Abstract
The structure and the mechanical properties of high-nitrogen austenitic 05Kh21G9N7AMF (0.56% N) and 04Kh22G12N4AMF (0.49% N) steels have been studied after hot rolling. It is found that the temperatures of the onset and end of hot deformation influence the structure and the mechanical properties of these steels. The higher set of mechanical properties of steel 05Kh21G9N7AMF after rolling in the temperature range 1100–900°C is due to the formation of a lamellar and equiaxed fragmented structure.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
O. A. Bannykh, V. M. Blinov, M. V. Kostina, E. V. Blinov, and G. Yu. Kalinin, “Effect of hot-rolling and heattreatment conditions on the structure and mechanical and technological properties of nitrogen-bearing austenitic steel 05Kh22AG15N8M2F-Sh,” Russian Metallurgy (Metally), No. 4, 306–313 (2006).
Yuji Ikegami and Rikio Nemoto, “Effect of thermomechanical treatment on mechanical properties of high-nitrogen containing Cr–Mn–Ni austenitic stainless steels,” ISIJ International 36 (7), 855–861 (1996).
V. M. Blinov, I. L. Poimenov, and O. I. Kulikova, “Effect of hot plastic deformation on the structure and mechanical properties of high-nitrogen austenitic steels,” in Structure and Physicomechanical Properties of Nonmagnetic Steels (Nauka, Moscow, 1986), pp. 30–33.
Michitaka Fujita, “Strength increment by warm-working on high magnetic steel,” Sumitomo Searen, No. 34, 21–25 (1987).
G. Yu. Kalinin, S. Yu. Mushnikova, O. V. Fomina, A. S. Teplenieva, O. G. Zotov, and S. F. Sokolov, “Physical simulation of processes of thermodeformation treatment of high-strength nitrogen-bearing austenitic steel and the study of their influence on the microstructure and properties,” Voprosy Metalloved., No. 1, 45–49 (2006).
G. Yu. Kalinin, S. Yu. Mushnikova, E. V. Nesterova, O. V. Fomina, and A. A. Khar’kov, “Study of the structure and properties of high-strength corrosion-resistant nitrogen steel 04Kh20N6G11M2AFB,” Voprosy Metalloved., No. 1, 49–55 (2006).
V. M. Blinov, I. O. Bannykh, E. V. Blinov, T. N. Zvereva, S. Ya. Betsofen, and L. G. Rigina, “High-strength nonmagnetic corrosion-resistant steel,” RF Patent 2367710, Bull. Izobret., No. 26 (2009).
V. F. Terent’ev, E. V. Blinov, S. Yu. Mushnikova, D. V. Prosvirin, O. A. Khar’kov, O. V. Fomina, and V. M. Blinov, “Mechanical properties of austenitic corrosion-resistant steel with high nitrogen content,” Deformatsiya i Razrushenie Mater., No. 5, 12–18 (2011).
Yu. I. Ustinovshchikov and V. M. Blinov, “Structural and phase transformations in high-nitrogen austenitic steel 05Kh20AG10N3MF during thermal action,” Russian Metallurgy (Metally), No. 1, 58–64 (2012).
V. M. Blinov, I. O. Bannykh, and T. N. Zvereva, “Highplasticity heat-resistant 03Kh14G16N6Yu-type steels with heat-and deformation-resistant austenite,” Russian Metallurgy (Metally), No. 4, 350–357 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © V.M. Blinov, N.M. Voznesenskaya, I.O. Bannykh, O.A. Tonasheva, E.V. Blinov, T.N. Zvereva, 2015, published in Deformatsiya i Razrushenie Materialov, 2015, No. 2, pp. 26–30.
Rights and permissions
About this article
Cite this article
Blinov, V.M., Voznesenskaya, N.M., Bannykh, I.O. et al. Effect of the rolling temperature on the structure and the mechanical properties of high-nitrogen austenitic steels 05Kh21G9N7AMF and 04Kh22G12N4AMF. Russ. Metall. 2016, 389–393 (2016). https://doi.org/10.1134/S0036029516040054
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029516040054