Article PDF
Avoid common mistakes on your manuscript.
REFERENCES
Ya. D. Kogan and G. A. Solodkin, “Thermodynamic foundations of controlled nitriding processes,” Metalloved. Term. Obrab. Met., No. 4, 16–20 (1981).
Yu. M. Lakhtin and A. A. Bulgach, The Theory of Chemicothermal Treatment of Steel [in Russian], Mashinostroenie, Moscow (1982).
Yu. M. Lakhtin, Ya. D. Kogan, G.-J. Spies, and Z. Bemer, The Theory and Technology of Nitriding [in Russian], Metallurgiya, Moscow (1991).
Yu. M. Lakhtin, “Control of the phase composition and nitrogen content in the nitride layer in nitriding of steel 38Kh2MYuA,” Metalloved. Term. Obrab. Met., No. 1, 6–11 (1996).
Yu. M. Lakhtin, Physical Foundations of the Nitriding Process [in Russian], Mashgiz, Moscow (1948).
Yu. M. Lakhtin and Ya. D. Kogan, Gas Nitriding of Machine Parts and Tools [in Russian], Mashinostroenie, Moscow (1982).
Yu. M. Lakhtin, Ya. D. Kogan, and V. A. Aleksandrov, “New systems for controlling the nitriding process,” Metalloved. Term. Obrab. Met., No. 4, 47–51 (1978).
Yu. M. Lakhtin, “Prospects of development of the nitriding process,” Metalloved. Term. Obrab. Met., No. 7, 39–45 (1980).
Yu.M. Lakhtin, Ya. D. Kogan, A. M. Vas'kovskii, and A. A. Bulgach, “Principles of mathematical modeling of CTT processes,” Metalloved. Term. Obrab. Met., No. 8, 43–51 (1979).
Ya. D. Kogan and A. A. Bulgach, “Computer simulation of the kinetics of diffusion saturation in gas nitriding,” Metalloved. Term. Obrab. Met., No. 1, 10–19 (1984).
A. A. Bulgach, G. A. Solodkin, and L. A. Gliberman, “Computer simulation of the growth kinetics of nitrides in the nitriding layer,” Metalloved. Term. Obrab. Met., No. 1, 30–35 (1984).
Yu.M. Lakhtin, Ya. D. Kogan, and A. A. Bulgach, “Prospects of computer simulation in heat and chemicothermal treatment, “Metalloved. Term. Obrab. Met., No. 1, 2–6 (1984).
V. M. Zinchenko and V. Ya. Syropyatov, “A new method for low-temperature chemicothermal treatment,” in: Materials of the 3rd Conf. of Metal Scientists of Russia [in Russian], RDNTP, Ryazan (1996), pp. 20–23.
V. M. Zinchenko, V. Ya. Syropyatov, O. N. Safonova, and V. V. Barelko, “A new way in low-temperature chemical heat treatment of metals,” in: Abs. 10th Congr. Int. Federation for Heat Treatment and Surface Engineering, Brighton, U.K. (1996), pp. 12–13.
V. M. Zinchenko, V. Ya. Syropyatov, V. V. Barelko, and L. A. Bykov, “Gas nitriding in catalytically prepared ammonia media,” Metalloved. Term. Obrab. Met., No. 7, 7–11 (1997).
”RF Patent No. 2048601. MKI 5A23C8_36, A method for diagnosing the process of chemicothermal treatment of steels and alloys in glow discharge and a device for its realization,” Izobr. Otkr., No. 32 (1995).
N. M. Ryzhov, A. E. Smirnov, K. I. Kirillov, and M. Yu. Semenov, “A complex system for controlling the process of ion nitrocarburizing,” Metalloved. Term. Obrab. Met., No. 1, 11–15 (1996).
S. A. Gerasimov, Progressive Methods of Nitriding [in Russian], Mashinostroenie, Moscow (1985).
S. A. Gerasimov, Scientific Foundations of the Development of Technological Processes of Nitriding of Structural Alloy Steels for Improving the Working Capacity of Wearing Machine Joints, Author's Abstract of Doctoral Thesis [in Russian], MGTU, Moscow (1997).
S. F. Yur'ev, Deformation of Steel in Chemicothermal Treatment [in Russian], Mashgiz, Moscow (1950).
A. N. Minkevich, Chemicothermal Treatment of Steel [in Russian], Mashgiz, Moscow (1950).
G. N. Dubinin, Diffusion Chromizing of Alloys [in Russian], Mashinostroenie, Moscow (1964).
G. N. Dubinin, “On the mechanism of formation of a diffusion layer,” in: Protective Coatings of Metals, Issue 10 [in Russian], Naukova Dumka, Kiev (1976), pp. 12–17.
G. N. Dubinin, “Problems of the theory of chemicothermal treatment of alloys,” in: Protective Coatings of Metals, Issue 20 [in Russian], Naukova Dumka, Kiev (1986), pp. 5–11.
I. F. Afonskii, O. I. Ver, and A. V. Smirnov, Theory and Practice of Steel Nitriding [in Russian], GNTIMMChM, Moscow – Leningrad (1933).
V. V. Barelko, Yu. E. Volodin, and E. S. Gen'kin, “'Catalytic' emission of charges in the reaction of oxidation of ammonia on platinum,” Dokl. Ross. Akad. Nauk, 341(2), 198 (1995).
V. V. Barelko, “New block catalytic systems on glass-fiber and metal-fiber carriers,” in: Block Carriers and Catalysts with Cellular Structure, Coll. Works, Vol. 1 [in Russian], St. Petersburg (1995), p. 118.
V. Ya. Syropyatov, V. V. Barelko, V. M. Zintchenko, and L. A. Bikov, “Heterogeneous-catalytic activation of ammonia-air furnace atmosphere as a new way in surface nitriding of metals and alloys technology,” in: Catalysts on the Eve of the 21st Century, Memorial G. K. Boreskov Conf., Part 2, BIK, Novosibirsk (1997), pp. 139–140.
V. Ya. Syropyatov, V. V. Barelko, V. M. Zinchenko, and L. A. Bykov, “'Catalytic' nitriding: new prospects of low-temperature deformation-free CTT in the technology of gears, Mater. Int. Conf. 'Wear Resistance of Gear Transmissions and Gears,'” Tekhn. Mashinostr., No. 1, 29–30 (1997).
V. Ya. Syropyatov, V. M. Zinchenko, V. V. Barelko, and L. A. Bykov, “New possibilities of gas nitriding (reserves of the hundred-year-old technology),” Nauka Proizv., No. 1, 24–36 (1998).
Yu. M. Lakhtin, O. V. Chudina, and V. S. Kraposhin, “Complex laser chemicothermal treatment of low-carbon steels,” in: Methods for Raising the Structural Strength of Metallic Materials,Mater. Seminar [in Russian], MDNTP, Moscow (1988), pp. 116–117.
O. V. Chudina, “Special features of formation of a hardened layer in laser alloying of steel and subsequent nitriding,” in: Increasing the Reliability and Life of Materials and Machine Parts on the Base of New Methods of Heat and Chemicothermal Treatment, Abs. Rep. All-Union Sci.-Tech. Conf., Khmelnitsky [in Russian] (1988), pp. 132–133.
O. V. Chudina, “Combined surface hardening of steel (laser alloying + nitriding),” Metalloved. Term. Obrab. Met., No. 3, 2–5 (1994).
O. V. Chudina, “Surface alloying of iron-carbon alloys with the use of laser heating,” Metalloved. Term. Obrab. Met., No. 12, 2–7 (1994).
O. V. Chudina and T. M. Borovskaya, “Hardening of steel surfaces by alloying with laser heating and subsequent chemicothermal treatment,” Metalloved. Term. Obrab. Met., No. 7, 11–14 (1997).
T. A. Panaioti, Nitriding of High-Strength Steels and Alloys in Glow Discharge [in Russian], Mashinostroenie, Moscow (1989).
T. A. Panaioti and G. V. Solov'ev, “Ion nitriding of α and (α+β) titanium alloys,” Vestn. MGTU, Ser. Mashinostr., No. 1, 15–24 (1994).
T. A. Panaioti and G. V. Solov'ev, “Special features of formation of diffusion layers in ion nitriding of α and (α+β) titanium alloys in a temperature range of 500 – 1000°C,” Metalloved. Term. Obrab. Met., No. 5, 34–37 (1994).
T. A. Panaioti and G. V. Solov'ev, “Ion nitriding of aging (α+β) titanium alloys,” Metalloved. Term. Obrab. Met., No. 5, 28–31 (1996).
T. A. Panaioti and G. V. Solov'ev, “Ion nitriding of α and (α+β) titanium alloys,” Vestn. MGTU, Ser. Mashinostr., No. 1, 15–24 (1994).
D. A. Prokoshkin, T. A. Panaioti, A. S. Gorbova, and V. N. Kashirtsev, “A study of nitriding of titanium,” Metalloved. Term. Obrab. Met., No. 5, 32–35 (1984).
T. A. Panaioti, “Surface and volume nitriding of refractory metals and alloys,” Tr. MVTU im. N. É. Baumana, No. 497, 25–37 (1987).
T. A. Panaioti, “Nitriding as a method for hardening refractory metals and their alloys,” in: 3rd Congr. Metal Scientists of Russia [in Russian], RDNTP, Ryazan (1996), pp. 44–46.
T. I. Vasil'eva, T. A. Panaioti, and A. S. Gorbova, “New methods for raising the strength properties of niobium alloys,” Tr. MVTU im. N. É. Baumana, No. 280, 27–34 (1978).
T. A. Panaioti, “A study of niobium-nitrogen alloys after quenching and aging,” Metalloved. Term. Obrab. Met., No. 7, 15–19 (1990).
D. A. Prokoshkin, E. V. Vasil'eva, and T. A. Panaioti, “Effect of nitriding on the high-temperature properties of a niobium alloy,” Izv. Akad. Nauk SSSR, Metally, No. 2, 209–215 (1981).
T. A. Panaioti and S. G. Tsikh, “Mechanical properties of nitrided tantalum under elevated temperatures,” Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, No. 11, 109–113 (1989).
Rights and permissions
About this article
Cite this article
Bannykh, O.A., Zinchenko, V.M., Prusakov, B.A. et al. Development of Nitriding in Russia. Fourth Period (1980 – Present Time): New Directions in the Development Of LTCTT. Metal Science and Heat Treatment 43, 131–137 (2001). https://doi.org/10.1023/A:1010501518431
Issue Date:
DOI: https://doi.org/10.1023/A:1010501518431