Abstract
The importance of using Agriculture unmanned helicopters (AUHs), especially for spraying pesticides and fertilizers on any terrain type to ensure crop yields, has been recently acknowledged. Apart from flying these helicopters at a super-low altitude and low speed, using an efficient and optimum rotor blade ensures a uniform and deep penetration of pesticide and fertilizers over a specified area. Accordingly, this work attempts to optimize the rotor blade of an AUH by using coupling statistics and several numerical techniques, including design of experiments, response surface method, and computational fluid dynamics. The experiments are designed using the central composite design method and by selecting the geometric variables that affect the aerodynamic performance of the rotor blade, including the root chord, tip chord, and angle of attack. The angle at the root and tip is optimized in order for the resulting twist to produce a uniform blade loading, achieve maximum lift, and minimize the required hover power. The required aerodynamic forces and limited availability of engine power are identified as constraints. The blade is optimized only when the helicopter is hovering at a persistent rotational speed, and the hover efficiency of the rotor blade with an optimal twist distribution is significantly higher than the baseline.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. C. Amsden, The use of helicopter in agriculture, Outlook on Agriculture, 15 (1986) 61–64.
J. Zhou, L. R. Khot, T. Peters, M. D. Whiting, Q. Zhang and D. Granatstein, Efficacy of unmanned helicopter in rainwater removal from cherry canopies, Computers and Electronics in Agriculture, 124 (2016) 161–167.
C. Zhang and J. Kovacs, The application of small unmanned aerial systems for precision agriculture: A review, Precision Agriculture, 13 (2012) 693–712.
Y. M. Koo, C. S. Lee, T. S. Soek, S. K. Shin, T. G. Kang, S. H. Kim and T. Y. Choi, Aerial application using a small RF controlled helicopter (I)-status and cost analysis, Journal of Biosystems Engineering, 31 (2006) 95–101.
T. Meng, Exploration and practice for the agricultural value of unmanned helicopters, Electronics, Information Technology and Intellectualization (2015) 191–194.
H. M. Adelman and W. R. Mantay, Integrated multidisciplinary optimization of rotorcraft: A plan for development, Technical Report NASA-TM-101617, NASA (1989).
M. Imiela, High-fidelity optimization framework for helicopter rotors, Journal of Aerospace Science and Technology, 23 (2012) 2–16.
K. K. Saijal and R. Ganguli, Optimization of helicopter rotor using polynomial and neural network metamodels, Journal of Aircraft, 48 (2011) 553–566.
H. Sun and S. Lee, Response surface approach to aerodynamic optimization design of helicopter rotor blade, International Journal for Numerical Methods in Engineering, 64 (2005) 125–142.
H. Sun, Wind turbine airfoil design using response surface method, Journal of Mechanical Science and Technology, 25 (2011) 1335–1340.
E. Adeeb, A. Maqsood, A. Musthaq and C. H. Sohn, Parametric study and optimization of ceiling fan blades for improved aerodynamic performance, Journal of Applied Fluid Mechanics, 9 (2016) 2905–2916.
R. H. Myers and D. C. Montgomery, Response surface methodology: Process and product optimization using designed experiments, Wiley, New York (1995).
Y. M. Koo, T. S. Soek, S. K. Shin, C. S. Lee and T. G. Kang, Aerial application using a small RF controlled helicopter (III)-lift test and rotor system, Journal of Biosystems Engineering, 31 (2006) 182–187.
Y. M. Koo, Development of essential mechanical elements for unmanned agricultural helicopter with payload of 20 kg, Final Report for IUPL of SMBA, MOCIE, Daegu, Korea (2009).
Y. M. Koo, Performance comparison of two airfoil rotor designs for an agricultural unmanned helicopter, Journal of Biosystems Engineering, 37 (2012).
B. A. Haider, C. H. Sohn, Y. S. Won and Y. M. Koo, Aerodynamically efficient rotor design for hovering agricultural unmanned helicopter, Journal of Applied Fluid Mechanics, 10 (2017).
Ansys Fluent Release 16.2, ANSYS® Academic Research, Help System, Fluent Theory and User’s Guide, ANSYS Inc (2016).
F. Caradonna and C. Tung, Experimental and analytical studies of a model helicopter rotor in hover, Technical Report NASA-TM-81232, NASA (1981).
B. E. Lee, Y. S. Byun, J. Kim and B. S. Kang, Experimental performance evaluation on a small-scale rotor using a rotor test stand, The Journal of Mechanical Science and Technology, 25 (2011) 1449–1456.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Recommended by Associate Editor Kyu Hong Kim
Basharat Ali Haider received his M.Sc. in Mechanical Engineering from the University of Belgrade, Serbia in 2009. He is currently a Ph.D. student at Kyungpook National University, Daegu, South Korea. His research interests include computational fluid dynamics, aerodynamic design and optimization, immersed boundary method, lattice Boltzmann method, and fluid-structure interaction.
Chang Hyun Sohn received his M.Sc. and Ph.D. in Mechanical Engineering from KAIST in 1985 and 1991, respectively. He worked in ADD for three years and as a Visiting Assistant Professor in the University of Cambridge in 1996. Dr. Sohn is currently a Professor at the Department of Mechanical Engineering at Kyungpook National University, Daegu, South Korea. His research interests include computational fluid dynamics, particle image velocimetry, flow induced vibration, and thermal hydraulics.
Yong Sik Won received his B.Sc. in Bio-industrial Machinery Engineering from Kyungpook National University, Daegu, South Korea. He is currently a master student in Bio-Industrial Machinery Engineering at Kyungpook National University, Daegu, South Korea. His research interests include computational fluid dynamics and helicopter rotor blade design.
Young Mo Koo received his M.Sc. in Bio & Agricultural Engineering from Rutgers, The State University of New Jersey, USA. He then received his Ph.D. in Agricultural Engineering from Kansas State University, USA. Dr. Koo is currently a Professor at the Department of Bio-Industrial Machinery Engineering at Kyungpook National University, Daegu, South Korea. His research interests include computational fluid dynamics and aerial application technology.
Rights and permissions
About this article
Cite this article
Haider, B.A., Sohn, C.H., Won, Y.S. et al. Aerodynamic performance optimization for the rotor design of a hovering agricultural unmanned helicopter. J Mech Sci Technol 31, 4221–4226 (2017). https://doi.org/10.1007/s12206-017-0820-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-017-0820-y