Abstract
The first large scale geotechnical centrifuge in Korea has recently been developed at KAIST under the Korea Construction Engineering Development (KOCED) Collaboratory program. A 5 m platform radius, 240 g-tons state-of-the-art geotechnical centrifuge has been installed in a new facility. The centrifuge has the unique feature of an automatic balancing system and includes parts for general testing purposes such as fluid rotary joints, slip rings, a fiber optic rotary joint and an Ethernet network system. In addition, a four degree-of-freedom in-flight robot can be equipped to simulate complex construction or in-situ testing process during centrifuge flight. In order to simulate earthquake motion during operation, a self-balancing type biaxial shaking table has also been developed. Since the KOCED program promotes collaboration and remote use, tele-presence and tele-participation environments have been implemented in this facility.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Choo, Y. W., Kim, D. S., Kim, K. H., Shin, D. H., Im, E. S., Cho, S. E., and Park, H. G. (2010). “Effect of drainage zoning and deeply placed plinth on CFGD.” Proceedings of the 7th International Conference on Physical Modelling in Geotechnics, Zurich, Switzerland, pp. 1177–1182.
Derkx, F., Merliot, E., Cottineau, L. M., and Garnier, J. (1998). “Onboard remote controlled centrifuge robot.” CENTRIFUGE 98, Tokyo, Japan, pp. 97–102.
Gaudin, C., White, D. J., Boylan, N., Breen, J., Brown, T., De Catania, S., and Hortin, P. (2009). “A wireless high-speed data acquisition system for geotechnical centrifuge model testing.” Measurement Science and Technology, Vol. 20, No. 9, pp. 1–11.
Kim, S., Choo, Y. W., Kim, D. J., and Kim, D. S. (2009). “Centrifuge study on installation of suction pile in sand and silt.” Proceedings of 22th KKCNN Symposium on Civil Engineering, Chiang Mai, Thailand.
Kim, N. R. and Kim, D. S. (2010). “A shear wave velocity tomography system for geotechnical centrifuge testing.” Geotechnical Testing Journal, Vol. 33, No. 6, pp. 434–444.
Kim, M. K., Lee, S. H., Choo, Y. W., and Kim, D. S. (2011). “Seismic behaviors of earth-core and concrete-faced rockfill dams by dynamic centrifuge tests.” Soil Dynamics and Earthquake Engineering, Vol. 31, No. 11, pp. 1579–1593.
Kim, J. K., Park, Y. S., Kim, D. S., Cheung, J. H., Lee, S. H., Kwon, S. D., Kim, T. H., Kim, C. Y., and Shin, S. (2008). “KOCED collaboratory program: Progress report.” 14th World Conference on Earthquake Engineering: Innovation Practice Safety. Beijing, China.
Kimura, T. (1998). “Development of geotechnical centrifuges in Japan.” CENTRIFUGE 98, Tokyo, pp. 945–954.
Lee, K. R. (2010). Engineering properties of sediment samples from the Ulleung Basin, East Sea and physical modeling of gas hydratebearing sediments, Master’s Thesis, KAIST, Daejeon, Korea.
Lee, S. H., Kim, S. H., Choo, Y. W., and Kim, D. K. (2010). “Dynamic centrifuge modeling for evaluating seismic loads of soil-foundationstructures.” Proceedings of KGS Fall National Conference, Gyeonggi, Korea (in Korean).
Ng, C. W. W., Van Laak, P. A., Zhang, L. M., Tang, W. H., Zong, G. H., Wang, Z. L., Xu, G. M., and Liu, S. H. (2002). “Development of a four-axis robotic manipulator for centrifuge modeling at HKUST.” Physical Modelling in Geotechnics: ICPMG’ 02, Newfoundland, Canada, pp. 71–76.
Park, J. O., Choo, Y. W., and Kim, D. S. (2009). “Evaluation of bearing capacity of piled raft foundation on OC clay using centrifuge and numerical modeling.” Journal of Korean Geotechnical Society, Vol. 25, No. 7, pp. 23–33 (in Korean).
Perdriat, J., Phillips, R., Nicolas Font, J., and Huntin, C. (2002). “Dynamically balanced broad frequency earthquake simulation system.” Physical Modelling in Geotechnics: ICPMG’ 02, Newfoundland, Canada, pp. 169–173.
Schofield, A. N. (1980). “Cambridge geotechnical centrifuge operation.” Géotechnique, Vol. 20, No. 3, pp. 227–268.
Shen, C.K., Li X. S., Ng, C.W.W., Van Laak, P.A., Kutter, B.L., Cappel, K., and Tauscher, R. C. (1998). “Development of a geotechnical centrifuge in Hong Kong.” Proceedings of the International Conference CENTRIFUGE 98, Tokyo, Japan, pp. 13–18.
Taylor, R. N. (1995). Geotechnical centrifuge technology, Blackie Academic, London, UK.
Zehgal, M., Dobry, R., Abdoun, T., Zimmie, T. F., and Elgamal, A.-W. M. (2002). “NEES earthquake simulation and networking capabilities at RPI centrifuge.” Proceedings of the Seventh U.S. National Conference on Earthquake Engineering (7NCEE), Boston.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, DS., Kim, NR., Choo, Y.W. et al. A newly developed state-of-the-art geotechnical centrifuge in Korea. KSCE J Civ Eng 17, 77–84 (2013). https://doi.org/10.1007/s12205-013-1350-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-013-1350-5