Abstract
In this paper, we study the accumulated polymerization effect in the two-photon stereolithography process and its application. In the two-photon stereolithography process, less-polymerized material by insufficient dosing is generally removed by rinse material. The less-polymerized region of a voxel transforms into a fully-polymerized region in the voxel-by-voxel scanning process due to the accumulated dose. The parametric study of the accumulation effect for the widths of a voxel and a line pattern is investigated. Generally, accumulated polymerization from the scanning process has an influence on the increase of the pattern width smoothness of the space between each voxel. At a dose that is smaller than the dose generating a minimum size voxel, stochastic nano-patterns are generated by fitfully accumulated two-photon polymerization. Using the method of fitfully accumulated two-photon polymerization at a small dose, 3D micro-structures with nano-patterns are directly fabricated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Li, W., He, D., and Bai, J., “The Influence of Nano/Micro Hybrid Structure on the Mechanical and Self-Sensing Properties of Carbon Nanotube-Microparticle Reinforced Epoxy Matrix Composite,” Composites Part A: Applied Science and Manufacturing, Vol. 54, pp. 28–36, 2013.
Kang, M.-S., Joo, S.-J., Bahng, W., Lee, J.-H., Kim, N.-K., and Koo, S.-M., “Anti-Reflective Nano- and Micro-Structures on 4H-SiC for Photodiodes,” Nanoscale Research Letters, Vol. 6, No. 1, pp. 1–4, 2011.
Cha, T.-G., Yi, J. W., Moon, M.-W., Lee, K.-R., and Kim, H.-Y., “Nanoscale Patterning of Microtextured Surfaces to Control Superhydrophobic Robustness,” Langmuir, Vol. 26, No. 11, pp. 8319–8326, 2010.
Jo, H.-B., Choi, J., Byeon, K.-J., Choi, H.-J., and Lee, H., “Superhydrophobic and Superoleophobic Surfaces using ZnO Nanoin- Micro Hierarchical Structures,” Microelectronic Engineering, Vol. 116, pp. 51–57, 2014.
Lee, C. H., Jung, P. G., Lee, S. M., Park, S. H., Shin, B. S., et al., “Replication of Polyethylene Nano-Micro Hierarchical Structures using Ultrasonic Forming,” Journal of Micromechanics and Microengineering, Vol. 20, No. 3, Paper No. 035018, 2010.
Yang, D.-Y., Park, S. H., Lim, T. W., Kong, H.-J., Yi, S. W., et al., “Corrected Article: Ultraprecise Microreproduction of a Three-Dimensional Artistic Sculpture by Multipath Scanning Method in Two-Photon Photopolymerization,” Applied Physics Letters, Vol. 90, No. 7, Paper No. 079903, 2007.
Lim, T. W., Son, Y., Yang, D.-Y., Kong, H.-J., and Lee, K.-S., “Selective Ablation-Assisted Two-Photon Stereolithography for Effective Nano-and Microfabrication,” Applied Physics A, Vol. 103, No. 4, pp. 1111–1116, 2011.
Lim, T. W., Son, Y., Jeong, Y. J., Yang, D.-Y., Kong, H.-J., et al., “Three-Dimensionally Crossing Manifold Micro-Mixer for Fast Mixing in a Short Channel Length,” Lab on a Chip, Vol. 11, No. 1, pp. 100–103, 2011.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lim, T.W., Yang, DY. Direct fabrication of nano-wrinkled 3D microstructures using fitfully accumulated two-photon polymerization. Int. J. Precis. Eng. Manuf. 16, 2427–2431 (2015). https://doi.org/10.1007/s12541-015-0312-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-015-0312-x