Abstract
This paper introduces a 2-D enriched Petrov-Galerkin natural element method (enriched PG-NEM) for the reliable crack analysis. The total displacement is expressed as a linear combination of usual non-singular displacement field and the near-tip singular one. The former is approximated in terms of Laplace interpolation functions, and its strain and stress distributions are smoothened by the patch recovery technique. The unknown coefficients of the latter are determined by a coupled PG-NEM, and its strain and stress distributions are smoothened by the patch recovery technique. The validity of present method is justified through the evaluation of crack-tip stress distributions and the stress intensity factors (SIFs) through two numerical examples. It has been found that the proposed method effectively and successfully captures the near-tip stress singularity with the reasonable accuracy, even with the remarkably coarse grid, when compared with an extremely fine grid and the analytical and numerical reference solutions.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Change history
05 March 2020
This erratum is to notify a mismatch of DOIs between the items uploaded in Springer web page and the final manuscripts published in Volume 24, Issue 2 (Feb. 2020). Due to a technical error, incorrect DOIs were used in the Springer web page. The DOIs in the published issue are correct.
References
Anderson TL (1991) Fracture mechanics: Fundamentals and applications, 1st edition. CRC Press, Boca Raton, FL, USA
Asareh I, Kim TY, Song JH (2018) A linear complete extended finite element method for dynamic fracture simulation with non-nodal enrichments. Finite Elements in Analysis and Design 152:27–45, DOI: https://doi.org/10.1016/j.finel.2018.09.002
ASTM (1965) Fracture toughness testing and its applications. American Society for Testing and Materials, West Conshohocken, PA, USA 381:43–51
Belinha J, Azevedo JMC, Dinis L, Natal Jorge, RM (2016) The natural neighbor radial point interpolation method extended to the crack growth simulation. International Journal of Applied Mechanics 8(1):1650006, DOI: https://doi.org/10.1142/S175882511650006X
Benzley SE (1976) Representation of singularities with isoparametric finite elements. International Journal for Numerical Methods in Engineering 10:1249–1259, DOI: https://doi.org/10.1002/nme.1620080310
Broek D (1982) Elementary engineering fracture mechanics. Martinus Nijhoff Publishers, London, UK
Ching HK, Batra RC (2001) Determination of crack tip fields in linear elastostatics by the meshless local Petrov-Galerkin (MLPG) method. Computer Modeling in Engineering and Science 2(2): 273–289
Cho JR (2016) Stress recovery techniques for natural element method in 2-D solid mechanics. Journal of Mechanical Science and Technology 30(11):5083–5091, DOI: https://doi.org/10.1007/s12206-016-1026-4
Cho JR (2019) Computation of mixed-mode stress intensity factors in functionally graded materials by natural element method. Steel and Composite Structures 31(1):43–51, DOI: https://doi.org/10.12989/scs.2019.31.1.043
Cho JR, Lee HW (2006) A Petrov-Galerkin natural element method securing the numerical integration accuracy. Journal of Mechanical Science and Technology 20(1):94–109, DOI: https://doi.org/10.1007/BF0291620
Cho JR, Lee HW (2014) Calculation of stress intensity factors in 2-D linear fracture mechanics by Petrov-Galerkin natural element method. International Journal for Numerical Methods in Engineering 98(11): 819–839, DOI: https://doi.org/10.1002/nme.4666
Chow WT, Atluri SN (1995) Finite element calculation of stress intensity factors for interfacial crack using virtual crack closure integral. Computational Mechanics 16(6):417–425, DOI: https://doi.org/10.1007/BF00370563
Erdogan F, Wu BT (1997) The surface crack problem for a plate with functionally graded properties. ASME Journal of Applied Mechanics 64:449–456, DOI: https://doi.org/10.1115/1.2788914
Fleming M, Chu YA, Moran B, Belytschko T (1997) Enriched elementfree Galerkin methods for crack tip fields. International Journal for Numerical Methods in Engineering 40:1483–1504, DOI: https://doi.org/10.1002/(SICI)1097-0207(19970430)40:8<1483::AID-NME123>3.0.CO;2-6
Gifford LN, Hilton PD (1978) Stress intensity factors by enriched finite elements. Engineering Fracture Mechanics 10(3):485–496, DOI: https://doi.org/10.1016/0013-7944(78)90059-0
Irwin GR (1957) Analysis of stresses and strains near the end of a crack traveling a plate. Journal of Applied Mechanics 24:361–364
Kim JH, Paulino GH (2002) Finite element evaluation of mixed mode stress intensity factors in functionally graded materials. International Journal for Numerical Methods in Engineering 53:1903–1935, DOI: https://doi.org/10.1002/nme.364
Labibzadeh M, Tabatabaei SMJH, Ghafouri HR (2018) An efficient element free method for stress field assessment in 2D linear elastic cracked domains. Computational and Applied Mathematics 37(5): 6719–6737, DOI: https://doi.org/10.1007/s40314-018-0710-7
Moës N, Dolbow J, Belytschko T (1999) A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering 46:131–150, DOI: https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J
Needleman A, Tvergaard V (1994) Mesh effects in the analysis of dynamic ductile crack growth. Engineering Fracture Mechanics 47(1):75–91, DOI: https://doi.org/10.1016/0013-7944(94)90239-9
Rao BN, Rahman S (2003) Mesh-free analysis of cracks in isotropic functionally graded materials. Engineering Fracture Mechanics 70:1–27, DOI: https://doi.org/10.1016/S0013-7944(02)00038-3
Ryicki EF, Kanninen MF (1977) A finite element calculation of stress intensity factors by a modified crack closure integral. Engineering Fracture Mechanics 9(4):931–938, DOI: https://doi.org/10.1016/0013-7944(77)90013-3
Scheel J, Ricoeur A, Krupka M (2019) Calculation of stress intensity factors with an analytical enrichment of the modified crack closure integral. Procedia Structural Integrity 18:268–273, DOI: https://doi.org/10.1016/j.prostr.2019.08.163
Sukumar N, Moran B (1999) C natural neighbor interpolant for partial differential equations. Numerical Methods in Partial Differential Equations 15:417–447, DOI: https://doi.org/10.1002/(SICI)1098-2426(199907)15:4<417::AID-NUM2>3.0.CO;2-S
Sukumar N, Moran A, Belytschko T (1998) The natural element method in solid mechanics. International Journal for Numerical Methods in Engineering 43:839–887, DOI: https://doi.org/10.1002/(SICI)1097-0207(19981115)43:5<839::AID-NME423>3.0.CO;2-R
Szabó B, Babuška I (1991) Finite element analysis. John Wiley & Sons, New York, NY, USA
Tracey D (1971) Finite elements for determination of crack tip elastic stress intensity factors. Engineering Fracture Mechanics 3(3):255–265, DOI: https://doi.org/10.1016/0013-7944(71)90036-1
Yau JF, Wang SS, Cortern HT (1980) A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity. Journal of Applied Mechanics 47:335–341, DOI: https://doi.org/10.1115/1.3153665
Zienkiewicz OC, Zhu JZ, Gong NG (1989) Effective and practical h-p-version adaptive analysis procedure for the finite element method. International Journal for Numerical Methods in Engineering 28(4):879–891, DOI: https://doi.org/10.1002/nme.1620280411
Acknowledgements
This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education (Grant No. NRF-2017R1D1A1B03028879). This work was supported by 2019 Hongik University Research Fund.
Author information
Authors and Affiliations
Corresponding author
Additional information
A correction to this article is available at https://doi.org/10.1007/s12205-020-2402-2
Rights and permissions
About this article
Cite this article
Cho, JR. 2-D Reliable Crack Analysis by Enriched Petrov-Galerkin Natural Element Method. KSCE J Civ Eng 24, 561–568 (2020). https://doi.org/10.1007/s12205-019-0978-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-019-0978-1