Abstract
This paper was prepared to review the status of the aluminum sheet and plate industries and related research activities in Korea. The aluminum sheets and plates which have been produced in Korea are mainly non-heat treatable alloys, so that the installations of the heat treatment facilities for producing the heat treatable sheets and plates are considered recently by aluminum industries in Korea. Concerning the research activities on the aluminum sheets and plates in Korea, the research topics and contents are mainly described on the basis of the highly advanced national projects which have been started since the middle of 1992.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K.C. Rhee and S.H. Ahn, Bull. of the Korean Inst. of Met. & Mater. 6(2), 176 (1993).
Catalogue of and communication with Choil Aluminum Mfg. Co. Ltd.
Catalogue of and communication with Aluminum of Korea Ltd.
Catalogue of and communication with Taihan Electric Wire Co. Ltd., Youngju Plant.
M.C. Shin and Y.H. Chung, Summary intrim report of first stage HAN project related on developing high strength aluminum alloys, 1995.
M.J. Wheeler, Aluminum structured vehicles-The technology, the weight savings, the performance and value of such vehicles for the auto companies and their customers, Presentation to Washington, DC, Section of the SAE, 1995.
Y.L. Liu and S.B. Kang, Scripta Met. Mater. 30, 487 (1994).
W.D. Fei and S.B. Kang, J. Mat. Sci. Letters 14, 1795 (1995).
Y.L. Liu, S.B. Kang, H.K. Cho, and Z.Q. Hu, Fourth Int. Conf. on Al Alloys(Atlanta, Georgia, USA, 1994), p. 306.
H.W. Kim and S.B. Kang, Second Pacific Rim Int. Conf. on Adv. Mat. & Proc.(Kyongju, Korea, 1995), p. 2203.
W.D. Fei and S.B. Kang, Scripta Met. Mater. 34, 357 (1996).
N.C. Kwon, C.S. Yoon, and H. Kang, Hyundai Automobile Co. Ltd., Interim Report, MOST, BSG 031-2117, 1995.
L. Zhen, S.B. Kang, H.W. Kim, and S.T. Lee, Fifth Int. Conf. on Al Alloys(Grenoble, France, 1996), p. 1031.
L. Zhen, S.B. Kang, and H.W. Kim, Scripta Met. Mater. 36, 1089 (1997).
L. Zhen, W.D. Fei, S.B. Kang, and H.W. Kim, J. Mat. Sci. 32, 1895-1902 (1997).
I.G. Moon, J.W. Park, and J.E. Yoo, Materials Science Forum 170-172, 255-260 (1994), 1994 Trans Tech publication, Switzerland.
J.E. Yoo, J.W. Park, and I.G. Moon, Journal of the Korean Institute of Metals and Materials 30(4), 454-461 (1992).
G.S. Kang, J.W. Park, I.G. Moom, D.H. Shin, and S.J. Maeng, Journal of the Korean Institute of Metals and Materials 30(9), 1119-1126 (1992).
J.W. Park, H.S. Kim, I.G. Moon, K.Y. Ha, and D.Y. Lee, Korean Journal of Materials Research 5(1), 132-139 (1995).
J.W. Park, I.G. Moon, and H.S. Kim, Development of superplastic aluminum alloy and superplastic forming technology (III), BSN1254-5519-1, MOST, Seoul, 1995.
J.W. Park, J.E. Yoo, and I.G. Moon, Journal of the Korean Institute of Metals and Materials 30(2), 196-202 (1992).
I.G. Moon, J.W. Park, and J.E. Yoo, Grain refining and superplastic forming of aluminum alloys, UCN745(9)4251-1, MOST, Seoul, 1991.
Dong Nyung Lee, Conference on Superplastic Forming(Agency for Defence Development, Taejon, Korea, 1991).
H. Hub, Conference on Superplastic Forming(Agency for Defence Development, Taejon, Korea, 1991), chap. 3.
H. Osawa and H. Nishimura, Journal of Japan Institute of Light Metals 39(11), 765-775 (1989).
H. Yoshida, H. Danaka, and S. Tsuchida, 29(1), 58-68 (1988).
Y. Baba and H. Yoshida, Journal of the Japan Society for Technology of Plasticity (JSTP) 27(302), 333-338 (1986-3).
R. Grimes and R.G. Butler, in Superplasticity in Aerospace, edited by H.C. Heikkenen and T.R. McNelley (The Metallurgical Society, 1988), pp. 97-113.
M. Matsuo, SKY aluminium Co., Ltd., 3-18 Nihombashi Muromachi 4-chome, Chuo-ku, Tokyo 103, Japan (1995).
B.J. Dunwoody, R. J. Stracey, and A.J. Barnes, Superplasticity in metals, ceramics and intermetallics, in MRS Symp. Proc., edited by M.J. Mayo, M. Kobayashi, and J. Wadsworth (Materials Research Society, Pittsburgh, Pennsylvania, USA, 1990), vol. 196, pp. 161-166.
H. Watanabem, K. Ohori, and Y. Takeuchi, Trans. ISIJ 27, 730-733 (1987).
K. Higashi, Journal of Japan Institute of Light Metals 39(11), 751-764 (1989).
Author information
Authors and Affiliations
About this article
Cite this article
Kang, SB. The Status of the Aluminum Sheet and Plate Industries and Related Research Activities in Korea. Advanced Performance Materials 5, 291–306 (1998). https://doi.org/10.1023/A:1008657132289
Issue Date:
DOI: https://doi.org/10.1023/A:1008657132289