Abstract
A novel biodegradable material was prepared by compounding, in different proportions, pine wood flour (WF) and a commercial starch-cellulose acetate blend on a configurable co-rotating twin screw extruder. After pelletizing, the compounds were injection moulded and the mechanical and rheological properties of the mouldings determined. As the content of wood flour increases up to 50% (wt/wt), the tensile strength and the modulus improve significantly, whereas the toughness drops gradually. The effect of the wood flour content on the shear viscosity is complex, being impossible to establish a linear relationship between the two. The shear viscosity decreases with shear rate, but for a level of 40% and 50% of WF there is evidence of a quasi-Newtonian behaviour, irrespective of the test temperature. Compounds with 50% WF present the highest tensile strength and modulus but are difficult to process. However, the processability can be improved by using glycerol as plasticizer, without paying a too severe penalty in mechanical properties. In fact, by adding 15% glycerol (wt/wt), compounds with 50% WF can be successfully injection moulded into specimens with good mechanical properties.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
J. Brandt, K. Drechsler and H. Richter, in Proceedings of the 9th International Conference on Composite Materials (ICCM-9), Madrid, July 1993, p. 143.
W. Malcolm and E. Todd, in Proceedings of the 38th International SAMPE Symposium, Anaheim, April 1993, p. 2055.
R. Gauthier, C. Joly, A. C. Coupas, H. Gauthier and M. Escoubes, Polymer Composites 19 (1998) 287.
T.-J. Kim, Y.-M. Lee and S.-S. Im, ibid. 18 (1997) 273.
B.-D. Park and J. J. Balatinecz, ibid. 18 (1997) 425.
Idem., ibid. 18 (1997) 79.
D. Vink, European Plastics News 25 (1998) 59.
A. S. Herrmann, J. Nickel and U. Riedel, Polym. Deg.Stab. 59 (1998) 251.
S. Luo and A. N. Netravali, Polymer Composites 20 (1999) 367.
Idem., J.Mater.Sci. 34 (1999) 3709.
C. Bastioli, Polym.Deg.Stab. 59 (1998) 263.
Z. Q. Liu, A. M. Cunha, C. A. Bernardo and X.-S. Yi, in Proceedings of Sixteenth Annual Meeting of the Polymer Processing Society (PPS-16), Shanghai, June 2000, p. 509.
A. GrÖbe, “Polymer Handbook” (John Wiley & Sons Inc., New York, 1989) p. V/117.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cunha, A.M., Liu, Z.Q., Feng, Y. et al. Preparation, processing and characterization of biodegradable wood flour/starch-cellulose acetate compounds. Journal of Materials Science 36, 4903–4909 (2001). https://doi.org/10.1023/A:1011836220064
Issue Date:
DOI: https://doi.org/10.1023/A:1011836220064