Abstract
Corrosion of reinforcement has a significant effect on the deformation of reinforced concrete beams by deteriorating the bond-slip characteristics, diminishing the cross-sectional area of reinforcement, and causing cracking. The traditional way of quantifying the load capacity and simulating deflection is the moment-curvature (M/χ) approach. The problem is that the M/χ approach is semi-empirical after cracking as it is strain-based and cannot allow for tension stiffening. This paper introduces the new displacement-based moment-rotation (M/θ) approach which directly simulates the development of cracks and hence allows for tension stiffening. This M/θ approach is then used to predict the load-deflection behavior of reinforced concrete beams with corrosion effect by incorporating the corrosion-affected bond-slip model. The bond-slip model only considers the corrosion effect but ignores the confinement effect. It is used here as an example to describe the procedure of how to quantify the corrosion effect on reinforced concrete beam behavior. The load-deflection curves obtained from the numerical simulation show a good agreement with test results. For reinforced concrete beams with confinement, the only difference is to replace the bond-slip model with the one which includes both corrosion and stirrup effects. Additionally, the paper shows how to use the M/θ approach with the bond-slip model to predict the real corrosion level of reinforcement in some tests in which only the theoretical corrosion levels are provided.
概要
目的
探讨在钢筋开始锈蚀后的混凝土梁荷载-挠度特性的变化, 并利用荷载-挠度曲线反推钢筋锈蚀程度, 进而为预测锈蚀钢筋混凝土结构行为提供新的依据.
创新点
1. 通过模拟钢筋混凝土的粘结滑移, 建立计算荷载-挠度特性的数值方法. 2. 利用新建立的方法, 评估结构内部钢筋锈蚀程度.
方法
1. 通过模拟钢筋与混凝土之间的粘结滑移作用, 得到端部滑移量对应的作用于钢筋上的荷载值. 2. 将滑移量-荷载值关系导入钢筋混凝土梁的荷载-挠度曲线模型中, 对受拉区混凝土开裂前后的钢筋混凝土梁的荷载-挠度曲线关系进行模拟. 3. 在不同钢筋锈蚀程度下对已知荷载-挠度关系曲线的钢筋混凝土梁进行荷载-挠度曲线计算, 拟合出相似的荷载-挠度曲线, 进而预测结构内部的钢筋锈蚀程度.
结论
1. 随着钢筋锈蚀程度的不断增加, 钢筋混凝土梁的承载力明显下降. 2. 钢筋与混凝土的粘结滑移可以模拟钢筋锈蚀加剧后的挠度发展变化. 3. 利用新建立的数值方法可以有效地预测结构内部的钢筋锈蚀程度.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Almusallam AA, Al-Gahtani AS, Aziz AR, et al., 1996a. Effect of reinforcement corrosion on bond strength. Construction and Building Materials, 10(2):123–129. https://doi.org/10.1016/0950-0618(95)00077-1
Almusallam AA, Al-Gahtani AS, Aziz AR, et al., 1996b. Effect of reinforcement corrosion on flexural behavior of concrete slabs. Journal of Materials in Civil Engineering, 8(3):123–127. https://doi.org/10.1061/(asce)0899-1561(1996)8:3(123)
Al-Sulaimani GJ, Kaleemullah M, Basunbul IA, et al., 1990. Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members. ACI Structural Journal, 87(2):220–231.
Branson DE, 1977. Deformation of Concrete Structures. McGraw-Hill, New York, USA.
Cabrera JG, 1996. Deterioration of concrete due to reinforcement steel corrosion. Cement and Concrete Composites, 18(1):47–59. https://doi.org/10.1016/0958-9465(95)00043-7
Chapman RA, Shah SP, 1987. Early-age bond strength in reinforced concrete. ACI Materials Journal, 84(6):501–510.
Dekoster M, Buyle-Bodin F, Maurel O, et al., 2003. Modelling of the flexural behaviour of RC beams subjected to localised and uniform corrosion. Engineering Structures, 25(10):1333–1341. https://doi.org/10.1016/S0141-0296(03)00108-1
Fang CQ, Lundgren K, Chen LG, et al., 2004. Corrosion influence on bond in reinforced concrete. Cement and Concrete Research, 34(11):2159–2167. https://doi.org/10.1016/j.cemconres.2004.04.006
Fang CQ, Lundgren K, Plos M, et al., 2006. Bond behaviour of corroded reinforcing steel bars in concrete. Cement and Concrete Research, 36(10):1931–1938. https://doi.org/10.1016/j.cemconres.2006.05.008
Feng Q, Visintin P, Oehlers DJ, 2016. Deterioration of bond-slip due to corrosion of steel reinforcement in reinforced concrete. Magazine of Concrete Research, 68(15):768–781. https://doi.org/10.1680/jmacr.15.00217
Feng Q, Visintin P, Oehlers DJ, 2018. Effect of steel bar corrosion on flexural behaviour through bond. Proceedings of the Institution of Civil Engineers-Structures and Buildings, 171(5):380–394. https://doi.org/10.1680/jstbu.16.00168
FIB, 2013. FIB Model Code for Concrete Structures 2010. Ernst & Sohn, Berlin, Germany. https://doi.org/10.1002/9783433604090
Fu X, Chung DDL, 1997. Effect of corrosion on the bond between concrete and steel rebar. Cement and Concrete Research, 27(12):1811–1815. https://doi.org/10.1016/S0008-8846(97)00172-5
Gilbert RI, Mickleborough NC, 1990. Design of Prestressed Concrete. Unwin Hyman Ltd., London, UK.
Haskett M, Oehlers DJ, Ali MSM, 2008. Local and global bond characteristics of steel reinforcing bars. Engineering Structures, 30(2):376–383. https://doi.org/10.1016/j.engstruct.2007.04.007
Haskett M, Oehlers DJ, Ali MSM, et al., 2009. Rigid body moment-rotation mechanism for reinforced concrete beam hinges. Engineering Structures, 31(5):1032–1041. https://doi.org/10.1016/j.engstruct.2008.12.016
Hognestad E, Hanson NW, McHenry D, 1955. Concrete stress distribution in ultimate strength design. Journal Proceedings, 52(12):455–480.
Jiang C, Wu YF, Dai MJ, 2018. Degradation of steel-to-concrete bond due to corrosion. Construction and Building Materials, 158:1073–1080. https://doi.org/10.1016/j.conbuildmat.2017.09.142
Jin WL, Zhao YX, 2001. Effect of corrosion on bond behavior and bending strength of reinforced concrete beams. Journal of Zhejiang University-SCIENCE, 2(3):298–308. https://doi.org/10.1631/jzus.2001.0298
Johnston B, Cox KC, 1940. The bond strength of rusted deformed bars. Journal Proceedings, 37:57–72.
Knight D, Visintin P, Oehlers DJ, et al., 2013. Incorporating residual strains in the flexural rigidity of RC members with varying degrees of prestress and cracking. Advances in Structural Engineering, 16(10):1701–1718. https://doi.org/10.1260/1369-4332.16.10.1701
Knight D, Visintin P, Oehlers DJ, et al., 2014. Short-term partial-interaction behavior of RC beams with prestressed FRP and steel. Journal of Composites for Construction, 18(1):04013029. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000408
Knight D, Visintin P, Oehlers DJ, 2015. Displacement-based simulation of time-dependent behaviour of RC beams with prestressed FRP or steel tendons. Structural Concrete, 16(3):406–417. https://doi.org/10.1002/suco.201400039
Lee HS, Noguchi T, Tomosawa F, 1998. Fundamental study on evaluation of structural performance of reinforced concrete beam damaged by corrosion of longitudinal tensile main rebar by finite element method. Journal of Structural and Construction Engineering, 506:43–50.
Lee HS, Noguchi T, Tomosawa F, 2002. Evaluation of the bond properties between concrete and reinforcement as a function of the degree of reinforcement corrosion. Cement and Concrete Research, 32(8):1313–1318. https://doi.org/10.1016/S0008-8846(02)00783-4
Lin HW, Zhao YX, Feng P, et al., 2019. State-of-the-art review on the bond properties of corroded reinforcing steel bar. Construction and Building Materials, 213:216–233. https://doi.org/10.1016/j.conbuildmat.2019.04.077
Lundgren K, 2002. Modelling the effect of corrosion on bond in reinforced concrete. Magazine of Concrete Research, 54(3):165–173. https://doi.org/10.1680/macr.2002.54.3.165
Mangat PS, Elgarf MS, 1999. Flexural strength of concrete beams with corroding reinforcement. Structural Journal, 96(1):149–158.
Muhamad R, Ali MSM, Oehlers DJ, et al., 2011. Load-slip relationship of tension reinforcement in reinforced concrete members. Engineering Structures, 33(4):1098–1106. https://doi.org/10.1016/j.engstruct.2010.12.022
Muhamad R, Ali MSM, Oehlers DJ, et al., 2012. The tension stiffening mechanism in reinforced concrete prisms. Advances in Structural Engineering, 15(12):2053–2069. https://doi.org/10.1260/1369-4332.15.12.2053
Nawy EG, 2006. Prestressed Concrete: a Fundamental Approach, 5th Edition. Prentice Hall, Upper Saddle River, USA.
Oehlers DJ, Liu IST, Seracino R, 2005. The gradual formation of hinges throughout reinforced concrete beams. Mechanics Based Design of Structures and Machines, 33(3–4):373–398. https://doi.org/10.1080/15367730500458234
Oehlers DJ, Ali MSM, Haskett M, et al., 2011. FRP-reinforced concrete beams: unified approach based on IC theory. Journal of Composites for Construction, 15(3):293–303. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000173
Oehlers DJ, Muhamad R, Ali MSM, 2013. Serviceability flexural ductility of FRP RC beams: a discrete rotation approach. Construction and Building Materials, 49:974–984. https://doi.org/10.1016/j.conbuildmat.2012.10.001
Peattie KR, Pope JA, 1956. Effect of age of concrete on bond resistance. Journal Proceedings, 52(2):661–672.
Tasdemir MA, Tasdemir C, Akyüz S, et al., 1998. Evaluation of strains at peak stresses in concrete: a three-phase composite model approach. Cement and Concrete Composites, 20(4):301–318. https://doi.org/10.1016/S0958-9465(98)00012-2
Thompson KJ, Park R, 1980. Ductility of prestressed and partially prestressed concrete beam sections. PCI Journal, 25(2):46–70. https://doi.org/10.15554/pcij.03011980.46.70
Tondolo F, 2015. Bond behaviour with reinforcement corrosion. Construction and Building Materials, 93:926–932. https://doi.org/10.1016/j.conbuildmat.2015.05.067
Visintin P, Oehlers DJ, Wu C, et al., 2012. A mechanics solution for hinges in RC beams with multiple cracks. Engineering Structures, 36:61–69. https://doi.org/10.1016/j.engstruct.2011.11.028
Visintin P, Oehlers DJ, Muhamad R, et al., 2013a. Partial-interaction short term serviceability deflection of RC beams. Engineering Structures, 56:993–1006. https://doi.org/10.1016/j.engstruct.2013.06.021
Visintin P, Oehlers DJ, Haskett M, 2013b. Partial-interaction time dependent behaviour of reinforced concrete beams. Engineering Structures, 49:408–420. https://doi.org/10.1016/j.engstruct.2012.11.025
Visintin P, Sturm AB, Oehlers DJ, 2018. Long- and short-term serviceability behavior of reinforced concrete beams: mechanics models for deflections and crack widths. Structural Concrete, 19(2):489–507. https://doi.org/10.1002/suco.201700022
Warner RF, Rangan BV, Hall AS, et al., 1998. Concrete Structures. Longman, Melbourne, Australia.
Yalciner H, Eren O, Sensoy S, 2012. An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level. Cement and Concrete Research, 42(5):643–655. https://doi.org/10.1016/j.cemconres.2012.01.003
Author information
Authors and Affiliations
Contributions
Qian FENG and Rong-qiao XU designed the research. Qian FENG and Yong-ping ZHANG processed the corresponding data. Qian FENG wrote the first draft of the manuscript. Guan-nan WANG and Rong-qiao XU helped to organize the manuscript. Qian FENG and Rong-qiao XU revised and edited the final version.
Corresponding author
Additional information
Conflict of interest
Qian FENG, Guan-nan WANG, Yong-ping ZHANG, and Rong-qiao XU declare that they have no conflict of interest.
Project supported by the National Natural Science Foundation of China (No. 51478422)
Rights and permissions
About this article
Cite this article
Feng, Q., Wang, Gn., Zhang, Yp. et al. Numerical simulation of partial-interaction load-deflection behavior of corroded reinforced concrete beams based on a segmental approach and evaluation of reinforcement corrosion level. J. Zhejiang Univ. Sci. A 21, 280–293 (2020). https://doi.org/10.1631/jzus.A1900616
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A1900616