Abstract
The measurement of mechanical properties of biological tissues is subject to artifacts such as natural variability and inconsistency in specimen preparation. As a result, data cannot be easily compared across laboratories. To test the effects of variable specimen dimensions, we systematically modified the size and aspect ratio (AR) of porcine aortic valve tissues and measured their stiffness and extensibility. We found that: (i) as the AR of circumferential specimens increased from 1:1 to 5:1, their stiffness increased by 36% (p < 0.001) and their extensibility decreased by 21% (p < 0.001); (ii) as the AR of radial specimens increased from 0.8:1 to 4:1, their stiffness increased by 36% (p < 0.001) and their extensibility decreased by 34% (p < 0.001); (iii) as the size of circumferential specimens was reduced from 128 to 32 mm2 at fixed AR (2:1), their stiffness decreased by 6% (p=0.05), and their extensibility increased by 17% (p < 0.001); and (iv) as the size of radial specimens was reduced from 72 to 32 mm2 at fixed AR (2:1), their stiffness decreased by 7% (p=0.03) and their extensibility increased by 16% (p=0.005). Thus, as specimens of constant length became narrower, they became stiffer and less extensible, and as specimens of fixed aspect ratio became smaller, they became less stiff and more extensible. Statistical models of these trends were predictive and can thus be used to integrate materials test data across different laboratories. © 2003 Biomedical Engineering Society.
PAC2003: 8719Rr, 8715La, 8710+e
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Atkinson, T. S., B. J. Ewers, and R. C. Haut. The tensile and stress relaxation responses of human patellar tendon varies with specimen cross-sectional area. J. Biomech.32:907–914, 1999.
Carew, E. O., J. E. Barber, and I. Vesely. Role of preconditioning and recovery time in repeated testing of aortic valve tissues: Validation through quasilinear viscoelastic theory. Ann. Biomed. Eng.28:1093–1100, 2000.
Carew, E. O., and I. Vesely. A new method of estimating gauge length for porcine aortic valve test specimens. (in press).
Clark, R. E., and E. H. Finke. Scanning and light microscopy of human aortic leaflets in stressed and relaxed states. J. Thorac. Cardiovasc. Surg.67:792–804, 1974.
David, H., D. R. Boughner, I. Vesely, and G. Gerosa. The pulmonary valve: Is it mechanically suitable for use as an aortic valve replacement?ASAIO J.40:206–212, 1994.
Diggle, D. J., K. Y. Liang, and S. L. Zegler. Analysis of Longitudinal Data. Oxford, NY: Oxford Science, 1994.
Haut, R. C., and R. W. Little. A constitutive equation for collagen fibers. J. Biomech.5:423–430, 1972.
Lee, J. M., D. W. Courtman, and D. R. Boughner. The glutaraldehyde-stabilized porcine aortic valve xenograft. I. Tensile viscoelastic properties of the fresh leaflet material. J. Biomed. Mater. Res.18:61–77, 1984.
Lee, J. M., S. A. Haberer, C. A. Pereira, W. A. Naimark, D. W. Courtman, and G. J. Wilson. High strain rate testing and structural analysis of pericardial bioprosthetic materials. In: Biomaterials' Mechanical Properties ASTM STP 1173, edited by H. E. Kambic and A. T. Yakabori, Philadelphia: ASTM, 1994, pp. 19–42.
Leeson-Dietrich, J., D. R. Boughner, and I. Vesely. Porcine pulmonary and aortic valves: A comparison of their tensile viscoelastic properties at physiological strain rates. J. Heart Valve Dis.4:88–94, 1995.
Rousseau, E. P., A. A. Sauren, M. C. van Hout, and A. A. van Steenhoven. Elastic and viscoelastic material behaviour of fresh and glutaraldehyde-treated porcine aortic valve tissue. J. Biomech.16:339–348, 1983.
Sauren, A. A., W. Kuijpers, A. A. van Steenhoven, and F. E. Veldpaus. Aortic valve histology and its relation with mechanics-preliminary report. J. Biomech.13:97–104, 1980.
Schoen, F. J.Aortic valve structure-function correlations: Role of elastic fibers no longer a stretch of the imagination. J. Heart Valve Dis.6:1–6, 1997.
Schoen, F. J.Future directions in tissue heart valves: Impact of recent insights from biology and pathology. J. Heart Valve Dis.8:350–358, 1999.
Tan, A. J., and D. L. Holt. The effects of sterilization and storage treatments on the stress–strain behavior of aortic valve leaflets. Ann. Thorac. Surg.22:188–194, 1976.
van Noort, R., S. P. Yates, T. R. Martin, A. T. Barker, and M. M. Black. A study of the effects of glutaraldehyde and formaldehyde on the mechanical behavior of bovine pericardium. Biomaterials3:21–26, 1982.
Vesely, I. A mechanism for the decrease in stiffness of heart valve tissues after crosskicking. ASAIO J.42:993–999, 1996.
Vesely, I.The hybrid autograft/xenograft bioprosthetic heart valve. J. Heart Valve Dis.6:292–295, 1997.
Vesely, I.The role of elastin in aortic valve mechanics. J. Biomech.31:115–123, 1998.
Vesely, I., A. Lozon, and E. Talman. Is zero-pressure fixation of bioprosthetic valves truly stress free?J. Thorac. Cardiovasc. Surg.106:288–298, 1993.
Vesely, I., and R. Noseworthy. Micromechanics of the fibrosa and the ventricularis in aortic valve leaflets. J. Biomech.25:101–113, 1992.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Carew, E.O., Patel, J., Garg, A. et al. Effect of Specimen Size and Aspect Ratio on the Tensile Properties of Porcine Aortic Valve Tissues. Annals of Biomedical Engineering 31, 526–535 (2003). https://doi.org/10.1114/1.1568116
Issue Date:
DOI: https://doi.org/10.1114/1.1568116