Abstract
A technology of environment-friendly refractories based on briquetted dry-ground dolomite, magnesia-silicate raw materials, and stabilizing additives has been developed. The potential use of the newly designed refractories as an alternative to chromite-periclase refractories is emphasized.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
REFERENCES
G. I. Antonov, “The raw materials source in Ukraine for production of magnesia refractories,” in: Development, Production and Application of High-Performance Refractories. Coll. of Res. Papers [in Russian], UGNIIO, Kharkov (1994), pp. 9–18.
G. V. Kukolev and I. E. Dudavskii, “Sintering of high-refractory materials, Part 1. Activated sintering of high-refractory materials containing calcium silicates and magnesia,” in: Coll. of Res. Papers, Issue 45 [in Russian], UkrNIIO, Kharkov (1939), pp. 3–37.
G. V. Kukolev and I. E. Dudavskii, “Sintering of high-refractory materials, Part 2. Low-temperature sintering of dolomite mixtures activated by magnesium silicates,” in: Coll. of Res. Papers, Issue 46 [in Russian], UkrNIIO, Kharkov (1940), pp. 117–129.
G. V. Kukolev, I. E. Dudavskii, and A. V. Amarinov, “Sintering of high-refractory materials. Part 3. Development of pilot-scale technologies for the low-temperature sintering of dolomite refractories activated by magnesium silicates,” in: Col. of Res. Papers, Issue 46 [in Russian], UkrNIIO, Kharkov (1940), pp. 129–138.
Z. Tokarskii and K. El'sner, “Production of a stabilized dolomite clinker and its industrial applications in the People's Republic of Poland,” Ogneupory, No. 2, 79–90 (1957).
I. S. Kainarskii and É. V. Degtyareva, Basic Refractories [in Russian], Metallurgizdat, Moscow (1974).
G. I. Antonov, V. P. Nedosvitii, O. M. Semenenko, et al., “Laboratory studies into the technology of stabilized dolomite products,” Ogneup. Tekh. Keram., No. 4, 24–26 (1997).
V. P. Nedosvitii, G. I. Antonov, and A. S. Kulik, “Talc magnesites for preparation of stabilized dolomite refractories,” in: Development, Production and Application of High-Performance Refractories. Coll. of Res. Papers [in Russian], UGNIIO, Kharkov (1994), pp. 19–26.
Yu. D. Gerashchuk, N. V. Il'chenko, L. K. Poltavets, et al., “A pilot batch of stabilized dolomite-periclase refractories,” Ogneup. Tekh. Keram., No. 4, 30–34 (1996).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Antonov, G.I., Nedosvitii, V.P., Kulik, A.S. et al. Stabilized Dolomite Refractories. Refractories and Industrial Ceramics 45, 160–164 (2004). https://doi.org/10.1023/B:REFR.0000036722.20179.39
Issue Date:
DOI: https://doi.org/10.1023/B:REFR.0000036722.20179.39