Abstract
We present an experimental study of the kinematics of Twist Extrusion (TE) and show that TE has the following properties. As in ECAP, the mode of deformation in twist extrusion is simple shear. Unlike in ECAP, there are two shear planes; one of them is perpendicular and the other is parallel to the specimen axis. The following processes are present during twist extrusion: vortex-like flow with large strain gradient, stretching and mixing of metal particles. Twist extrusion opens new technological possibilities, e.g., decreased metal waster compared to ECAP, obtaining profile hollow specimens.
Article PDF
Avoid common mistakes on your manuscript.
REFERENCES
R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer and Y.T. Zhu, Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation. JOM 58(4) (2006) 33–39
Y.E. Beygelzimer, V.N. Varyukhin, S.G. Synkov, A.N. Sapronov, V.G. Synkov, New Schemes of Accumulation of Large Plastic Deformation. Fiz. Tekh. Vys. Dav. Vol. 14, 3 (1999) 109–111 [in russian].
Y. Beygelzimer, D. Orlov, and V. Varyukhin, New Severe Plastic Deformation Method: Twist Extrusion. In: Proc. Second Int. Symp. on Ultrafine Grained Materials, The Minerals, Metals, and Materials Society, eds. Y.T. Zhu et al., Warrendale, PA (2002) 297–301.
Y. Beygelzimer, V. Varyukhin, D. Orlov and S. Synkov: Twist extrusion process for strain accumulation, TEAN, Donetsk (2003) [in russian].
Y. Beygelzimer, D. Orlov, A. Korshunov, S.Synkov, V. Varyukhin, I.Vedernikova, A. Reshetov, A.Synkov, L.Polyakov and I.Korotchenkova, Features of Twist Extrusion: Method, Structures and Material Properties. Solid State Phenomena, 114 (2006) 69–78
A.P. Shpak, V.N. Varyukhin, V.I. Tkatch V.V. Maslov, Y.Y. Beygelzimer,S.G. Synkov, V.K. Nosenko and S.G. Rassolov, Nanostructured Al86Gd6Ni6Co2 bulk alloy produced by twist extrusion of amorphous melt-spun ribbons. Materials Science and Engineering A 425 (2006) 172–177
V. Varyukhin, Y. Beygelzimer, S. Synkov and D. Orlov, Application of Twist Extrusion. Materials Science Forum 503–504 (2006) 335–339
V.V.Stolyarov, Y.E. Beigel'zimer, D.V.Orlov and R.Z. Valiev, Refinement of Microstructure and Mechanical Properties of Titanium Processed by Twist Extrusion and Subsequent Rolling. The Physics of Metals and Metallography, 99, 2 (2005 204–211.
D. Orlov, A. Reshetov, A. Synkov, V. Varyukhin, D.Lotsko, O. Sirko, N. Zakharova, A. Sharovsky, V. Voropaiev, Yu. Milman and S. Synkov, Twist Extrusion as a Tool for Grain Refinement in Al-Mg-Sc-Zr Alloys. In: Nanostructured Materials by Severe Plastic Deformation, eds. Y. T.Zhu and V.Varyukhin. Springer, (2006) 77–81
M.Berta, D.Orlov and P.Prangnell, Grain refinement response during twist extrusion of an Al-0.13% Mg alloy. International Journal of Materials Research (Zeitschrift fur Metallkunde), 98, 3 (2007) 200–204.
S. V. Dobatkin, A.A.Kuznetsov, G.A.Salishchev, Y.Y.Beygelzimer and D.V.Orlov, Submicrocrystalline structure of oxygen-free copper after different methods of severe plastic deformation. Metalurgija, 45, 3 (2006) 245–251.
P. W. Bridgman, Studies in Large Plastic Flow and Fracture, with Special Emphasis on the Effects of Hydrostatic Pressure, Harvard (1952)
Y. Beygelzimer: Grain refinement versus voids accumulation during severe plastic deformations of polycrystals: mathematical simulation. Mechanics of Materials 37 (2005) 753–767
J. M. Ottino, The Kinematics of Mixing: Stretching, Chaos, and Transport, Cambridge and New York, Cambridge University Press (1989)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Beygelzimer, Y., Varyukhin, V. & Synkov, S. Shears, Vortices, and Mixing During Twist Extrusion. Int J Mater Form 1 (Suppl 1), 443–446 (2008). https://doi.org/10.1007/s12289-008-0090-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-008-0090-4