Abstract
The substantiated dimensionless criterion of jamming characterizes relationship between the temperature of the contact links of spiroid gearing and the load-bearing capacity of an oil film. Based on the review of the existing tribotechnical systems used in scoring resistance testing, a physical model of spiroid gearing is selected. The test data obtained on a rolling-and-disc scheme of a friction assembly are presented. The relations between the friction coefficient in the spiroid gearing and the unit load are determined for the steel–steel material couples in a range of slip velocities and temperatures. A design procedure for spiroid gearing with respect to jamming is proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Change history
20 July 2018
Due to a technical error volume 53, issue 4, 2017 has been published online with an incorrect cover data. The issue has erroneously been distributed with the cover date July 2018. The correct caver date for volume 53, issue 4 should be July 2017.
References
Gold’farb, V.I. and Anferov, V.H., Prospects for Spiroid Reducing Gears in Mining Machine Engineering, Fundamental Problems of Geo-Environment Formation under Industrial Impact: Int. Conf. Proc., vol. 2, Novosibirsk: IGD SO RAN, 2007.
Kovalenko, R.K., Selection of Clutch Sticking Criteria for Spiroid Gears, J. Fundament. Appl. Min. Sci., 2016, vol. 3, no. 2, pp. 92–97.
Golego, N.L., Skhvatyvanie v mashinakh i metory ego ustranenia (Jamming and Its Elimination in Machines), Kiev: Tekhnika, 1965.
Genkin, M.D., Kuz’min, N.F., and Misharin, Yu.A., Voprosy zaedaniya zubchatykh koles (Issues of Jamming in Gear Wheels), Moscow: AN SSSR, 1959.
Venikov, V.A., Teoriya podobiya i modelirovaniya (primentil’no k zadacham elektrotekhniki): ucheb. posob. dkya vuzov (Theory of Similarity and Modeling (As Applied to Electrotechnics): Higher Education Study Guide), Moscow: Vyssh. Shkola, 1976.
Evdokimov, Yu.A., Gudima, V.V., and Shcherbakov, Osnovy teorii inzhenernogo eksperimenta. Ch. 2. Teoriya fizicheskogo podobiya i modelirovaniya slozhnykh ob’ektov i protsessov: ucheb. posobie (Fundamentals of Engineering Experiment Theory. Part 2: Theory of Physical Similarity and Modeling of Complex Objects and Processes: Educational Aid), Rostov: RGUPS, 1997.
Chichinadze, A.V., Braun, E.D., Bushe, N.A., et al., Osnovy tribologii (trenie, iznos, smazka): ucheb. dlya tekhnich. vuzov (Basic Tribology (Friction, Wear, Lubrication): Textbook for Technological Universities), Moscow: Mashinostroenie, 2001.
Block, H., Theoretical Study of Temperature Raise at Surfaces of Actual Contact under Oiliness Lubricating Conditions, Proc. Inst. of Mech. Eng., 1937, vol. 2, pp. 222–235.
Korovchinsky, M.V., Principles of the Thermal Contact Theory in Local Friction, Novoe v teorii treniya (New Development in the Theory of Friction), Moscow: Nauka, 1966, pp. 98–145.
Shul’ts, V.V., Friction Ring Surface Temperature, Reliability and Endurance of Machines: LISI Proceedings, Leningrad, 1973, issue 79, pp. 50–58.
Petrusevich, A.I., Danilov, V.D., and Fomichev, V.T., Analysis of Influence of Rubbing Velocity on Oil Film Thickness at Interface of Cylinder Rollers, Issledovaniya po tribotekhnike: trudy spetsialistov SSSR i GDR (Triboengineering Research: Papers of Experts from USSR and German Democratic Republic), A.V. Chichinadze (Ed.), Moscow: NII Inform. Mashinost., 1975, pp. 158–164.
Anferov, V.N. and Kovalenko, R.K., Selecting a Physical Model to Study Jamming in Spiroid Gear Toothing, Vestn. MADI, 2016, no. 4(47), pp. 33–39.
Anferov, V.N. and Koval’kov, A.A., Test Data for the Efficiency of the Spiroid Spur Gearing, J. Min. Sci., 2006, vol. 42, no. 6, pp. 617–621.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © B.B. Danilov, B.N. Smolyanitsky, A.I. Chanyshev, D.O. Cheshchin, 2017, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2017, No. 4, pp. 69–79.
Rights and permissions
About this article
Cite this article
Anferov, V.N., Kovalenko, R.K. Load-Bearing Capacity of Spiroid Gears of Mining Machine Drives under Peak Loads. J Min Sci 53, 686–693 (2018). https://doi.org/10.1134/S1062739117042679
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739117042679