Effect of Morphology-based Defect Structure of ZnO Nanostructures in Photo-Degradation of Organic Dye

Abstract

The fabrication of strong photocatalysts applied to the degradation of organic pollutants is necessary in environmental applications. In a single-stage method, acetate precursor and poly vinyl pyrolydine are used to produce ZnO nanostructures with various morphologies in annealing temperatures ranging from 300 °C to 900 ^oC. The physical properties of the prepared nanostructures were characterized by SEM, XRD and PL spectroscopy. The SEM images exhibit a variety of the as-prepared hexagonal zinc oxides including wires, rods, particles and porous network of welded particles of ZnO nanoparticles. The results of the photocatalytic degradation of methylene blue as an organic dye in aqueous suspension showed that the morphology of ZnO nanostructures influences on the photocatalytic efficiency of ZnO nanostructures, greatly. For the best result, the highest MB degradation occurs by ZnO nanowires within 16 minutes and in others samples, degradation of higher than 95 percent occurs within 20 minutes. The XRD and PL spectroscopy revealed neither V_Zn nor O_i are in all of samples but only V_O⁻, V_O²⁻ and Zn_i exist in ZnO nanostructures.