Manufacture, 50(12): 1065–1076. https://doi.org/10.1016/j.ijmachtools.2010.08.009
Agarwal S, Venkateswara Rao P, 2013. Predictive modeling of force and power based on a new analytical undeformed chip thickness model in ceramic grinding. International Journal of Machine Tools and Manufacture, 65:68–78. https://doi.org/10.1016/j.ijmachtools.2012.10.006
Chen FJ, Yin SH, Huang H, et al., 2010. Profile error compensation in ultra-precision grinding of aspheric surfaces with on-machine measurement. International Journal of Machine Tools and Manufacture, 50(5):480–486. https://doi.org/10.1016/j.ijmachtools.2010.01.001
Chen HF, Tang JY, Zhou W, 2013. Modeling and predicting of surface roughness for generating grinding gear. Journal of Materials Processing Technology, 213(5):717–721. https://doi.org/10.1016/j.jmatprotec.2012.11.017
Chen HF, Tang JY, Deng ZH, et al., 2018. Modeling and predicting surface topography of the ultrasonic assisted grinding process considering ploughing action. Journal of Mechanical Engineering, 54(21):231–240 (in Chinese). https://doi.org/10.3901/jme.2018.21.231
Darafon A, Warkentin A, Bauer R, 2013. 3D metal removal simulation to determine uncut chip thickness, contact length, and surface finish in grinding. The International Journal of Advanced Manufacturing Technology, 66(9–12): 1715–1724. https://doi.org/10.1007/s00170-012-4452-1
Ding WF, Dai CW, Yu TY, et al., 2017. Grinding performance of textured monolayer CBN wheels: undeformed chip thickness nonuniformity modeling and ground surface topography prediction. International Journal of Machine Tools and Manufacture, 122:66–80. https://doi.org/10.1016/j.ijmachtools.2017.05.006
Ding WF, Cao Y, Zhao B, et al., 2022. Research status and future prospects of ultrasonic vibration-assisted grinding technology and equipment. Journal of Mechanical Engineering, 58(9):244–269 (in Chinese). https://doi.org/10.3901/JME.2022.09.244
Gong YD, Wang B, Wang WS, 2002. The simulation of grinding wheels and ground surface roughness based on virtual reality technology. Journal of Materials Processing Technology, 129(1–3):123–126. https://doi.org/10.1016/S0924-0136(02)00589-7
He YH, Wan RQ, Zhou JJ, et al., 2017. Modeling for surface roughness of hard and brittle materials in axial ultrasonic vibration grinding. Journal of Vibration and Shock, 36(23): 194–200 (in Chinese). https://doi.org/10.13465/j.cnki.jvs.2017.23.029
Hecker RL, Liang SY, 2003. Predictive modeling of surface roughness in grinding. International Journal of Machine Tools and Manufacture, 43(8):755–761. https://doi.org/10.1016/s0890-6955(03)00055-5
Malkin S, Guo CS, 2008. Grinding Technology: Theory and Applications of Machining with Abrasives, 2nd Edition. Industrial Press, New York, USA, p.115–156.
Setti D, Arrabiyeh PA, Kirsch B, et al., 2020. Analytical and experimental investigations on the mechanisms of surface generation in micro grinding. International Journal of Machine Tools and Manufacture, 149:103489. https://doi.org/10.1016/j.ijmachtools.2019.103489
Tao HF, Liu YH, Zhao DW, et al., 2022. Undeformed chip width non-uniformity modeling and surface roughness prediction in wafer self-rotational grinding process. Tribology International, 171:107547. https://doi.org/10.1016/j.triboint.2022.107547
Wang QY, Liang ZQ, Wang XB, et al., 2017. Research on modeling and simulation of surface microtopography in ultrasonic vibration spiral grinding. Journal of Mechanical Engineering, 53(19):83–89 (in Chinese). https://doi.org/10.3901/jme.2017.19.083
Wang QY, Liang ZQ, Wang XB, et al., 2020. Modelling and analysis of generation mechanism of micro-surface topography during elliptical ultrasonic assisted grinding. Journal of Materials Processing Technology, 279:116585. https://doi.org/10.1016/j.jmatprotec.2019.116585
Yang ZC, Zhu LD, Zhang GX, et al., 2020. Review of ultrasonic vibration-assisted machining in advanced materials. International Journal of Machine Tools and Manufacture, 156: 103594. https://doi.org/10.1016/j.ijmachtools.2020.103594
Zhang K, Yin Z, Dai CW, et al., 2022. Undeformed chip thickness characteristics in grain-workpiece contact zone in ultrasonic vibration assisted grinding. Diamond & Abrasives Engineering, 42(1):88–96 (in Chinese). https://doi.org/10.13394/j.cnki.jgszz.2021.0109
Zhang XF, Yang L, Wang Y, et al., 2020. Mechanism study on ultrasonic vibration assisted face grinding of hard and brittle materials. Journal of Manufacturing Processes, 50: 520–527. https://doi.org/10.1016/j.jomapro.2020.01.003
Zhang YZ, Fang CF, Huang GQ, et al., 2018. Modeling and simulation of the distribution of undeformed chip thicknesses in surface grinding. International Journal of Machine Tools and Manufacture, 127:14–27. https://doi.org/10.1016/j.ijmachtools.2018.01.002
Zhou WH, Tang JY, Chen HF, et al., 2018. A comprehensive investigation of plowing and grain-workpiece micro interactions on 3D ground surface topography. International Journal of Mechanical Sciences, 144:639–653. https://doi.org/10.1016/j.ijmecsci.2018.06.024
Zhou WH, Tang JY, Chen HF, et al., 2019. A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding. International Journal of Mechanical Sciences, 156:14–30. https://doi.org/10.1016/j.ijmecsci.2019.03.026
Zhou X, Xi F, 2002. Modeling and predicting surface roughness of the grinding process. International Journal of Machine Tools and Manufacture, 42(8):969–977. https://doi.org/10.1016/S0890-6955(02)00011-1
Acknowledgments
This work is supported by the National Key Research and Development Program of China (No. 2018YFB2000402), the Open Fund Project of Xinchang Research Institute of Zhejiang University of Technology, and the Fundamental Research Funds for the Universities of Henan Province, China (No. NSFRF200102).
Author information
Authors and Affiliations
Contributions
Yanqin LI investigated and wrote the original draft. Daohui XIANG processed the corresponding data. Guofu GAO helped organize the manuscript. Feng JIAO helped modify the manuscript. Bo ZHAO designed the research.
Corresponding author
Ethics declarations
Yanqin LI, Daohui XIANG, Guofu GAO, Feng JIAO, and Bo ZHAO declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Li, Y., Xiang, D., Gao, G. et al. Prediction of undeformed chip thickness distribution and surface roughness in ultrasonic vibration grinding of inner hole of bearings. J. Zhejiang Univ. Sci. A 25, 311–323 (2024). https://doi.org/10.1631/jzus.A2200609
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A2200609
Key words
- Ultrasonic vibration grinding
- Undeformed chip thickness (UCT)
- Distribution characteristics
- Surface roughness