Abstract
This paper presents a new framework based on optimal control to define new dynamic visual controllers to carry out the guidance of any serial link structure. The proposed general method employs optimal control to obtain the desired behaviour in the joint space based on an indicated cost function which determines how the control effort is distributed over the joints. The proposed approach allows the development of new direct visual controllers for any mechanical joint system with redundancy. Finally, authors show experimental results and verifications on a real robotic system for some derived controllers obtained from the control framework.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Andolfatto, L., Lavernhe, S., and Mayer, J. R. R., “Evaluation of Servo, Geometric and Dynamic Error Sources on Five-Axis High-Speed Machine Tool,” International Journal of Machine Tools and Manufacture, Vol. 51, No. 10, pp. 787–796, 2011.
Song, W., Wang, G., Xiao, J., Wang, G., and Hong, Y., “Research on Multi-Robot Open Architecture of an Intelligent CNC System based on Parameter-Driven Technology,” Robotics and Computer-Integrated Manufacturing, Vol. 28, No. 3, pp. 326–333, 2012.
Chaumette, F. and Hutchinson, S., “Visual Servo Control, Part I. Basic Approaches,” IEEE Robotics & Automation Magazine, Vol. 13, No. 4, pp. 82–90, 2006.
Pomares, J., Corrales, J. A., García, G. J., and Torres, F., “Direct Visual Servoing to Track Trajectories in Human-Robot Cooperation,” International Journal of Advanced Robotic Systems, Vol. 8, No. 4, pp. 129–138, 2011.
Khatib, O., “Dynamic Control of Manipulator in Operational Space,” Proc. of 6th IFTOMM World Congress on Theory of Machines and Mechanisms, pp. 1128–1131, 1983.
Xian, B., de Queiroz, M. S., Dawson, D., and Walker, I., “Task-Space Tracking Control of Redundant Robot Manipulators Via Quaternion Feedback,” Proc. of IEEE International Conference on Control Applications, pp. 363–368, 2001.
Zergeroglu, E., Dawson, D. M., Walker, I., and Behal, A., “Nonlinear Tracking Control of Kinematically Redundant Robot Manipulators,” Proc. of American Control Conference, Vol. 4, pp. 2513–2517, 2000.
Tatlicioglu, E., Braganza, D., Burg, T. C., and Dawson, D. M., “Adaptive Control of Redundant Robot Manipulators with Sub-Task Objectives,” Robotica, Vol. 27, No. 6, pp. 873–881, 2009.
Lin, C. J., “Motion Planning of Redundant Robots by Perturbation Method,” Mechatronics, Vol. 14, No. 3, pp. 281–297, 2004.
Nakanishi, J., Cory, R., Mistry, M., Peters, J., and Schaal, S., “Operational Space Control: A Theoretical and Empirical Comparison,” The International Journal of Robotics Research, Vol. 27, No. 6, pp. 737–757, 2008.
Kumar, N., Borm, J. H., Panwar, V., and Chai, J., “Tracking Control of Redundant Robot Manipulators using RBF Neural Network and an Adaptive Bound on Disturbances,” Int. J. Precis. Eng. Manuf., Vol. 13, No. 8, pp. 1377–1386, 2012.
Pomares, J., Perea, I., and Torres, F., “Dynamic Visual Servoing with Chaos Control for Redundant Robots,” IEEE/ASME Transactions on Mechatronics, Vol. 19, No. 2, pp. 423–431, 2014.
Udwadia, F. E., “A New Perspective on the Tracking Control of Nonlinear Structural and Mechanical Systems,” Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, Vol. 459, No. 2035, pp. 1783–1800, 2003.
Yoshikawa, T., “Manipulability of Robotic Mechanisms,” The International Journal of Robotics Research, Vol. 4, No. 2, pp. 3–9, 1985.
Park, J., Chung, W., and Youm, Y., “Computation of Gradient of Manipulability for Kinematically Redundant Manipulators Including Dual Manipulators System,” Transactions on Control, Automation and Systems Engineering, Vol. 1, No. 1, pp. 8–15, 1999.
Park, J., Chung, W., and Youm, Y., “Computation of Gradient of Manipulability for Kinematically Redundant Manipulators Including Dual Manipulators System,” Transactions on Control, Automation and Systems Engineering, Vol. 1, No. 1, pp. 8–15, 1999.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pomares, J., Jara, C.A., Pérez, J. et al. Direct visual servoing framework based on optimal control for redundant joint structures. Int. J. Precis. Eng. Manuf. 16, 267–274 (2015). https://doi.org/10.1007/s12541-015-0035-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-015-0035-z