Abstract
The power transformer is the most important equipment of the high voltage power grid, however, some traditional methods of online partial discharge monitoring have some limitations. Based on many advantages of the optical fiber sensing technology, we have done some research on fiber optics Fabry-Perot (FP) sensing which can be useful for the transformer on online partial discharge monitoring. This research aimed at improving the reliability of power system safety monitoring. We have done some work as follows: designing a set for fiber optics FP sensor preparation, according to the fabrication procedure strictly making out the sensors, building a reasonable signal demodulation system for fiber optics FP sensing, doing a preliminary analysis about online partial discharge signal monitoring, including the research on different discharge intensities with the same measuring distance and different measuring distances with the same discharge intensity, and then making a detailed analysis of the experimental results.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. Tang, Y. OuYang, M. Fan, X. Zhang, and Y. Liu, “System using fluorescent fiber for partial discharge detection in transformer,” High Voltage Engineering, 2011, 37(5): 1129–1135.
J. Tang, J. Zhou, X. Zhang, and F. Liu, “A transformer partial discharge measurement system based on fluorescent fiber,” Energies, 2012, 5(5): 1490–1502.
G. C. Stone, “A perspective on online partial discharge monitoring for assessment of the condition of rotating machine stator winding insulation,” IEEE of Electrical Insulation Magazine, 2012, 28(5): 8–13.
L. Bao, “Introduction to the on-line transformer PD detection technology,” Southern Power System Technology, 2009, 2(6): 81–83.
N. D. Jacob, W. M. Mcdermid, and B. Kordi, “On-line monitoring of partial discharges in a HVDC station environment,” IEEE Transactions on Dielectrics and Electrical Insulation, 2012, 19(3): 925–935.
D. Wen, G. Wu, L. Zhou, J. Liu, P. Du, and Y. Liu, “Present status and outlook of PD online monitoring system in power transformer,” Electric Age, 2010, 7: 74–77.
D. Xiao, J. Yang, X. Xu, et al., “Fiber optical sensors for partial discharge monitoring in power transformers,” Electrical Equipment, 2004(3): 16–18.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Wang, K., Tong, X. & Zhu, X. Transformer partial discharge monitoring based on optical fiber sensing. Photonic Sens 4, 137–141 (2014). https://doi.org/10.1007/s13320-014-0181-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-014-0181-4