Abstract
We propose a highly refractive index sensor based on plasmonic Bow Tie configuration. The sensitivity of the resonator design is enhanced by incorporating a nanowall (NW) in a modified Bow Tie design where sharp tips of V-junction are flattened. This approach provides high confinement of electric field distribution of surface plasmon polariton (SPP) mode in the narrow region of the cavity. Consequently, the effective refractive index (neff) of the mode increases and is highly responsive to the ambient medium. The sensitivity analysis of the SPP mode is calculated for six resonator schemes. The results suggest that the NW embedded cavity offers the highest mode sensitivity due to the large shift of effective index when exposed to a slight change in the medium refractive index. Moreover, the device sensitivity of the proposed design is approximated at 2300 nm/RIU which is much higher than the sensitivity of the standard Bow Tie configuration.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
W. L. Barnes, A. Dereux, and T. W. Ebbesen, “Surface plasmon subwavelength optics,” Nature, 2003, 424(6950): 824–830.
B. Hecht, H. Bielefeldt, L. Novotny, Y. Inouye, and D. W. Pohl, “Local excitation, scattering, and interference of surface plasmons,” Physical Review Letters, 1996, 77(9): 1889.
C. I. Lin and T. K. Gaylord, “Multimode metal-insulator-metal waveguides: analysis and experimental characterization,” Physical Review B, 2012, 85(8): 085405.
M. Singh and S. K. Rughuwanshi, “Metal-insulator-metal waveguide based passive structures analyzed by transmission line model,” Superlattices and Microstructures, 2018, 114: 233–241.
J. Lin, J. Dellinger, P. Genevet, B. Cluzel, F. D. Fornel, and F. Capasso, “Cosine-Guass plasmon beam: a localized long range-nondiffracting surface wave,” Physical Review Letters, 2012, 109(9): 093904.
M. A. Izadi and R. Nouroozi, “Adjustable propagation length enhancement of the surface plasmon polariton wave via phase sensitive optical parametric amplification,” Scientific Reports, 2018, 8(1): 1–14.
C. H. Du and Y. P. Chiou, “Vertical directional couplers with ultra-short coupling length based on hybrid plasmonic waveguides,” Journal of Lightwave Technology, 2014, 32(11): 2065–2071.
B. Yun, G. Hu, and Y. Cui, “Theoretical analysis of a nanoscale plasmonic filter based on a rectangular metal-insulator-metal waveguide,” Journal of Physics D: Applied Physics, 2010, 43(38): 385102.
S. Khani, M. Danaie, and P. Rezaei, “Size reduction of MIM surface plasmon based optical bandpass filters by the introduction of arrays of silver nano-rods,” Physica E: Low-Dimensional Systems and Nanostructures, 2019, 113: 25–34.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “Highly sensitive refractive index sensor based on hybrid plasmonic waveguide microring resonator,” Waves in Random and Complex Media, 2020, 30(2): 292–299.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “Hybrid plasmonic waveguide-assisted metalinsulator-metal ring resonator for refractive index sensing,” Journal of Modern Optics, 2018, 65(9): 1135–1140.
M. A. Butt, S.N. Khonina, and N. L. Kazanskiy, “A multichannel metallic dual nano-wall square split-ring resonator: design analysis and applications,” Laser Physics Letters, 2019, 16: 126201.
Y. Y. Xie, C. He, J. C. Li, T. T. Song, Z. D. Zhang, and Q. R. Mao, “Theoretical investigation of a plasmonic demultiplexer in MIM waveguide crossing with multiple side-coupled hexagonal resonators,” IEEE Photonics Journal, 2016, 8(5): 1–12.
S. Qu, C. Ma, and H. Liu, “Tunable graphene-based hybrid plasmonic modulators for subwavelength confinement,” Scientific Reports, 2017, 7(1): 1–8.
A. N. Taheri and H. Kaatuzian, “Design and simulation of a nanoscale electro-plasmonic 1×2 switch based on asymmetric metal-insulator-metal stub filters,” Applied Optics, 2014, 53(28): 6546–6553.
C. H. Chen and K. S. Liao, “1×N plasmonic power splitters based on metal-insulator-metal waveguides,” Optics Express, 2013, 21(4): 4036–4043.
P. Vaiano, B. Carotenuto, M. Pisco, A. Ricciardi, G. Quero, M. Consales, et al., “Lab on fiber technology for biological sensing applications,” Laser & Photonics Reviews, 2016, 10(6): 922–961.
X. Cheng, J. Bonefacino, B. O. Guan, and H. Y. Tam, “All-polymer fiber-optic pH sensor,” Optics Express, 2018, 26(11): 14610–14616.
S. Wang, K. Broderick, H. Smith, and Y. Yi, “Strong coupling between on chip notched ring resonator and nanoparticle,” Applied Physics Letters, 2010, 97(5): 051102.
Z. D. Zhang, H. Y. Wang, and Z. Y. Zhang, “Fano resonance in a gear-shaped nanocavity of the metal-insulator-metal waveguide,” Plasmonics, 2013, 8(2): 797–801.
Z. Guo, K. Wen, Q. Hu, W. Lai, J. Lin, and Y. Fang, “Plasmonic multichannel refractive index sensor based on subwavelength tangent-ring metal-insulator-metal waveguide,” Sensors, 2018, 18(5): 1348.
Z. Zhang, J. Yang, X. He, J. Zhang, J. Huang, D. Chen, et al., “Plasmonic refractive index sensor with high figure of merit based on concentric-rings resonator,” Sensors, 2018, 18(1): 116.
N. L. Kazanskiy and M. A. Butt, “Enhancing the sensitivity of a standard plasmonic MIM square ring resonator by incorporating nano-dots in the cavity,” Photonics Letters of Poland, 2020, 12(1): 1–3.
Y. Y. Xie, Y. X. Huang, W. L. Zhao, W. H. Xu, and C. He, “A novel plasmonic sensor based on metal-insulator-metal waveguide with a side-coupled hexagonal cavity,” IEEE Photonics Journal, 2015, 7(2): 1–12.
S. Wang, S. Yu, T. Zhao, Y. Wang, and X. Shi, “A nanosensor with ultra-high FOM based on tunable malleable multiple Fano resonances in a waveguide coupled isosceles triangular resonator,” Optics Communications, 2020, 465: 125614.
S. Yan, M. Zhang, X. Zhao, Y. Zhang, J. Wang, and W. Jin, “Refractive index sensor based on a metal-insulator-metal waveguide coupled with a symmetric structure,” Sensors, 2017, 17(12): 2879.
X. Zhao, Z. Zhang, and S. Yan, “Tunable Fano resonance in asymmetric MIM waveguide structure,” Sensors, 2017, 17(7): 1494.
Y. Zhang, Y. Kuang, Z. Zhang, Y. Tang, J. Han, R. Wang, et al., “High-sensitivity refractive index sensors based on Fano resonance in the plasmonic system of splitting ring cavity-coupled MIM waveguide with tooth cavity,” Applied Physics A, 2019, 125(13): 1–5.
Y. Zhang and M. Cui, “Refractive index sensor based on the symmetric MIM waveguide structure,” Journal of Electronic Materials, 2019, 48(2): 1005–1010.
S. B. Yan, L. Luo, C. Y. Xue, and Z. D. Zhang, “A refractive index sensor based on a metalinsulator-metal waveguide-coupled ring resonator,” Sensors, 2015, 15(11): 29183–29191.
P. C. Wu, G. Sun, W. T. Chen, K. Y. Yang, Y. W. Huang, Y. H. Chen, et al., “Vertical split-ring resonator based nanoplasmonic sensor,” Applied Physics Letters, 2014, 105(3): 033105.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “A multichannel metallic dual nano-wall square split-ring resonator: design analysis and applications,” Laser Physics Letters, 2019, 16(12): 126201.
S. Yu, T. Zhao, J. Yu, and D. Pan, “Tuning multiple fano resonances for on-chip sensors in a plasmonic system,” Sensors, 2019, 19(7): 1559.
P. D. Sia, “Overview of Drude-Lorentz type models and their applications,” Nanoscale Systems: Mathematical Modeling, Theory and Applications, 2014, 3(1): 1–13.
J. Homola, S. Sinclair, and G. Gauglitz, “Surface plasmon resonance sensors: review,” Sensors and Actuators B: Chemical, 1999, 54(1–2): 3–15.
W. Wei, X. Zhang, and X. Ren, “Plasmonic circular resonators for refractive index sensors and filters,” Nanoscale Research Letters, 2015, 10(1): 211.
S. Gaur, R. Zafar, and D. Somwanshi, “Plasmonic refractive index sensor based on metal insulator metal waveguide,” IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2014), India, Dec. 23–35, pp. 1–4, 2016.
Z. Zhang, L. Luo, C. Xue, W. Zhang, and S. Yan, “Fano resonance based on metal-insulator-metal waveguide-coupled double rectangular cavities for plasmonic nanosensors,” Sensors, 2016, 16(5): 642.
B. F. Yun, G. H. Hu, R. H. Zhang, and Y. P. Cui, “Fano resonances in a plasmonic waveguide system composed of stub coupled with a square cavity resonator,” Journal of Optics, 2016, 18(5): 055002.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “Plasmonic refractive index sensor based on MIM square ring resonator,” 2018 International Conference on Computing, Electronic and Electrical Engineering (ICE Cube), Pakistan, Nov. 12–13, pp. 1–4, 2018.
S. Asgari and N. Granpayeh, “Tunable mid-infrared refractive index sensor composed of asymmetric double graphene layers,” IEEE Sensors Journal, 2019, 19(14): 5686–5691.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “Plasmonic refractive index sensor based on metal-insulator-metal waveguides with high sensitivity,” Journal of Modern Optics, 2019, 66(9): 1038–1043.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “Metal-insulator-metal nano square ring resonator for gas sensing applications,” Waves in Random and Complex Media, 2019, DOI.org/10.1080/17455030.2019.1568609.
L. Wang, Y. P. Zeng, Z. Y. Wang, X. P. Xia, and Q. Q. Liang, “A refractive index sensor based on an analogy T shaped metal-insulator-metal waveguide,” Optik, 2018, 172: 1199–1204.
Y. Chen, Y. Xu, and J. Cao, “Fano resonance sensing characteristics of MIM waveguide coupled Square Convex Ring Resonator with metallic baffle,” Results in Physics, 2019, 14: 102420.
M. Danaie and A. Shahzadi, “Design of a high-resolution metal-insulator-metal plasmonic refractive index sensor based on a ring-shaped Si resonator,” Plasmonics, 2019, 14: 1453–1465.
M. A. Butt, S. N. Khonina, and N. L. Kazanskiy, “An array of nano-dots loaded MIM square ring resonator with enhanced sensitivity at NIR wavelength range,” Optik, 2020, 202: 163655.
M. Feldman, Nanolithography: the art of fabricating nanoelectronic and nanophotonic devices and systems. England: Woodhead Publishing, 2014.
Acknowledgement
This work was financially supported by the Ministry of Science and Higher Education within the State assignment FSRC “Crystallography and Photonics” RAS (Grant No. 007-GZ/Ch3363/26).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Butt, M.A., Kazanskiy, N.L. & Khonina, S.N. Highly Sensitive Refractive Index Sensor Based on Plasmonic Bow Tie Configuration. Photonic Sens 10, 223–232 (2020). https://doi.org/10.1007/s13320-020-0588-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-020-0588-z