Abstract
Effect of structure and texture on the anisotropy of the mechanical properties of the MA2-1pch magnesium alloy subjected to equal-channel angular pressing and subsequent annealing has been studied in two mutually perpendicular planes Y and X (along and across the pressing direction). The anisotropy of the mechanical properties is shown to be due to various orientations of shear bands and various types of texture inside the bands and outside them in planes X and Y.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. M. Segal, V. I. Reznikov, V. I. Kopylov, D. A. Pavlik, and V. M. Malyshev, Processes of Plastic Structure Formation of Metals (Nauka i Tekhnika, Minsk, 1994).
R. Z. Valiev and I. V. Aleksandrov, Nanostructured Materials Produced by Severe Plastic Deformation (Logos, Moscow, 2000).
V. M. Segal, “Equal channel angular extrusion: from macromechanics to structure formation,” Mater. Sci. Eng. A 271, 322–333 (1999).
R. B. Figueiredo, M. T. R. Aguilar, and P. R. Cetlin, “Finite element modeling of plastic instability during ECAP processing of flow-softening materials,” Mater. Sci. Eng. A 430, 179–184 (2006).
D. C. Foley, M. Al-Maharbi, K. T. Hartwig, I. Karaman, L. J. Kecskes, and S. N. Mathaudhu, “Grain refinement vs. crystallographic texture: mechanical anisotropy in a magnesium alloy,” Scripta Materialia 64, 193–196 (2011).
M. Al-Maharbi, I. Karaman, I. J. Beyerlein, D. Foley, K. T. Hartwig, L. J. Kecskes, and S. N. Mathaudhu, “Microstructure, crystallographic texture, and plastic anisotropy evolution in an Mg alloy during equal channel angular extrusion processing,” Mater. Sci. Eng. A 528, 7616–7627 (2011).
V. N. Serebryany, G. S. D’yakonov, M. A. Khar’kova, V. I. Kopylov, and S. V. Dobatkin, “Study of the texture and the structure of the MA2-1pch magnesium alloy after ECAP and annealing by a quantitative X-ray diffraction texture analysis and backscattered electron diffraction,” Zavod. Lab. 82 (3), 36–41 (2016).
F. Kang, J. T. Wang, and Y. Peng, “Deformation and fracture during equal channelangular pressing of AZ31 magnesium alloy,” Mater. Sci. Eng. A 487, 68–73 (2008).
V. N. Serebryany, S. F. Kurtasov, and M. A. Litvinovich, “Study of the ODF errors during reversal of pole figures using the statistical method of ridge estimations,” Zavod. Lab. 73 (4), 29–35 (2007).
S. F. Kurtasov, “The technique of the quantitative analysis of the rolling textures of materials with the cubic symmetry of the crystal lattice,” Zavod. Lab. 73 (7), 41–44 (2007).
V. N. Serebryany, S. V. Dobatkin, and V. I. Kopylov, “Effect of the texture and the microstructure of the MA2-1 alloy after equal channel angular pressing,” Tekhn. Legkikh Splavov, No. 3, 28–35 (2009).
V. N. Serebryany, G. S. D’yakonov, V. I. Kopylov, G. A. Salishchev, and S. V. Dobatkin, “Texture and structure contribution to low-temperature plasticity enhancement of Mg–Al–Zn–Mn alloy MA2-1pch 114 (5), 448–456 (2013).
D. R. Thornburg and H. R. Piehler, “An analysis of constrained deformation by slip and twinning in hexagonal close packed metals and alloys,” Metall. Trans. A 6, 1511–1523 (1975).
H. J. Bunge, “Technological applications of texture analysis,” Z. Metallkde 76, 457–470 (1985).
V. N. Serebryany and N. N. Pozdnyakova, “Evaluation of the normal anisotropy coefficient in AZ31 alloy sheets,” Russ. Metall. (Metally), No. 1, 58–64 (2009).
M. H. Yoo, “Slip, twinning, and fracture in hexagonal close-packed metals,” Metall. Trans. A 12, 409–418 (1981).
D. J. Bacon and V. Vitek, “Atomic-scale modeling of dislocations and related properties in the hexagonal close-packed metals,” Metall. Mater. Trans. A 33, 721–733 (2002).
V. N. Serebryany, T. M. Ivanova, V. I. Kopylov, S. V. Dobatkin, N. N. Pozdnyakova, V. A. Pimenov, and T. I. Savelova, “Effect of equal channel angular pressing and annealing conditions on the texture, microstructure and deformability of the MA2-1 alloy,” Russ. Metall. (Metally), No. 4, 648–657 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.N. Serebryany, M.A. Khar’kova, G.S. D’yakonov, V.I. Kopylov, S.V. Dobatkin, 2017, published in Deformatsiya i Razrushenie Materialov, 2017, No. 2, pp. 25–33.
Rights and permissions
About this article
Cite this article
Serebryany, V.N., Khar’kova, M.A., D’yakonov, G.S. et al. Shear bands and anisotropy of the mechanical properties of an MA2-1pch magnesium alloy after equal-channel angular pressing. Russ. Metall. 2017, 842–850 (2017). https://doi.org/10.1134/S0036029517100214
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029517100214