References
Eisenberg, S.; Reinhold, P.; Wolff, J.: Einfluss des metallurgischen Reinheitsgrades auf die Lebensdauer von Radlagern, DVM-Tag 2007, „Reifen, Räder, Naben, Bremsen“, 9. – 11. May 2007, Berlin
Schifferl, H.; Zamberger, S.; Jöller, A.: Alternative Alloying Concepts for Heat-treatable Engineering Steels. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Hippenstiel, F. : Improvement Working and Utility Properties of Classical and New Mo-alloyed Carburizing Steels. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Riedner, S.; van Soest, F.; Kunow, S.: B-alloyed Quench and Temper Steels – an Option to Classic CrMo and CrNiMo Quench and Temper Steels. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Janßen, P.; Engineer, S.: New Metallurgical Concepts for Improving Machinability of Steels. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Raedt, H.-W.: Schmiedewerkstoffe bauen ihren Vorsprung aus. In: Konstruktion April 4-2005
Erisir, E.; Prahl, U.; Trute, S.; Bleck, W.: Entwicklungspotenzial schweißgeeigneter Feinkornbaustähle zum Einsatz in geschmiedeten Strukturbauteilen. Bericht, Institut für Eisenhüttenkunde (IEHK), RWTH Aachen, 2006
Keul, C.; Mosecker, L.; Bleck, W.; Rekersdrees, T.; Stüber, A.; Schliephake, H.; Beyer, C., Raedt, H.-W.: New Developments in the Material and Process Design of Forged Components in the Automobile Industry. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Projekt AVIF A 228: Neue Werkstoffe und angepasste Prozessketten für höherfeste Stahlwerkstoffe (AFP) in geschmiedeten Strukturbauteilen. Industrieverband Massivumformung (IMU), 2006
Projekt IFG 260 ZN: Effiziente Prozessketten und neue hochfeste (bainitische) Stähle zur flexiblen Darstellung hoch beanspruchter Strukturbauteile (HDB-Schmiedestahl, Bainite). Industrieverband Massivumformung (IMU), 2007
Engineer, S.; Justinger, H.; Janßen, P.; Härtel, M.; Hampel, C.; Randelhoff, F.: Technological Properties of the New High Strength Bainitic Steel 20MnCrMo7. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Biermann, D.; Felderhoff, F.; Engineer, S.; Justinger, H.: Machinability of High-strength Bainitic Steel 20MnCrMo7. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Sugimoto, K.-I.; Yoshikawa, N.: Advanced High-Strength Trip-Aided Steels for Ultra High Pressure DI-Diesel Engine Common Rail. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, 2011
Sugimoto, K.-I.; Kobayashi, J.; Arai, G.: Development of Ultra High-strength Low Alloy Trip-aided Steel for Hot-forging Parts. Steel Research Int. 81 (2010), No. 9, pp. 254 – 257
Projekt IGF 374 ZN: Schmiedestähle mit verbesserter Betriebsfestigkeit durch verformungsinduzierte Phasenumwandlung (Trip-Effekt)“. Industrieverband Massivumformung (IMU), 2011
Haglund, S.: Influence of Inclusions in Steels during Fatigue. Jernkontorets Forskning, D 801, 2004
Schuster, A.; Raedt, H.-W.; Tekkaya, A. E.: Influence of a Forging Operation on the Deformation of Inclusions. 10th ICTP Aachen, Sep. 25 – 30, 2011
Forschungsprojekt AVIF A 245: Einfluss von Faserverlauf und Gefüge auf die Schwingfestigkeit warmmassivumgeformter AFP-Stähle. Industrieverband Massivumformung (IMU), 2007
Murakami, Y.: Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions. Butterworth Heinemann, 2002
Gänser, H.-P.; Leitgeb, A.; Glinser, K.; Leitner, H.; Eichlseder, W.: Einfluss von Imperfektionen auf die Schwingfestigkeit von Bauteilen. 39. Tagung DVM-Arbeitskreis Bruchvorgänge „Bruchmechanik und Bauteilsicherheit“, 13. – 14. Feb. 2007, Dresden
Fluch, R.: A High-strength and Super Clean Heat-treatable Steel for Application in the Automotive Industry. 3rd International SCT Conference Steels for Cars and Trucks, June 5 – 9, 2011, Salzburg, Austria, 2011
Konovalov, S.; Clausen, B.; Hoffmann, F.; Zoch, H.-W.; Prahl, U.; Bleck, W.: Simulation der Partikelentwicklung entlang der Prozesskette geschmiedeter und einsatzgehärteter Bauteile aus mikrolegiertem 18CrNiMo7-6. HTM – Journal of Heat Treatment and Materials, 01/2011
Isogawa, S.: Current Status and Future Prospect of Controlled Cooling, Proceedings of the 11th Asian Symposium on Precision Forging, (ASPF2010), Kyoto, Japan, October 24 – 27, 2010
Valiev, R. Z.; Zehetbauer, M.; Estrin, Y.; Höppel, H. W.; Ivanisenko, Y.; Hahn, H.; Wilde, G.; Roven, H. J.; Sauvage, X.; Langdon, T.: The Innovation Potential of Bulk Nanostructured Materials. Advanced Engineering Materials 2007, 9, No. 7
Raedt, H.-W.; Speckenheuer, U.; Vollrath, K.: Massivumgeformte Stähle – Neue ressourcen- und energieeffiziente Lösungen für leistungsfähigere Bauteile. ISBN 978-3-928726-28-3, Industrieverband Massivumformung (IMU), Hagen, 2012, www.metalform.de
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Raedt, HW., Speckenheuer, U. & Vollrath, K. New Forged Steels Energy-efficient Solutions for Stronger Parts. ATZ Autotechnol 12, 12–17 (2012). https://doi.org/10.1365/s35595-012-0089-9
Published:
Issue Date:
DOI: https://doi.org/10.1365/s35595-012-0089-9