Abstract
The surface integrity of aero-engine blades directly affects its mechanical behavior. To improve the surface integrity and address the problem, that is, the blade is mainly polished manually, a flexible polishing process was proposed and surface integrity was investigated. First, flexible polishing technology and the machine tool that the authors researched and developed were introduced. Second, a polishing experiment was conducted on a TC4 titanium alloy blade. Finally, the surface integrity before and after polishing was measured and the results were compared and analyzed. Results showed that the knife marks, pits, unevenness, and other defects of the blade surface were effectively removed through flexible polishing; the surface residual compressive stress was reduced from 483 MPa to 397 MPa; the surface roughness was reduced to Ra 0.4 μm; the surface micro-hardness increased by 18 HV; and the surface metamorphic layer caused by milling was removed. Flexible polishing effectively improved the surface quality without affecting the depth layer quality of the workpiece.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D. A. Axinte, M. Kritmanorot, M. Axinte and N. N. Z Gindy, Investigations on belt polishing of heat-resistant titanium alloys, Journal of Materials Processing Technology, 166 (3) (2005) 398–404.
D. A. Axinte, J. Kwong and M. C. Kong, Workpiece surface integrity of Ti-6-4 heat-resistant alloy when employing different polishing methods, Journal of Materials Processing Technology, 209 (4) (2009) 1843–1852.
J. Rech, G. Kermouche, C. Claudin, A. Khellouki and W. Grzesik, Modelling of the residual stresses induced by belt finishing on a AISI52100 hardened steel, International Journal of Material Forming, 208 (1) (2008) 567–570.
H. Tam and H. Cheng, An investigation of the effects of the tool path on the removal of material in polishing, Journal of Materials Processing Technology, 210 (5) (2010) 807–818.
T. C. Hung, S. H. Chang and C. C. Lin, Effects of abrasive particle size and tool surface irregularities on wear rates of work and tool in polishing processes, Microelectronic Engineering, 88 (9) (2011) 2981–2990.
E. S. Lee, S. G. Lee, W. K. Choi and S. G. Choi, Study on the effect of various machining speeds on the wafer polishing process, Journal of Mechanical Science and Technology, 27 (10) (2013) 3155–3160.
A. Jourani, M. Dursapt, H. Hamdi, J. Rach and H. Zahouani, Effect of the belt grinding on the surface texture: Modeling of the contact and abrasive wear, Wear, 259 (2005) 1137–1143.
E. Brinksmeier, O. Riemer and A. Gessenharter, Finishing of structured surfaces by abrasive polishing, Precision Engineering, 30 (2006) 325–336.
M. Bigerelle, D. Najjar and A. Iost, Multiscale functional analysis of wear: A fractal model of the grinding process, Wear, 258 (2005) 232–239.
M. Bigerelle, A. Gautier, B. Hagege, J. Favergeon and B. Bounichane, Roughness characteristic length scales of belt finished surface, Journal of Materials Processing Technology, 209 (2009) 6103–6116.
M. Bigerelle, A. Gautier and A. Iost, Roughness characteristic length scales of micro-machined surfaces: A multi-scale modeling, Sensors & Actuators B Chemical, 126 (2007) 126–137.
M. Bigerelle, B. Hagege and M. E. Mansori, Mechanical modelling of micro-scale abrasion in super finish belt grinding, Tribology International, 41 (2008) 992–1001.
H. Hamdi, H. Zahouani and J. M. Bergheau, Residual stresses computation in a grinding process, Journal of Materials Processing Technology, 147 (2004) 277–285.
J. Yang, M. Odén, M. P. Johansson-Jõesaar and L. Llanes, Grinding effects on surface integrity and mechanical strength of WC-Co cemented carbides, Procedia CIRP, 13 (2014) 257–263.
W. H. Ho, J. T. Tsai, B. T. Lin and J. H. Chou, Adaptive network-based fuzzy inference system for prediction of surface roughness in end milling process using hybrid Taguchigenetic learning algorithm, Expert Systems with Applications, 36 (2) (2009) 3216–3222.
X. Han, Investigation of the surface generation mechanism of mechanical polishing engineering ceramics using discrete element method, Applied Physics A, 116 (4) (2014) 1729–1739.
S. Gierlings, F. Klocke, M. Brockmann and D. Veselovac, Force-based temperature modeling for surface integrity prediction in broaching nickel-based alloys, CIRP Conference on Surface Integrity, 13 (2014) 314–319.
Y. Huang, C. Q. Yang and Z. Huang, Experimental research on abrasive belt grinding for 304 stainless streel, The Chinese Mechanical Engineering, 22 (3) (2011) 291–295.
S. M. Ji, M. S. Jin and X. Zhang, Novel gasbag polishing technique for free-form mold, Chinese, Journal of Mechanical Engineering, 43 (8) (2007) 2–6.
L. W. Guo, L. G. Yang and Y. Chen, Influence of magnetic abrasive finishing technology on surface integrity of vaneintegrated disk, China Surface Engineering, 26 (3) (2013) 0010–0015.
X. C. Huang, D. H. Zhang, C. F. Yang and J. X. Ren, Effect of grinding parameters on surface integrity of GH4169 nickel-based spirally, Journal of Aerospace Power, 23 (3) (2013) 621–628.
C. Yao, W. Zuo, D. Wu, J. Ren and D. Zhang, Control rules of surface integrity and formation of metamorphic layer in high-speed milling of 7055 aluminum alloy, Journal of Engineering Manufacture, 229 (2) (2015) 187–204.
X. J. Lin, Y. Yang, G. Yang, Y. Gao, Y. Chen, M. Li and J. X. Liu, The research of flexible polishing technology of fiveaxis NC abrasive belt for blade surface, Acta Aeronautical et Astronautical Sonica, 36 (6) (2015) 2074–2082.
J. H. Duan, Y. Y. Shi, J. F. Zhang, T. Dong and X. B. Li, Flexible polishing technology for blade of aviation engine, Acta Aeronautical et Astronautical Sonica, 33 (3) (2012) 573–578.
Author information
Authors and Affiliations
Corresponding author
Additional information
Xiaojun Lin is a Professor of Northwestern Polytechnical University, Xi’an, China. His research fields mainly include CAD/CAM and automation, highefficiency NC machining, and adaptive polishing technologies for complex surfaces.
Dongbo Wu is currently studying in Northwestern Polytechnical University, Xi’an, China. His research fields mainly include CAD/CAM and automation, high-efficiency NC machining, and adaptive polishing technologies for complex surfaces.
Rights and permissions
About this article
Cite this article
Lin, X., Wu, D., Shan, X. et al. Flexible CNC polishing process and surface integrity of blades. J Mech Sci Technol 32, 2735–2746 (2018). https://doi.org/10.1007/s12206-018-0530-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-0530-0