Abstract
A method for estimating the strength properties of a porous ceramic coating was proposed. The method is based on the analysis of preliminary test results on indentation of coatings with defects of varying size and depth of occurrence. The strength properties of the coating were studied by computer simulation combining the discrete description (the movable cellular automata method) and continuous description (the finite difference method). Relationships were found between the parameters of a pore such as its length and depth of occurrence in the coating and the critical stress corresponding to fracture of the coating. The proposed method can be used to study the strength properties of material surface layers and to predict the critical stress in a contact region.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A.S. Vereschaka and I.P. Tretyakov, Cutting Tools with Wear-Resistant Coatings, Mashinostroenie, Moscow, 1986 (in Russian).
A.D. Pogrebnyak and Yu.N. Tyurin, Modification of material properties and coating deposition using plasma jets, Physics-Uspekhi, 48, No. 5 (2005) 487.
V.P. Tabakov, Serviceability of Cutting Tools with Wear-Resistant Coatings on the Basis of Composite Nitrides and Titanium Carbonitrides, U1STU, Ulyanovsk, 1998 (in Russian).
K. Pantleon, O. Kessler, F. Hoffann, and P. Mayr, Induction surface hardening of hard coated steels, Surf. Coat. Tech., 120–121 (1999) 495.
E.A. Almond, Aspects of various processes for coating and surface hardening, Vacuum, 34, Iss. 10–11 (1984) 835.
I.N. Ermolov, N.P. Aleshin, and A.I. Potapov, Nondestructive Testing: Vol. 2. Acoustic Control Techniques, Ed. by V.V. Sukhorukov, Vyssh. Shkola, Moscow, 1991 (in Russian).
V.V. Klyuev, Handbook on Nondestructive Testing and Engineering Diagnostics, Mashinostroenie, Moscow, 2005 (in Russian).
S.G. Psakhie, V.L. Popov, E.V. Shilko, A.Yu. Smolin, and A.I. Dmitriev, Spectral analysis of the behavior and properties of solid surface layers. Nanotribospectroscopy, Phys. Mesomech., 12, No. 5–6 (2009) 221.
S.G. Psakhie, A.Yu. Smolin, Yu.P. Stefanov, P.V. Makarov, E.V. Shilko, M.A. Chertov, and E.P. Evtushenko, Simulation of behavior of complex media on the basis of a discrete-continuous approach, Phys. Mesomech., 6, No. 5–6 (2003) 47.
A.Yu. Smolin, Yu.P. Stefanov, and S.G. Psakhie, Combined use of a discrete and continuous methods for the simulation of deformation and fracture in the contact region, Phys. Mesomech., 7, Spec. Iss., Part 1 (2004) 70 (in Russian).
S.G. Psakhie, A.Yu. Smolin, Yu.P. Stefanov, and Ig.S. Konovalenko, Computer simulation of friction with a combined discrete-continuous approach, Phys. Mesomech., 8, Spec. Iss. (2005) 9 (in Russian).
S.G. Psakhie, S.Yu. Korostelev, A.Yu. Smolin, A.I. Dmitriev, E.V. Shilko, D.D. Moiseyenko, E.M. Tatarintsev, and S.V. Alexeev, Movable cellular automata method as a tool for physical mesomechanics of materials, Phys. Mesomech., 1, No. 1 (1998) 89.
S.G. Psakhie, G.P. Ostermeyer, A.I. Dmitriev, E.V. Shilko, A.Yu. Smolin, and S.Yu. Korostelev, Method of movable cellular automata as a new trend of discrete computational mechanics. I. Theoretical description, Phys. Mesomech., 3, No. 2 (2000) 5.
Yu.P. Stefanov, On some features of numerical simulation of the behavior of elastic-brittle-plastic materials, Phys. Mesomech., 8, No. 3–4 (2005) 121.
A.G. Kolmakov, VF. Terentyev, and M.B. Bakirov, Hardness Measurement Techniques, Metallurgia, Moscow, 1987 (in Russian).
L. Riester, T.J. Bell, and A.C. Fischer-Cripps, Analysis of depth-sensing indentation tests with a Knoop indenter, J. Mater. Res., 16, No. 6 (2001) 1660.
M.A. Medkov, P.A. Storozhenko, A.M. Tsirlin, N.I. Steblevskaya, E.S. Panin, D.N. Grishchenko, and G.S. Kubakhova, Zr02 coatings on SiC fibers, Inorg. Mat., 43, No. 2 (2007) 162.
S.N. Kulkov and S.P. Buyakova, Phase composition and formation of a structure on the basis of stabilized zirconium dioxide, Ross. Nanotekhnologii, 2, Nos. 1–2 (2007) 119 (in Russian).
Ig.S. Konovalenko, A.Yu. Smolin, and S.G. Psakhie, Multilevel simulation of deformation and fracture of brittle porous materials in the method of movable cellular automata, Phys. Mesomech., 13, No. 1–2 (2010) 47.
Global Roadmap for Ceramics: Proc. of 2nd Int. Congress on Ceramics (ICC2), Institute of Science and Technology for Ceramics, National Research Council, Verona (Italy), June 29–July 4, 2008, Ed. by A. Belosi and G.N. Babini, Verona, 2008.
A.V. Aleksandrov, V.D. Potapov, and B.P. Derzhavin, Theory of Elasticity and Plasticity, Vyssh. Shkola, Moscow, 1990 (in Russian).
Yu.N. Rabotnov, Solid Mechanics, Nauka, Moscow, 1988 (in Russian).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © Ig.S. Konovalenko, A.I. Dmitriev, A.Yu. Smolin, S.G. Psakhie, 2011, published in Fiz. Mezomekh., 2011, Vol. 14, No. 2, pp. 39–45.
Rights and permissions
About this article
Cite this article
Konovalenko, I.S., Dmitriev, A.I., Smolin, A.Y. et al. On the estimation of strength properties of porous ceramic coatings. Phys Mesomech 15, 88–93 (2012). https://doi.org/10.1134/S1029959912010092
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1029959912010092