Abstract
Shifting processes are analyzed for a pure electric vehicle equipped with a two-speed automated mechanical transmission without a clutch in order to study the relationship between shifting jerk, shifting time, and synchronizer tooth grinding. Results show that shifting time has a negative correlation with shifting jerk, which is related to the torque variation rates of the driving and shifting motors. Tooth grinding of the synchronizer is related to the relative speed between the synchronizer sleeve and lock ring during shifting processes. Based on the analysis, a shifting control strategy for pure electric vehicles is proposed in order to decrease shifting jerk, avoid tooth grinding of the synchronizer, and shorten shifting time. Experimental results obtained show that the proposed control strategy can achieve smooth, reliable, and quick shifts for an electric vehicle.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Chan, C.-C., Bouscayrol, A., and Chen, K., “Electric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling,” IEEE Transactions on Vehicular Technology, Vol. 59, No. 2, pp. 589–598, 2010.
Nguyen, N. T., Ho, H. V., Hong, S.-T., and Bien, F., “Smart in-Wheel Generator using Adaptive DC-DC Converter for Rechargeable Batteries in Electric Vehicles,” Int. J. Precis. Eng. Manfu., Vol. 15, No. 6, pp. 1009–1013, 2014.
Ehsani, M., Gao, Y., and Emadi, A., “Modern Electric, Hybrid Electric, and Fuel Cell Vehicles: Fundamentals, Theory, and Design,” CRC Press, 2nd Ed., 2009.
Qin, D.-T., Zhou, B.-H., Hu, M.-H., HU, J.-J., and Wang, X., “Parameters Design of Powertrain System of Electric Vehicle with Two-Speed Gearbox,” Journal of Chongqing University, Vol. 34, No. 1 pp. 1–6, 2011.
Xi, J.-Q., Xiong, G.-M., and Zhang, Y., “Application of Automatic Manual Transmission Technology in Pure Electric Bus,” Proc. of IEEE Vehicle Power and Propulsion Conference, pp. 1–4, 2008.
Ren, Q., Crolla, D. A., and Morris, A., “Effect of Transmission Design on Electric Vehicle (EV) Performance,” Proc. of IEEE Vehicle Power and Propulsion Conference, pp. 1260–1265, 2009.
Gao, B., Liang, Q., Xiang, Y., Guo, L., and Chen, H., “Gear Ratio Optimization and Shift Control of 2-Speed I-AMT in Electric Vehicle,” Mechanical Systems and Signal Processing, Vols. 50-51, pp. 615–631, 2015.
Sohn, I. and Kim, B., “Comparison Benefit of E-Transmission for NEV,” Int. J. Precis. Eng. Manuf., Vol. 15, No. 11, pp. 2465–2468, 2014.
Oh, J.-Y., Park, Y.-J., Lee, G.-H., and Song, C.-S., “Modeling and Validation of a Hydraulic Systems for an AMT,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 5, pp. 701–707, 2012.
Lucente, G., Montanari, M., and Rossi, C., “Modelling of an Automated Manual Transmission System,” Mechatronics, Vol. 17, No. 2–3, pp. 73–91, 2007.
Heath, R. P. G. and Child, A. J., Zeroshift. “A Seamless Automated Manual Transmission (AMT) with no Torque Interrupt,” SAE Technical Paper, No. 2007-01-1307, 2007.
Heath, R. P. G. and Child, A. J., “Zeroshift Automated Manual Transmission (AMT),” SAE Paper No. 2007-26-061, pp. 693–696, 2007.
Chen S, “Study on Parameter Matching and Intergrated Control Stragy for Pure Electrical Vehicle Driveline,” Ph.D. Thesis, College of Mechanical Engineering, Chongqing University, 2013.
Zhang J, “Study on the Shifting Control without Clutch Operation of Electrical Controlled and Electronic Powered AMT,” M.Sc. Thesis, Jilin University, 2007.
Chu M, “Study on the Electric Shifting of the AMT of Heavy-Duty Commercial Vehicle without the Disengagement of the Clutch,” M.Sc. Thesis, Jilin University, 2007.
Wang S, “Engine Control on the Automatic Mechanical Transmission of Non-Clutch Operating,” M.Sc. Thesis, Jilin University, 2007.
Kong, G., Zhong, Z., Yu, Z., and Chen, X., “Engine Control during Shifting Process of Automatic Mechanical Transmission Without Disengaging Clutch,” Journal of Tongji University. Natural Science, Vol. 40, No. 2, pp. 267–271, 2012.
Wang, Y., Xi, J., and Chen, H., “A Study on the Mechanism and Counter Measures for Shift-Impact in AMT,” Automotive Engineering, Vol. 31, No. 3, pp. 253–257, 2009.
Chen, Y., Liang, W., Xi, J., and Xu, C., “A Study on the Control Strategy for the Gear Shifting of AMT in a Electric Bus,” Automotive Engineering, Vol. 33, No. 5, pp. 405–410, 2011.
Zhang Y, Qin D, Mi C, Guo J, “Two-Gear Automatic Gearbox of Electric Automobile,” CN Patent, No. 102182798A, 2011.
Chen, J., “Automobile Construction (Lower Volumes),” Beijing: Machinery Industry Press, 2006.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qin, DT., Yao, MY., Chen, SJ. et al. Shifting process control for two-speed automated mechanical transmission of pure electric vehicles. Int. J. Precis. Eng. Manuf. 17, 623–629 (2016). https://doi.org/10.1007/s12541-016-0075-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-016-0075-z