Abstract
This review analyzes the studies and developments of technologies based on the use of supercritical fluids for the micronization of polymer particles and the formation of efficient powder polymer coatings. Potential advantages of supercritical fluid technologies which combine different stages of formation of powder coatings in a unified flowsheet are considered. Possible further trends in scientific and engineering research are identified. A growth in the global market of powder coatings by 2020 is forecasted.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
S. D. Yeo and E. Kiran, J. Supercrit. Fluids 34, 287 (2005). doi 10.1016/j.supflu.2004.10.006
List and Codes of Pollutants in Atmospheric Air, 9th ed. (Atmosfera, St. Petersburg, 2010) [in Russian].
S. L. Turner, J. N. Baskir, and C. M. Nunez, Powder Coatings: a Technology Review. Pollution Prevention Review (Wiley, New York, 1999), p. 7.
A. M. Vorobei, K. B. Ustinovich, O. I. Pokrovskiy, O. O. Parenago, and V. V. Lunin, Russ. J. Phys. Chem. B 9, 1103 (2015).
Advanced Powder Coating Technology. Processing Steps in Powder Coating Manufacture. https://doi.org/www.ohio.edu/people/lees1/ltproc.html
US Patent No. 6849678 (2005).
D. Yu. Zalepugin, N. A. Til’kunova, I. V. Chernyshova, and V. S. Polyakov, Sverkhkrit. Fluidy Teor. Prakt. 1 (1), 2 (2006).
F. M. Gumerov, A. N. Sabirzyanov, and G. I. Gumerova, Sub-and Super Critical Fluids in Processes of Polymers Processing (AN RT Fen, Kazan) [in Russian].
D. L. Tomasko, H. Li, D. Liu, X. Han, M. J. Wingert, L. J. Lee, and K. W. Koelling, Ind. Eng. Chem. Res. 42, 6431 (2003). doi 10.1021/ie030199z
R. Parhi and P. Suresh, Adv. Pharm. Sci. Technol. 1, 13 (2013). doi 10.14302/issn.2328-0182.japst-12-145
E. Reverchon and G. Della Porta, Pure Appl. Chem. 73, 1293 (2001).
J. Jung and M. Perrut, J. Supercrit. Fluids 20, 179 (2001).
J.-J. Shim, M. Z. Yates, and K. P. Johnston, Ind. Eng. Chem. Res. 38, 3655 (1999). doi 10.1021/ie990039g
US Patent No. 6340722 (2002).
Y. Chernyak, F. Henon, R. B. Harris, R. D. Gould, R. K. Franklin, J. R. Edwards, J. M. DeSimone, G. Ruben, and R. G. Carbonell, Ind. Eng. Chem. Res. 40, 6118 (2001). doi 10.1021/ie010267m
R. K. Franklin, J. R. Edwards, Y. Chernyak, R. D. Gould, F. Henon, G. Ruben, and R. G. Carbonell, Ind. Eng. Chem. Res. 40, 6127 (2001). doi 10.1021/ie010268e
M. R. Bagherzadeh, T. Mousavinejad, E. Akbarinezhad, and M. Ahmadi, Prog. Org. Coat. 77, 1977 (2014). doi 10.1016/j.porgcoat.2014.07.017
T. Mousavinejad, M. R. Bagherzadeh, E. Akbarinezhad, and M. J.-F. Guinel, Prog. Org. Coat. 79, 90 (2015). doi 10.1016/j.porgcoat.2014.11.009
O. Ratcharak and A. Sane, J. Supercrit. Fluids 89, 106 (2014). doi 10.1016/j.supflu.2014.02.020
X. S. Liao, R. D. Yang, and F. Yang, in Proceedings of the 4th International Symposium on Emerging Technologies of Pulping and Papermaking, Guangdong, Research Progress in Paper Industry and Biorefinery, China, Nov. 8–10, 2010, Vols. 1–3, p. 2071.
R. D. Yang, Z. Cheng, G. W. Chen, and F. Yang, J. Appl. Polym. Sci. 132, 42439 (2015). doi 10.1002/app.42439
M. Türk, in Supercritical Fluid Science and Technology (Elsevier, Amsterdam, 2014), Vol. 6, p. 77.
M. Perrut, Supercritical Fluid Applications: Industrial Development and Economic Issues, Lecture (SEPAREX, 2011).
USA Patent No. 7537803 B2 (2009).
J. Wang and R. Pfeffer, AIChE J. 51, 440 (2005). doi 10.1002/aic.10323
V. Martin, R. Romero-Diez, S. Rodrigues-Rojo, and M. J. Cocero, Chem. Eng. J. 279, 425 (2015). doi 10.1016/j.cej.2015.05.014
N. Murillo-Cremaes, P. Subra-Paternault, J. Saurina, and A. Roig, Colloid Polym. Sci. 292, 2475 (2014). doi 10.1007/s00396-01403260-6
L. Battaglia, M. Gallarate, P. P. Panciani, E. Ugazio, S. Sapino, E. Peira, and D. Chirio, in Nanotechnology and Nanomaterials: Application of Nanotechnology in Drug Delivery, Ed. by Ali Demir Sezer (InTech, Rijeka, Croatia, 2014).
E. Lack, A. E. Weidner, B. Z. Knez, S. Gruner, B. Weinreich, and H. Seidlitz, in Proceedings of the 1st Vienna International Conference on Micro-and Nano-Technology, Vienna, Austria, March 9–11, 2005.
E. Weidner, R. Steiner, and Z. Knez, High Pressure Chemical Engineering (Elsevier, Amsterdam, 1996), p. 223.
J. Fages, H. Lochard, J.-J. Letourneau, M. Sauceau, and E. Rodier, Powder Technol. 141, 219 (2004). doi 10.1016/j.powtec.2004.02.007
Z. Knez, Chem. Ind. Chem. Eng. Quart. 12, 141 (2006).
D. C. Busby, C. W. Glancy, K. L. Hoy, C. Lee, and K. A. Nielsen, J. Oil Color Chem. Assoc. 74, 362 (1991).
J. L. Fulton, G. S. Deverman, C. R. Yonker, J. W. Grate, J. de Young, and J. B. McClain, Polymer 44, 3627 (2003). doi 10.1016/S0032-3861(03)00280-5
L. Ovaskainen, S. Chigome, N. A. Birkin, S. M. Howdle, N. Torto, L. Wagberg, and C. Turner, J. Supercrit. Fluids 95, 610 (2014). doi 10.1016/j.supflu.2014.09.014
J. L. Kendall, D. A. Canelas, J. L. Young, and J. M. DeSimone, Chem. Rev. 99, 543 (1999). doi 10.1021/cr9700336
Z. Knez and E. Weidner, Curr. Opin. Solid State Mater. Sci. 7, 353 (2003).
M. Petermann, in Proceedings of the 4th International Symposium on High Pressure Process Technology and Chemical Engineering, Venice, Italy, Sept. 22–25, 2002, Vol. 2, p. 723.
S. D. Yeo and E. Kiran, Macromolecules 37, 8239 (2004).
A. Yu. Kostin, A. A. Butakov, and E. N. Shatunova, in Proceedings of the 7th Conference with International Participation on Supercritical Fluides: Fundamental Principles, Technologies, Innovations, Zelenogradsk, Kaliningrad Region, Sept. 16–21, 2013, p. 34.
A. A. Butakov, A. Yu. Kostin, and E. N. Shatunova, Russ. J. Phys. Chem. B 5, 1155 (2011).
RF Patent No. 2385334 (2010).
RF Patent No. 2481362 (2013).
N. M. Galashina, Vysokomol. Soedin. 36, 640 (1994).
I. Bochon, S. Kereth, A. Kilzer, and M. Peterman, J. Supercrit. Fluids 96 (Spec. Iss.), 324 (2015). doi 10.1016/j.supflu.2014.09.042
K. Matsuyama and K. Mishima, J. Supercrit. Fluids 49, 256 (2009). doi 10.1016/j.supflu.2009.03.001
K. M. Do, H. Yuvaraj, M. H. Woo, H. G. Kim, E. D. Jeong, P. Keith, K. P. Johnston, and K. T. Lim, Colloid Polym. Sci. 286, 1343 (2008). doi 10.1007/s00396-008-1892-0
Powder Coatings Market by Resin Type (Epoxy, Epoxy-Polyester Hybrid, Polyester, Acrylic, Polyurethane and Others) and by End-User Industries (Architectural, Appliances, Automotive, General Industrial, Furniture and Others)–Global Forecast to 2019, Report Code: CH 2790 (2014). https://doi.org/www.marketsandmarkets.com/Market-Reports/powder-coatings-market-151375
Global Powder Coating Market, Market Report (Acmite Market Intelligence, 2011).
THAR Technologies Inc. https://doi.org/www.tharthech.com.
Supercritical Fluid Technologies Inc. https://doi.org/www.supercriticalfluids.com.
SEPAREX. https://doi.org/www.separex.fr.
LEWA. https://doi.org/www.lewa.com/en/applications/extraction-with-supercritical-fluids/.
NATEX Prozesstechnologie. https://doi.org/www.natex.at/contacts.html
Powder Coating Market Worth $12,055.13 Million by 2019. MarketsandMarkets Report: Powder Coatings Market by Resin Type and by End-User Industries–Global Forecast to 2019. https://doi.org/www.marketsandmarkets.com/PressReleases/powder-coatings.asp
The Powder Coatings Market Does not Develop at Full Strength. https://doi.org/yazpk.ru/ryinok-poroshkovyih-pokrytiyne-razvivaetsya-v-polnuyu-silu/.
Grand View Research, Inc.: Global Powder Coatings Market by Application (Automotive, Consumer Goods, General Industry, Architectural, Furniture) Expected to Reach USD 12.48 Billion by 2020. Market Research & Consulting. https://doi.org/www.grandviewresearch.com/.industry-analysis/poder-coating-market-analysis 12. https://doi.org/www.grandviewresearch.com/industry-analysis/poder-coating-market-analysis
Transparency Market Research Report. https://doi.org/www.transparencymarketresearch.com/superhydrophobiccoatings-market.html.
Hydrophobic Coating Market and Surfaces Forecast to 2023 in New Research Report. November 24, 2015. https://doi.org/www.reportsnreports.com/reports/435675-hydrophobic-coatings-and-surfaces-2016-2023.html.
Medical Coating Market by Type (Hydrophilic and Hydrophobic Coatings), Application (Medical Devices, Implants, Medical Equipment and Tools and Others) and Geography-Regional Trends and Forecast to 2019 (London, Feb. 25, 2015). https://doi.org/www.prnewawire.com/news-releases/medical.
Powder Coating Market Analysis by Application (Automobile, Consumer Goods, General Industry, Architectural, Furniture) and Segment Forecasts to 2020. Grand View Research (Market Res. Consult., Apr. 2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © I.A. Makaryan, A.Yu. Kostin, I.V. Sedov, 2017, published in Sverkhkriticheskie Flyuidy. Teoriya i Praktika, 2017, Vol. 12, No. 3, pp. 50–69.
Rights and permissions
About this article
Cite this article
Makaryan, I.A., Kostin, A.Y. & Sedov, I.V. Development of Functional Polymer Coatings Using Supercritical Fluids: Technologies, Markets, and Prospects. Russ. J. Phys. Chem. B 12, 1132–1143 (2018). https://doi.org/10.1134/S1990793118070084
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1990793118070084