Abstract
The reciprocating extrusion (cyclic extrusion compression — CEC) process was applied to the consolidation of silver powder AgSnBi leading to the bulk material formation. Continue process of deformation by hydrostatic extrusion and then by forging the electrical contacts were produced. Microstructure and microhardness were investigated in every stage of deformation showing development of process consolidation. The relative density of material was evaluated on the base of voids existing inside the microstructure.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
C.M. Sonsino, Methods to determine relevant materials properties for the fatigue design of powder metallurgy parts, Powder Metallurgy 16 (1) (1984) 34–38.
A. Salak, M. Selecka, Mechanical and friction properties of sintered (1-5)% manganese steel, in: 3rd International Powder Metallurgy Conference, Turkish Powder Metallurgy Association, Ankara, 2002 230–246.
P.J. James, Particle deformation during cold isostatic pressing of metal powder, International Journal of Powder Metallurgy 20 (4) (1977) 199–204.
A.K. Eksi, A.H. Yuzbasioglu, Effect of sintering and pressing parameters on the densification of coidisostatically pressed Al and Fe powders, Materials & Design 28 (2007) 1364–1368.
K. Xia, X. Wu, Back pressure equal channel angular consolidation of pure Al particles, Scripta Materialia 53 (2005) 1225–1229.
M.H. Paydar, M. Reihanian, E. Bagherpour, M. Sharifzadeh, M. Zarinejad, T.A. Dean, Equal channel angular pressing - forward extrusion (ECAP-FE) consolidation of Al Particles, Materials & Design 30 (2009) 429–432.
M.W. Richert, J. Richert, A. Hotloś, M. Mroczkowski, T. Tokarski, The effect of reciprocating extrusion (CEC) on the consolidated silver powders microstructure, Archives of Metallurgy and Materials 58 (1) (2013) 73–77.
M. Richert, J. Richert, A. Hotloś, P. Pałka, W. Pachla, M. Perek, Ag powder consolidated by reciprocating extrusion (CEC), Materials Science Forum 667-669 (2011) 145–150 (online available since 2010/Dec/30 at www.scientific.net).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Richert, M.W., Richert, J., Leszczyńska-Madej, B. et al. AgSnBi powder consolidated by CEC reciprocal extrusion. Archiv.Civ.Mech.Eng 14, 580–585 (2014). https://doi.org/10.1016/j.acme.2014.04.002
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1016/j.acme.2014.04.002