Abstract.
Researches are showing that photovoltaic cell equivalent model parameters are not constant and are sensitive to climatic conditions changes. An improved algorithm for multi-photovoltaic cells manufacturing technologies to estimate those parameters is presented in this paper. The method allows a dynamic model for the PV cell according to different climatic conditions. This method shows a better performance of the model for several technologies (poly-crystalline, mono-crystalline and amorphous) of the PV module. Simulated I -V curves are compared to experimental characteristics and other estimation methods for different PV modules and different technologies. Some considerations about the impact of the variations of these resistances on the PV module performance are drawn.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
V. Khanna, B.K. Das, D. Bisht, Vandana, P.K. Singh, Renew. Energy 78, 105 (2015)
V. Lo Brano, A. Orioli, G. Ciulla, A. Di Gangi, Sol. Energy Mater. Sol. Cells 94, 1358 (2010)
N. Rajasekar, Neeraja Krishna Kumar, Rini Venugopalan, Sol. Energy 97, 255 (2013)
T. Ikegami, T. Maezono, F. Nakanishi, Y. Yamagata, K. Ebihara, Sol. Energy Mater. Sol. Cells 67, 389 (2001)
Giuseppina Ciulla, Valerio Lo Brano, Vincenzo Di Dio, Giovanni Cipriani, Renew. Sustain. Energy Rev. 32, 684 (2014)
M.U. Siddiqui, M. Abido, Appl. Soft Comput. 13, 4608 (2013)
Kashif Ishaque, Zainal Salam, Hamed Taheri, Simul. Modell. Pract. Theory 19, 1613 (2011)
Kashif Ishaque, Zainal Salam, Hamed Taheri, Sol. Energy Mater. Sol. Cells 95, 586 (2011)
Carlos R. Sánchez Reinoso, Diego H. Milone, Román H. Buitrago, Appl. Energy 103, 278 (2013)
Adel A. Elbaset, Hamdi Ali, Montaser Abd-El Sattar, Sol. Energy Mater. Sol. Cells 130, 442 (2014)
W. De Soto, Improvement and validation of a model for photovoltaic array performance, MS Thesis, Mechanical Engineering, University of Wisconsin-Madison (2004)
W. De Soto, S.A. Klein, W.A. Beckman, Sol. Energy 80, 78 (2006)
P. Grunow, Weak light performance and annual yields PV modules and systems as a result of the basic parameter set of industrial solar cells, in 19th European Photovoltaic Solar Energy Conference, 7-11 June 2004, France
D.F. Alam, D.A. Yousri, M.B. Eteiba, Energy Convers. Manag. 101, 410 (2015)
C. Carrero, J. Rodriguez, D. Ramirez, C. Platero, Renew. Energy 35, 1103 (2010)
Amal Marrekchi, Souhir Sallem, Giuseppe Marco Tina, Mohamed Ben ali Kammoun, A new five parameters estimation method for two diod model of PV module, in 6th IREC2015 International Renewable Energy Congress (IEEE, 2015) DOI:10.1109/IREC.2015.7110947
Lotfi Khemissi, Brahim Khiari, Ridha Andoulsi, Adnane Cherif, Sol. Energy 86, 1129 (2012)
K. Ishaque, Z. Salam, H. Taheri, J. Power Electron. 11, 179 (2011)
Kashif Ishaque, Zainal Salam, Syafaruddin, Sol. Energy 85, 2217 (2011)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sallem, S., Marrekchi, A., Kammoun, S. et al. Multi-PV technologies method for parameters estimation of two-diode model. Eur. Phys. J. Plus 131, 418 (2016). https://doi.org/10.1140/epjp/i2016-16418-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epjp/i2016-16418-6