Abstract
During the deep drawing process the deformation history is different as compared to the tensile one where the constitutive equation can be identified only for small values of the plastic strain. More accurate values of the constitutive parameters can be obtained using the Erichsen drawing test. In this work we propose to use the inverse analysis principle to identify the rheological parameters directly from the Erichsen test. Results obtained for classical steel will be analyzed using an identification numerical high board (OPTPAR) automatically coupled with a commercial finite element code charged to simulate numerically the experimental test. Application to a DC03 sheet steel alloy will be presented.
Article PDF
Avoid common mistakes on your manuscript.
REFERENCES
V. Paunoiu, D. Nicoara: “Tehnologii de presare la rece a tablelor”, eds Cartea Universitara, Bucuresti, 2004.
Jean-Louis Batoz, Hakim Naceur, Ying-Qiao Guo: “Sheet metal stamping analysis and process design based on the inverse approach”, 10th Esaform conference on material forming, Zaragozza, Spain, 2007, edited by e. cueto and f. chinesta, (2007) 1448–1453.
H. Naceur, A. Delameziere, J. L. Batoz, Y. Q. Guo, C. Knopf-Lenoir: “Some improvements on the optimum process design in deep drawing using the inverse approach", J. of materials processing technology, vol.145, issue2, (2004) 250–262.
R. J. Comstock, K. Li, R. H. Wagoner: “Simulation of axisymmetric sheet forming tests”, Journal of materials processing technology, vol. 117, no. 1, (2001) 153–168.
W. G. Granzou, “Sheet formability of steels”, ASM international, metals handbook. tenth eds. vol. 1. properties and selection: irons, steels, and highperformance alloys, 1990.
D. Banabic: “Formability of metallic materials (plastic anisotropy, Formability testing and Forming limits)”, eds Springer Verlag, Heidelberg, 2000.
K. Lange: “ Handbook of metal forming”, eds Mcgraw-Hill, New York, 1976.
A. Gavrus: “Identification des parametres rheologiques par analyse inverse", Phd thesis, eds Ecole des Mines de Paris, 1997.
A. Gavrus, E. Massoni, J. L. Chenot - “The rheological parameter identification formulated as an inverse problem”, Inverse problems in engineering, vol. 7, (1999) 1–41
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gavrus, A., Banu, M., Ragneau, E. et al. An inverse analysis approach of the Erichsen test starting from a finite element model. Int J Mater Form 1 (Suppl 1), 5–8 (2008). https://doi.org/10.1007/s12289-008-0058-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-008-0058-4