Abstract
This paper investigates cylindrical samples made of vacuum packed particles. Such structures are composed of granular media placed in a hermetic encapsulation where, in the final stage, a partial vacuum is generated. The main advantage of such a structure is that the underpressure value makes it possible to control the global physical properties of granular systems. Materials with various grains are analyzed in the paper. A modified Bouc-Wen hysteresis model is adopted to describe the nonlinear properties of the tested specimens. To identify the model parameters, a genetic algorithm is applied. The proposed model is found to be in good agreement with the experimental data.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. Zalewski, P. Chodkiewicz, Gubanov model for vacuum packed particles, in: Mechatronics 2013, Springer, 2014 57–63.
P. Chodkiewicz, J. Lengiewicz, R. Zalewski, DEM modeling of Vacuum Packed Particles Damper, 2018.
Y. Parepalli, S. Reddy Pamanji, M. CHAVALI, An overview of smart materials in nanoscience and nanotechnology, Int. J. Nanosci. Nanotechnol. 3 (2014) 9–14.
J. Wang, G. Meng, Magnetorheological fluid devices: principles, characteristics and applications in mechanical engineering., Proc. Inst. Mech. Eng. L: J. Mater. Des. Appl. (2001) 165–174.
M. Luscombe, J. Williams, Comparison of a long spinal board and vacuum mattress for spinal immobilisation, Emerg. Med. J. 20 (5) (2003) 476–478.
E. Brown, N. Rodenberg, J. Amend, A. Mozeika, E. Steltz, M.R. Zakin, H. Lipson, H.M. Jaeger, Universal robotic gripper based on the jamming of granular material, Proc. Natl. Acad. Sci. 107 (44) (2010) 18809–18814.
A.J. Loeve, O.S. van de Ven, J.G. Vogel, P. Breedveld, J. Dankelman, Vacuum packed particles as flexible endoscope guides with controllable rigidity, Granular Matter 12 (6) (2010) 543–554.
A. Mozeika, E. Steltz, M.H. Jaeger, The first steps of a robot based on jamming skin enabled locomotion, in: IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009, 408–409.
A. Jiang, T. Aste, P. Dasgupta, K. Althoefer, T. Nanayakkara, Granular Jamming with Hydraulic Control, 2013.
R. Zalewski, T. Szmidt, Application of special granular structures for semi-active damping of lateral beam vibrations, Eng. Struct. 65 (2014) 13–20.
J. Bajkowski, B. Dyniewicz, C. Bajer, Corrigendum to “damping properties of a beam with vacuum-packed granular damper” [J. Sound Vib. 341 (2015) 74–85], J. Sound Vib. (2016) 377.
T. Szmidt, R. Zalewski, Inertially excited beam vibrations damped by vacuum packed particles, Smart Mater. Struct. 23 (10) (2014) 105026.
R. Zalewski, P. Chodkiewicz, Semi-active linear vacuum packed particles damper, J. Theor. Appl. Mech. 54 (1) (2016) 311–316.
R. Zalewski, P. Chodkiewicz, M. Shillor, Vibrations of a massspring system using a granular-material damper, Appl. Math. Modell. 40 (17–18) (2016) 8033–8047.
P. Bartkowski, R. Zalewski, A concept of smart multiaxial impact damper made of vacuum packed particles, in: MATEC Web of Conferences, page 05001. EDP Sciences, (2018) 157.
B. Spencer Jr., S. Dyke, M. Sain, J. Carlson, Phenomenological model for magnetorheological dampers, J. Eng. Mech. 123 (3) (1997) 230–238.
T. Butz, O. Von Stryk, Modelling and simulation of electro-and magnetorheological fluid dampers, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik: Applied Mathematics and Mechanics 82 (1) (2002) 3–20.
G. Yang, B.F. Spencer Jr., H.-J. Jung, J.D. Carlson, Dynamic modeling of large-scale magnetorheological damper systems for civil engineering applications, J. Eng. Mech. 130 (9) (2004) 1107–1114.
D. Gamota, F. Filisko, Dynamic mechanical studies of electrorheological materials: moderate frequencies, J. Rheol. 35 (3) (1991) 399–425.
D. Lederer, H. Igarashi, A. Kost, T. Honma, On the parameter identification and application of the Jiles-Atherton hysteresis model for numerical modeling of measured characteristics, IEEE Trans. Magnet. 35 (1999) 1211–1214.
M. Asif Zaman, C. Hansen, P.T. Neustock, L. Padhy, P.L. Hesselink, Adjoint Method for Estimating Jiles-Atherton Hysteresis Model Parameters, 120, 2016, . p. 093903.
G. Bertotti, Dynamic generalization of the scalar Preisach model of hysteresis, IEEE Trans. Magnet. 28 (1992) 2599–2601.
R. Bouc, Forced vibrations of mechanical systems with hysteresis, in: Proceedings of the Fourth Conference on Nonlinear Oscillations, Prague, (1967) 1967.
Y.-K. Wen, Method for random vibration of hysteretic systems, J. Eng. Mech. Div. 102 (2) (1976) 249–263.
M. Ye, X. Wang, Parameter estimation of the Bouc-Wen hysteresis model using particle swarm optimization, Smart Mater. Struct. 16 (2007) 2341.
M. Asif Zaman, U. Sikder, Bouc-Wen hysteresis model identification using modified firefly algorithm, J. Magnet. Magnet. Mater. 395 (2015) 229–233.
S. Kirkpatrick, D. Gelatt Jr., P.M. Vecchi, Optimization by simulated annealing, Science 220 (1983) 671–680.
M. Pyrz, M. Krzywoblocki, Crashworthiness optimization of thin-walled tubes using macro element method and evolutionary algorithm, Thin-Walled Struct. 112 (2017) 12–19.
A.S. Fraser, Simulation of genetic systems by automatic digital computers i. introduction, Aust. J. Biol. Sci. 10 (4) (1957) 484–491.
A. Fraser, D. Burnell, et al., Computer Models in Genetics, 1970.
J. Holland, D. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley, Massachusetts, 1989.
Z. Michalewicz, Evolution strategies and other methods, in: Genetic Algorithms + Data Structures = Evolution Programs, Springer, 1996 159–177.
J.J. Grefenstette, Genetic algorithms and machine learning., in: Proceedings of the Sixth Annual Conference on Computational Learning Theory, ACM, (1993) 3–4.
J. Shapiro, Genetic algorithms in machine learning, in: Advanced Course on Artificial Intelligence, Springer, 1999 146–168.
C. Reeves, Genetic algorithms and combinatorial optimization, Appl. Modern Heuristic Methods 111 (1995) 126.
M. Pyrz, F. Zairi, Identification of viscoplastic parameters of phenomenological constitutive equations for polymers by deterministic and evolutionary approach, Model. Simul. Mater. Sci. Eng. 15 (2) (2007) 85.
J. Zhou, B. Wang, J. Lin, L. Fu, Optimization of aluminum alloy anti-collision side beam hot stamping process using multi-objective genetic algorithm, Arch. Civil Mech. Eng. 13 (2013) 401–411.
R. Zalewski, P. Chodkiewicz, M. Pyrz, Modeling of complex properties of vacuum packed particles using evolutionary algorithms, in: New Contributions in Information Systems and Technologies, Springer, 2015 267–276.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bartkowski, P., Zalewski, R. & Chodkiewicz, P. Parameter identification of Bouc-Wen model for vacuum packed particles based on genetic algorithm. Archiv.Civ.Mech.Eng 19, 322–333 (2019). https://doi.org/10.1016/j.acme.2018.11.002
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1016/j.acme.2018.11.002