Abstract
Using the finite volume method, a directional solidification (DS) furnace used to grow a multi-crystalline silicon (mc-Si) ingot is numerically simulated in 2-dimensions. The impact of argon gas flow pattern on the melt-free surface (M-FS) was studied using transient global simulations of oxygen and carbon-dependent transport in laboratory-scale DS furnaces for solar cell applications. Argon gas flow (AGF) patterns over the M-FS affects the temperature of the upper part of the silicon melt. In the conventional furnace, AGF pattern is opposite to the growth direction. In a modified furnace system, argon gas is distributed through the melt vertical to the growth direction. In the modified furnace, during the crystallisation process, the evaporated SiO flux at the top of the M-FS reduces, resulting in a decrease in oxygen concentration in the grown ingot. A modified AGF pattern that inhibits the reaction between SiO gas and hot graphite material shows an exponential reduction of carbon concentration in the as-grown ingot. The conventional ingot obtained the oxygen and carbon concentrations within 6.61E17 and 9.04E16 atoms/cm3 respectively and the modified ingot obtained the oxygen and carbon impurity concentrations within 2.2E17 and 5.32E16 atoms/cm3, respectively. The modified AGF pattern improves the quality of mc-Si ingots for PV applications.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Data Availability
No datasets were generated or analysed during the current study.
Code Availability
Not Applicable.
References
Popovich VA, Geerstma W, Janssen M et al (2015) Mechanical strength of silicon solar wafers characterized by ring-on-ring test in combination with digital image correlation. In: TMS Annual Meeting. John Wiley & Sons, Inc., Hoboken, NJ, USA, p 241–248
Blakers A, Zin N, McIntosh KR, Fong K (2013) High efficiency silicon solar cells. Energy Procedia 33:1–10. https://doi.org/10.1016/j.egypro.2013.05.033
Matsuo H, Bairava Ganesh R, Nakano S et al (2008) Thermodynamical analysis of oxygen incorporation from a quartz crucible during solidification of multicrystalline silicon for solar cell. J Cryst Growth 310:4666–4671. https://doi.org/10.1016/j.jcrysgro.2008.08.045
Trempa M, Reimann C, Friedrich J, Müller G (2010) The influence of growth rate on the formation and avoidance of C and N related precipitates during directional solidification of multi crystalline silicon. J Cryst Growth 312:1517–1524. https://doi.org/10.1016/j.jcrysgro.2010.02.005
Raabe L, Pätzold O, Kupka I et al (2011) The effect of graphite components and crucible coating on the behaviour of carbon and oxygen in multicrystalline silicon. J Cryst Growth 318:234–238. https://doi.org/10.1016/j.jcrysgro.2010.11.142
Gao B, Nakano S, Kakimoto K (2013) Reduction of oxygen impurity in multicrystalline silicon production. Int J Photoenergy 2013:1–6. https://doi.org/10.1155/2013/908786
Modanese C, Di Sabatino M, Søiland AK et al (2011) Investigation of bulk and solar cell properties of ingots cast from compensated solar grade silicon. Prog Photovoltaics Res Appl 19:45–53. https://doi.org/10.1002/pip.986
Kerkar F, Kheloufi A, Dokhan N et al (2020) Oxygen and Carbon Distribution in 80Kg Multicrystalline Silicon Ingot. SILICON 12:473–478. https://doi.org/10.1007/s12633-019-00154-0
Kumar MA, Srinivasan M, Ramasamy P (2021) Reduction of Carbon and Oxygen Impurities in mc-Silicon Ingot Using Molybdenum Gas Shield in Directional Solidification Process. SILICON 13:4535–4544. https://doi.org/10.1007/s12633-020-00775-w
Li Z, Liu L, Liu X et al (2012) Effects of argon flow on melt convection and interface shape in a directional solidification process for an industrial-size solar silicon ingot. J Cryst Growth 360:87–91. https://doi.org/10.1016/j.jcrysgro.2011.11.053
Reimann C, Trempa M, Friedrich J, Müller G (2010) About the formation and avoidance of C and N related precipitates during directional solidification of multi-crystalline silicon from contaminated feedstock. J Cryst Growth 312:1510–1516. https://doi.org/10.1016/j.jcrysgro.2010.02.003
Teng YY, Chen JC, Huang BS, Chang CH (2014) Numerical simulation of impurity transport under the effect of a gas flow guidance device during the growth of multicrystalline silicon ingots by the directional solidification process. J Cryst Growth 385:1–8. https://doi.org/10.1016/j.jcrysgro.2013.01.040
Bellmann MP, Lindholm D, M’Hamdi M (2014) A novel method for gas flow and impurity control in directional solidification of multi-crystalline silicon. J Cryst Growth 399:33–38. https://doi.org/10.1016/j.jcrysgro.2014.04.019
Su W, Li J, Li C et al (2022) Design and Numerical Optimization of Gas Guidance System in Casting Silicon Furnace by the Orthogonal Experiment. SILICON 14:301–307. https://doi.org/10.1007/s12633-021-01192-3
Mukaiyama Y, Fukui Y, Taishi T, Artemiev V, Noda Y, Sueoka K (2022) Numerical Modeling and Evaluation of Constitutional Supercooling during Silicon Single Crystal Growth by Cz Method. In: The 8th International Symposium on Advanced Science and Technology of Silicon Materials
Kalaev VV (2012) Liquid flow in a cubic cavity generated by gas motion along the free surface. Int J Heat Mass Transf 55(19–20):5214–5221
Nguyen THT, Liao SH, Chen JC, Chen CH, Huang YH, Yang CJ, ..., Nguyen HB (2016) Effects of the hot zone design during the growth of large size multi-crystalline silicon ingots by the seeded directional solidification process. J Cryst Growth 452:27–34.
Liu X, Dang Y, Tanaka H, Fukuda Y, Kutsukake K, Kojima T, ..., Usami N (2022) Data-driven optimization and experimental validation for the lab-scale mono-like silicon ingot growth by directional solidification. ACS Omega 7(8):6665–6673
Sugunraj S, Aravindan G, Srinivasan M, Ramasamy P (2023) Influence of Argon Gas Flow Rate on Oxygen and Carbon Impurities Concentration in Multicrystalline Silicon Grown by Directional Solidification Furnace: Numerical and Experimental Investigation. SILICON 15:1701–1724. https://doi.org/10.1007/s12633-022-02097-5
Liu X, Gao B, Kakimoto K (2015) Numerical investigation of carbon contamination during the melting process of Czochralski silicon crystal growth. J Cryst Growth 417:58–64
Häßler C, Hofs HU, Koch W et al (2000) Formation and annihilation of oxygen donors in multicrystalline silicon for solar cells. Mater Sci Eng B Solid-State Mater Adv Technol 71:39–46. https://doi.org/10.1016/S0921-5107(99)00346-3
Lan CW, Hsu C, Nakajima K (2015) Multicrystalline Silicon Crystal Growth for Photovoltaic Applications. In: Handbook of crystal growth: bulk crystal growth. Elsevier, pp 373–411. https://doi.org/10.1016/B978-0-444-63303-3.00010-9
Giannattasio A, Senkader S, Azam S et al (2003) The use of numerical simulation to predict the unlocking stress of dislocations in Cz-silicon wafers. Microelectron Eng 70:125–130. https://doi.org/10.1016/S0167-9317(03)00434-9
Saitoh T, Hashigami H, Rein S, Glunz S (2000) Overview of light degradation research on crystalline silicon solar cells. Prog Photovolt Res Appl 8(5):537–547. https://doi.org/10.1002/1099-159X(200009/10)8:5%3C537::AID-PIP349%3E3.0.CO;2-W
Sekar S, Thamodharan K, Manikkam S, Nallusamy N, Perumalsamy R (2023) Numerical investigation of the effect of modified heat exchanger block on thermal stress and dislocation density of DS‐Grown mc‐Si Ingot. Cryst Res Technol 2200285. https://doi.org/10.1002/crat.202200285
Qi X, Liu L, Ma W (2017) Effects of furnace pressure on oxygen and carbon coupled transport in an industrial directional solidification furnace for crystalline silicon ingots. J Cryst Growth 468:933–938. https://doi.org/10.1016/j.jcrysgro.2016.10.027
Lindroos J, Savin H (2016) Review of light-induced degradation in crystalline silicon solar cells. Sol Energy Mater Sol Cells 147:115–126. https://doi.org/10.1016/j.solmat.2015.11.047
Pizzini S, Sandrinelli A, Beghi M et al (1988) Influence of Extended Defects and Native Impurities on the Electrical Properties of Directionally Solidified Polycrystalline Silicon. J Electrochem Soc 135:155–165. https://doi.org/10.1149/1.2095543
Bornside DE, Brown RA, Fujiwara T et al (1995) The Effects of Gas-Phase Convection on Carbon Contamination of Czochralski-Grown Silicon. J Electrochem Soc 142:2790–2804. https://doi.org/10.1149/1.2050094
Liu L, Nakano S, Kakimoto K (2008) Carbon concentration and particle precipitation during directional solidification of multicrystalline silicon for solar cells. J Cryst Growth 310:2192–2197. https://doi.org/10.1016/j.jcrysgro.2007.11.165
Sekar S, Gurusamy A, Manikkam S et al (2023) Improvement of DS Grown Mc-Si Ingot for PV Application by Reducing the Thickness of the Bottom Heat Exchanger Block: Numerical Investigation. SILICON 15:4183–4192. https://doi.org/10.1007/s12633-023-02350-5
Sekar S, Thamotharan K, Manickam S, Murugesan B, Kakimoto K, Perumalsamy R (2024) A critical review of the process and challenges of silicon crystal growth for photovoltaic applications. Cryst Res Technol 59(1):2300131
Kesavan V, Srinivasan M, Ramasamy P (2019) The Influence of Multiple-Heaters on the Reduction of Impurities in mc-Si for Directional Solidification. SILICON 11:1335–1344. https://doi.org/10.1007/s12633-018-9928-7
Bharathwaj M, Sugunraj S, Karuppasamy P et al (2023) Effect of argon flow rate on mc-Silicon Ingot Grown by DS process for PV application: a numerical investigation of non-metallic impurities. Silicon 15:5937–5946. https://doi.org/10.1007/s12633-023-02490-8
Sekar S, Manikkam S, Perumalsamy R (2023) Investigation of Solid-Liquid interface effects on the impurity concentration in the DS grown Mc-Si Ingot by using C-Clamp insulation block for solar cell applications: numerical analysis. SILICON. https://doi.org/10.1007/s12633-023-02839-z
Acknowledgements
This work is supported by the Department of Science and Technology, Government of India (Order No. DST/TMD/CERI/RES/2020/7 dated on 31/12/2020).
Funding
Not Applicable.
Author information
Authors and Affiliations
Contributions
Sugunraj Sekar—wrote the main manuscript.
Srinivasan Manikkam—reviewed the manuscript.
Ramasamy Perumalsamy—reviewed the manuscript.
Corresponding author
Ethics declarations
Compliance with Ethical Standards
This study involving human participants were in accordance with the ethical standards of the institutional and/or national research committee.
Consent to Participate
Informed consent was obtained from all individual participants included in the study.
Consent for Publication
Consent for publication was obtained from all individual participants included in the study.
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Sekar, S., Manikkam, S. & Perumalsamy, R. Numerical Investigation of Argon Gas Flow Patterns and Their Effects on Mc-Si Ingot Growth Process: Solar Cell Applications. Silicon 16, 3395–3404 (2024). https://doi.org/10.1007/s12633-024-02934-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-024-02934-9