Article PDF
Avoid common mistakes on your manuscript.
References
Brezinski, J.P., “The Creep Properties of Paper,” Tappi 39(2): 116 (1956).
Schulz, J.H., “The Effect of Straining During Drying on the Mechanical and Viscoelastic Behavior of Paper,” Tappi 44(10): 736 (1961).
Saborn, I.B., “A Study of Irreversible, Stress-induced Changes in the Macrostructure of Paper,” Tappi 45(6): 465 (1962).
Byrd, V.L., “An Investigation of Handsheet Structural and Property Changes During and After Creep under Constant and Cyclic Relative Humidity Environments,” Thesis, North Carolina State Univ. (1971).
Gunderson, D.E., “A Method for Compressive Creep Testing of Paperboard,” Tappi 64(11): 67 (1981).
Considine, J.M. and Gunderson, D. E., “A Method for Mechanical Property Testing of Paperboard During Compressive Creep in a Cyclic Humidity Environment,” EXPERIMENTAL TECHNIQUES 11(9): 18 (1987).
Furukawa, I., Mark, R.E., Crosby, C.M., and Perkins, R.W., Jr., “Inelastic Behavior of Machine-made Paper Related to Its Structural Changes,” Japan Tappi J. 45(5): 582 (1991).
Haraldsson, T., Fellers, C., and Kolseth, P., “A Method for Measuring the Creep and Stress-strain Properties of Paperboard in Compression,” J. Pulp Paper Sci. 20(1): J14 (1994).
Considine, J.M., Stocker, D.L., Laufenberg, T.L., and Evans, J. W., “Compressive Creep Behavior of Corrugating Components Affected by Humid Environment,” Tappi J. 77(1): 87 (1994).
Jackson, T., Parker, I., and Chiu, W., “Ring Crush Creep,” Appita J. 53(5): 444 (2000).
Seth, R.S. and Soszynski, R.M., “An Evaluation of Methods for Measuring the Intrinsic Edgewise Compressive Strength of Paper,” Tappi 62(10):125 (1979).
HAL805 Data Sheet, Micronas GmbH, Germany (1999).
ISO Test Method 15359, “Paper and Board—Determination of the Static and Kinetic Coefficients of Friction—Horizontal Plane Method,” (1999).
Larsen-Basse, J., “Solid Friction,” in ASM Handbook: Vol. 18, Friction, Lubrication and Wear Technology, series ed. S.D. Henry and volume ed. P.J. Blau (Materials Park, OH: ASM International, 1990), 73.
Garoff, N., Jernberg, S., Nilvebrant, N., Fellers, C., and Backstrom, M., “Influence of Wood Extractives on Paper-to-Paper Friction,” Nordic Pulp Paper Res. J. 14(4): 320 (1999).
Whitsitt, J.W., Sprague, C.H., and Kloth, G.R., “Fundamentals of the Cold Corrugating Process: Forming,” TAPPI 1982 Ann. Mtg. Proc., p. 419 (1982).
Habeger, C.C., and Coffin, D.W., “The Role of Stress Concentrations in Accelerated Creep and Sorption-Induced Physical Aging,” J. Pulp Paper Sci. 26(4): 145 (2000).
TAPPI Test Method T-200 sp-01, “Laboratory Beating of Pulp—Valley Beater Method,” TAPPI Press, Atlanta, ISBN 1-930657-93-5 (2002).
Sauret, G., Trinh, H.J., and Lefebvre, G., “Versuche zur Herstellung mehrlagiger Industriekartons im Laboratorium,” Das Papier 23(1): 8 (1969).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Vorakunpinij, A., Coffin, D.W. & Haberger, C.C. A new device for measuring tensile and compressive creep in paper. Exp Tech 28, 43–48 (2004). https://doi.org/10.1111/j.1747-1567.2004.tb00163.x
Published:
Issue Date:
DOI: https://doi.org/10.1111/j.1747-1567.2004.tb00163.x