Abstract
Aiming at the complex fault signal components and difficulty in identifying the fault features of a hoist spindle device, this study proposes a method based on a filtering algorithm, Hilbert-Huang transform (HHT), energy entropy, and support vector machines (SVM). The filtering method is applied to the vibration signal under different fault conditions. Then, the Hilbert-Huang transform is applied to the noise-reduced signal. The empirical mode decomposition (EMD) method decomposes the noise-reduced vibration signal into a set of intrinsic mode functions (IMF). Then, the Hilbert transform (HT) calculates the envelope spectrum of the first few IMFs. Afterward, it evaluates and extracts the fault characteristic frequencies. Finally, the identification of different fault defect types is determined by combining the intrinsic modal energy entropy and SVM. The experimental results show that the method can accurately identify the faults in the rotor bearing system and is an effective fault signal processing method.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. L. Li, S. Jiang, M. H. Li and J. C. Xie, A fault diagnosis method of mine hoist disc brake system based on machine learning, Applied Sciences, 10(5) (2020) 1768.
C. Tang, G. Zhou, Z. Gao, X. Shu and P. Chen, A novel rail inspection robot and fault detection method for the coal mine hoisting system, Intelligent Transportation Systems Magazine IEEE, 11(2) (2019) 110–121.
X. J. Chen, Y. M. Yang, Z. X. Cui and J. Shen, Vibration fault diagnosis of wind turbines based on variational mode decomposition and energy entropy, Energy, 174 (2019) 1100–1109.
H. K. Li, Z. X. Zhang, Z. G. Guo, S. Zou and F. T. Wang, Rolling bearing fault diagnosis using Hough transform of time-frequency image, Journal of Vibration, Measurement and Diagnosis, 30(6) (2010) 634–637.
W. Bartelmus and R. Zimroz, A new feature for monitoring the condition of gear boxes in non-stationary operating conditions, Mechanical Systems and Signal Processing, 23(5) (2009) 1528–1534.
W. Zeng, J. Yuan, C. Yuan, Q. Wang and Y. Wang, A new approach for the detection of abnormal heart sound signals using TQWT, VMD and neural networks, Artificial Intelligence Review, 6(54) (2020) 1613–1647.
V. K. Rai and A. R. Mohanty, Bearing fault diagnosis using FFT of intrinsic mode functions in Hilbert-Huang transform, Mechanical Systems and Signal Processing, 21(6) (2007) 2607–2615.
P. Tse, W. X. Yang and H. Y. Tam, Machine fault diagnosis through an effective exact wavelet analysis, Journal of Sound and Vibration, 277 (2004) 1005–1024.
N. E. Huang et al., The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proceedings of the Royal Society, 454 (1998) 903–995.
Y. G. Lei, Z. J. He and Y. Y. Zi, EEMD method and WNN for fault diagnosis of locomotive roller bearings, Expert Systems with Applications, 38(6) (2011) 7334–7341.
P. M. Shi, S. J. An, P. Li and D. Y. Han, Signal feature extraction based on cascaded multi-stable stochastic resonance denoising and EMD method, Measurement, 90 (2016) 318–328.
F. T. Wang, C. X. Liu, W. S. Su, Z. G. Xue, Q. K. Han and H. K. Li, Combined failure diagnosis of slewing bearings based on MCKD-CEEMD-CEEMD-ApEn, Shock and Vibration, 2018 (2018) 1–13.
A. B. Ming, W. Zhang, Z. Y. Qin and F. L. Chu, Envelope calculation of the multi-component signal and its application to the deterministic component cancellation in bearing fault diagnosis, Mechanical Systems and Signal Processing, 50–51 (2015) 70–100.
Y. G. Lei, J. Lin, Z. J. He and M. J. Zuo, A review on empirical mode decomposition in fault diagnosis of rotating machinery, Mechanical Systems and Signal Processing, 35(1–2) (2013) 108–126.
C. Cortes and V. Vapnik, Support vector networks, Machine Learning, 20(3) (1995) 273–297.
Y. Fan, C. Zhang, Y. Xue, J. Wang and F. Gu, A bearing fault diagnosis using a support vector machine optimised by the self-regulating particle swarm, Shock and Vibration, 2020(5) (2020) 1–11.
J. Q. Zhang, J. Zhang, M. Zhong, J. D. Zheng and L. G. Yao, A GOA-MSVM based strategy to achieve high fault identification accuracy for rotating machinery under different load conditions, Measurement, 163 (2020) 108067.
Y. J. Niu, J. Y. Fei, Y. Y. Li and D. Wu, A novel fault diagnosis method based on EMD, cyclostationary, SK and TPTSR, Journal of Mechanical Science and Technology, 34(5) (2020) 1925–1935.
D. Y. Han, N. Zhao and P. M. Shi, Gear fault feature extraction and diagnosis method under different load excitation based on EMD, PSO-SVM and fractal box dimension, Journal of Mechanical Science and Technology, 33(2) (2019) 487–494.
T. Guo and Z. M. Deng, An improved EMD method based on the multi-objective optimization and its application to fault feature extraction of rolling bearing, Applied Acoustics, 127 (2017) 46–62.
M. C. Pan and W. C. Tsao, Using appropriate IMFs for envelope analysis in multiple fault diagnosis of ball bearings, International Journal of Mechanical Sciences, 69 (2013) 114–124.
Z. L. Mou, X. B. Niu and C. Wang, A precise feature extraction method for shock wave signal with improved CEEMD-HHT, Journal of Ambient Intelligence and Humanized Computing, 2020 (3) (2020).
J. B. Ali, N. Fnaiech, L. Saidi, B. C. Morello and F. Fnaiech, Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals, Applied Acoustics, 89 (2015) 16–27.
Y. Yu, D. J. Yu and J. S. Cheng, A roller bearing fault diagnosis method based on EMD energy entropy and ANN, Journal of Sound and Vibration, 294(1–2) (2006) 269–277.
Y. Zheng, J. Yue, X. F. Sun and J. Chen, Studies of filtering effect on internal solitary wave flow field data in the South China Sea using EMD, Advanced Materials Research, 518–523 (2012) 1422–1425.
V. K. Rai and A. R. Mohanty, Bearing fault diagnosis using FFT of intrinsic mode functions in Hilbert-Huang transform, Mechanical Systems and Signal Processing, 21(6) (2007) 2607–2615.
W. S. Su, F. T. Wang, Z. X. Zhang, Z. G. Guo and H. K. Li, Application of EMD denoising and spectral kurtosis in early fault diagnosis of rolling element bearings, Journal of Vibration and Shock, 22(1) (2010) 3537–3540.
H. Li, T. Liu, X. Wu and Q. Chen, Research on bearing fault feature extraction based on singular value decomposition and optimized frequency band entropy, Mechanical Systems and Signal Processing, 118 (2019) 477–502.
Acknowledgments
The authors thanked all those who helped them in writing this thesis. The research was supported by the National Key Research and Development Program (2017YFF0210604), the National Natural Science Foundation of China (No.51975572), the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions (TAPP), the Project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD).
Author information
Authors and Affiliations
Corresponding author
Additional information
Jun Gu is currently pursuing the Doctorate degree in Mechatronic Engineering in China University of Mining and Technology, Xuzhou, China. His current research interests include fault diagnosis and monitoring, signal processing.
Rights and permissions
About this article
Cite this article
Gu, J., Peng, Y., Lu, H. et al. Compound fault diagnosis and identification of hoist spindle device based on hilbert huang and energy entropy. J Mech Sci Technol 35, 4281–4290 (2021). https://doi.org/10.1007/s12206-021-0901-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-021-0901-9