Abstract
The biomimetic method is used to obtain hydroxyapatite (HAP) coatings on Ti6Al4V, Ti and AISI 316L SS substrates. These substrates with different pretreatment surface operations (HNO3, anodic polarization, base-acid) were immersed in concentrated simulated body fluids (SBF) for different days at physiologic conditions of 37°C, initial pH of 7.4. Then the corrosion behaviours of substrates after immersion in concentrated SBF were examined by electrochemical methods in Ringer’s and 0.9 wt% NaCl solutions at a temperature of 37°C. Ions concentrations and pH analyses were carried out after incubation in concentrated SBF. After immersion in SBF for different days, the surface morphology remains almost unchanged and no apatite formation is observed. Corrosion currents of substrates increased after immersion. Ions concentrations and pH values were shown variability according to soaking time and pretreatment surface operations.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bharati, S., Sinha, M., and Basu, D., Bull. Mater. Sci., 2005, vol. 28, p. 617.
Barrere, F., van Blitterswijk, C., de Groot, K., and Layrolle, P., Biomaterials, 2002, vol. 23, p. 2211.
Barriere, F., Layrolle, P., van Blitterswijk, C., et al., Bone, 1999, vol. 25, p. 107S.
Bigi, A., Boanini, E., Bracci Facchini, A., et al., Biomaterials, 2005, vol. 26, p. 4085.
Faure, J., Balamurugan, A., Benhayoune, H., et al., Mater. Sci. Eng.: C, 2009, vol. 29, p. 1252.
Anawati Tanigawa, H., Asoh, H., Ohno, T., et al., Corros. Sci., 2013, vol. 70, p. 212.
Jankovic, A., Erakovic, S., Mitric, M., et al., J. Alloys Compd., 2014, vol. 624, p. 148.
Mohseni, E., Zalnezhad, E., and Bushroa, A., Int. J. Adhes. Adhes., 2014, vol. 48, p. 238.
Pasinli, A., Yuksel, M., Celik, E., et al., Acta Biomater., 2010, vol. 6, p. 2282.
Stoch, A., Jastrzebski, W., Brozek, A., et al., J. Mol. Struct., 2000, vol. 555, p. 375.
Yanovska, A., Kuznetsov, V., Stanislavov, A., et al., Surf. Coat. Technol., 2011, vol. 205, p. 5324.
Yoon Il-Kyu, Hwang Ji-Young, Jang Won-Cheoul, et al., Appl. Surf. Sci., 2014, vol. 301, p. 401.
Sutha, S., Kavitha, K., Karunakaran, G., and Rajendran, V., Mater. Sci. Eng.: C, 2013, vol. 33, p. 4046.
Swetha, M., Sahithi, K., Moorthi, A., et al., Int. J. Biol. Macromol., 2010, vol. 47, p. 1.
Cai, Q., Feng, Q., Liu, H., and Yang, X., Mater. Lett., 2013, vol. 91, p. 275.
McLeod, K., Kumar, S., Dutta, N.K., et al., Appl. Surf. Sci., 2010, vol. 256, p. 7178.
Minh, D.P., Nzihou, A., and Sharrock, P., Mater. Res. Bull., 2014, vol. 60, p. 292.
Mohseni, E., Zalnezhad, E., and Bushroa, A.R., Int. J. Adhes. Adhes., 2014, vol. 48, p. 238.
Sadjadi, M.S., Meskinfam, M., Sadeghi, B., et al., Mater. Chem. Phys., 2010, vol. 124, p. 217.
Štulajterova, R. and Medvecky, L., Colloids Surf., A, 2008, vol. 316, p. 104.
Hashizume, M., Nagasawa, Y., Suzuki, T., et al., Colloids Surf., B, 2011, vol. 84, p. 545.
Gao, F., Xu, C., Hu, H., et al., Mater. Lett., 2015, vol. 138, p. 25.
Gu, Y.W., Khor, K.A., and Cheang, P., Biomaterials, 2003, vol. 24, p. 1603.
Chu, C.L., Pu, Y.P., Yin, L.H., et al., Mater. Lett., 2006, vol. 60, p. 3002.
Zhang, Q. and Leng, Y., Biomaterials, 2005, vol. 26, p. 3853.
Costa, D.O., Allo, B.A., Klassen, R., et al., Langmuir, 2012, vol. 28, p. 3871.
Colovic, B., Jokanovic, V., Jokanovic, B., and Jovic, N., Ceram. Int., 2014, vol. 40, p. 6949.
Habibovic, P., Barrère, F., van Blitterswijk, C.A., et al., J. Am. Ceram. Soc., 2002, vol. 85, p. 517.
Chen, X., Li, Y., Hodgson, P.D., and Wen, C., Mater. Sci. Eng.: C, 2009, vol. 29, p. 165.
Gu, Y.W., Tay, B.Y., Lim, C.S., and Yong, M.S., Biomaterials, 2005, vol. 26, p. 6916.
Jalota, S., Bhaduri, S.B., and Tas, A.C., Mater. Sci. Eng.: C, 2008, vol. 28, p. 129.
Holzwarth, J.M. and Ma, P.X., Biomaterials, 2011, vol. 32, p. 9622.
Tas, A.C., J. Eur. Ceram. Soc., 2000, vol. 20, p. 2389.
Kokubo, T. and Takadama, H., Biomaterials, 2006, vol. 27, p. 2907.
Jonasova, L., Muüller, F.A., Helebrant, A., et al., Biomaterials, 2004, vol. 25, p. 1187.
Khor, K.A., Li, H., Cheang, P., and Boey, S.Y., Biomaterials, 2003, vol. 24, p. 723.
Saiz, E., Goldman, M., Gomez-Vega, J.M., et al., Biomaterials, 2002, vol. 23, p. 3749.
Ning, C.Q. and Zhou, Y., Biomaterials, 2002, vol. 23, p. 2909.
Büyüksagis, A., Çiftci, N., Ergün, Y., and Kayali, Y., Prot. Met. Phys. Chem. Surf., 2011, vol. 47, p. 670.
Lin, C.M. and Yen, S.K., Mater. Sci. Eng.: C, 2006, vol. 26, p. 54.
Wei, D. and Zhou, Y., Ceram. Int., 2009, vol. 35, p. 2343.
Forsgren, J., Svahn, F., Jarmar, T., and Engqvist, H., Acta Biomater., 2007, vol. 3, p. 980.
Ciobanu, G., Carja, G., and Ciobanu, O., Surf. Coat. Technol., 2008, vol. 202, p. 2467.
Lluch, A.V., Ferrer, G.G., and Pradas, M.M., Colloids Surf., B, 2009, vol. 70, p. 218.
Kannan, S., Balamurugan, A., and Rajeswari, S., Electrochim. Acta, 2004, vol. 49, p. 2395.
Krupa, D., Baszkiewicz, J., Sobczak, J.W., et al., J. Mater. Process. Technol., 2003, vol. 144, p. 158.
Balamurugan, A., Balossier, G., Kannan, S., et al., Ceram. Int., 2007, vol. 33, p. 605.
Ding, S.J., Huang, T.H., and Kao, C.T., Surf. Coat. Technol., 2003, vol. 165, p. 248.
Rigo, E.C.S., Boschi, A.O., Yoshimoto, M., et al., Mater. Sci. Eng.: C, 2004, vol. 24, p. 647.
Jalota, S., Bhaduri, S., and Tas, A., Mater. Sci. Eng.: C, 2007, vol. 27, p. 432.
Müller, L. and Müller, F., Acta Biomater., 2006, vol. 2, p. 181.
Xiao, X.F., Tian, T., Liu, R.F., and She, H., Mater. Chem. Phys., 2007, vol. 106, p. 27.
Shi, Y., Downes, M., Xie, W., et al., Genes Dev., 2001, vol. 15, p. 1140.
Bohner, M. and Lemaitre, J., Biomaterials, 2009, vol. 30, p. 2175.
Oliveira, A.L., Costa, S.A., Sousa, R.A., and Reis, R.L., Acta Biomater., 2009, vol. 5, p. 1626.
Sánchez-Salcedo, S., Balas, F., Izquierdo-Barba, I., and Vallet-Regi, M., Acta Biomater., 2009, vol. 5, p. 2738.
Li, F., Feng, Q.L., Cui, F.Z., et al., Surf. Coat. Technol., 2002, vol. 154, p. 88.
Chou, Y.F., Chiou, W.A., Xu, Y., et al., Biomaterials, 2004, vol. 25, p. 5323.
Uchida, M., Kim, H.M., Kokubo, T., et al., J. Biomed. Mater. Res., Part A, 2003, vol. 64, p. 164.
Escada, A.L.A., Rodrigues, D., and Machado, J.P.B., Surf. Coat. Technol., 2010, vol. 205, p. 383.
Müller, F.A., Müller, L., Caillard, D., and Conforto, E., J. Cryst. Growth, 2007, vol. 304, p. 464.
Sengil, I.A., Korozyon, I.T.Ü. Sakarya Mühendislik Fakültesi Matbaasi, 1992, vol. 1501, p. 494.
Sul, Y.T., Johansson, C.B., Petronis, S., et al., Biomaterials, 2002, vol. 23, p. 491.
Nagayama, M. and Kawamura, S., Electrochim. Acta, 1967, vol. 12, p. 1109.
Mhaede, M., Ahmed, A., Wollmann, M., and Wagner, L., Mater. Sci. Eng.: C, 2015, vol. 50, p. 24.
Barbucci, A., Delucchi, M., Panizza, M., et al., J. Alloys Compd., 2001, vols. 317–318, p. 607.
Lu, X., Zhao, Z., and Leng, Y., Mater. Sci. Eng.: C, 2007, vol. 27, p. 70.
Kokubo, T., Thermochim. Acta, 1996, vols. 280–281, p. 479.
Karanjai, M., Sundaresan, R., Mohan, T.R.R., and Kashyap, B.P., Mater. Sci. Eng.: C, 2008, vol. 28, p. 1401.
Amin, M.S., Randeniya, L.K., Bendavid, A., et al., Diamond Relat. Mater., 2012, vol. 21, p. 42.
Chi, M.H., Tsou, H.K., Chung, C.J., and He, J.L., Thin Solid Films, 2013, vol. 549, p. 98.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
Rights and permissions
About this article
Cite this article
Buyuksagis, A. Electrochemical corrosion of Ti6Al4V, Ti and AISI 316L SS after immersed in concentrated simulated body fluid. Prot Met Phys Chem Surf 52, 695–703 (2016). https://doi.org/10.1134/S2070205116040067
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2070205116040067