Abstract
A new visualization method for an illustrative visualization of physical parameters in immersive workspaces is presented. Through the newly developed visualization pipeline, FEM results such as stress, temperature and resulting deformation, as well as the underlying constraints can be visualized in virtual and augmented reality applications. Special features are the use of 3D glyphs for mapping stress direction and gradient as well as data preparation and the resulting data format, which was especially developed for use with VR systems. This article demonstrates the current state of VR developments, which were done at the Virtual Reality Center Production Engineering of the Institute for Machine Tools and Production Processes, for improving the analysis of complex FE datasets, and gives an outlook to future research activities.
Article PDF
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Weidlich D., Kolbig S., Polzin T. and Neugebauer R. (2005). Vr-unterstützte entwicklung von werkzeugmaschinen. ZWF 100(1–2): 59–65
Benölken, P., Riegel, J., Scherer, S., Weidlich, D.: Intuitive konfiguration von werkzeugmaschinen in der virtuellen realität, proc. In: Konferenz Simulation und Visualisierung, vol.f17, pp. 231–243. Otto-von-Guericke Universität, Magdeburg (2006)
Hesselink L. and Delmarcelle T. (1993). Visualizing second-order tensor fields with hyperstreamlines. IEEE Comput. Graph. Appl. 13(4): 25–33
Benölken, P.: Effiziente visualisierungs- und interaktionsmethoden zur analyse numerischer simulationen in virtuellen und erweiterten realitäten. Diss. TU Darmstadt (2005)
Kuhlen, T., Müller-Held, B., Cerfontaine, C.A.: Interaktive, vr-gestützte finite-elemente-datenanalyse von werkzeugmaschinen. In: Vortrag Proc. 4. Paderborner Workshop AR and VR in der Produktentstehung. Heinz Nixdorf Institut Universität Paderborn, 9–10 Juni (2005)
Vance J.M. and Ryken M.J. (2000). Applying virtual reality techniques to the interactive stress analysis of a tractor lift arm. Finite Elem. Anal. Des. 35(2): 141–155
Chang, T.S., Frederick, D.: Ontinuum mechanics, pp. 38–40. Scientific Publishers Inc., Boston (1972)
Haber R. (1990). Visualization techniques for engineering mechanics. Comput. Syst. Eng. 1(1): 37–50
Schorn, S.A., Moore, J., Moore, J.G.: Methods of classical mechanics applied to turbulence stresses in a tip leakage vortex. In: Int. Gas Turbine and Aeroengine Congress and Exposition, AMSE, Houston (1995)
Yao J.I., Wotring D.C. and Hashash Y.M.A. (2003). Glyph and hyperstreamline representation of stress and strain tensors and material constitutive response. Int. J. Numer. Anal. Methods Geomech. 27: 603–626
Kindlmann, G.L.: Superquadric tensor glyphs. In: IEEE/Eurographics Symposium on Visualization (VisSym), pp 147–154 (2004)
Jirka, T., Stankova, H., Dalikova, K., Mahn, U., Skala, V., Masek, B.: Using a non-standard visualization method for analysis of rotating bending tests. In: Eigth International Research/Expert Conference “Trends in the Development of Machinery and Associated Technology” TMT, pp 499–502. Neum, Bosni a Herzegovina, 15–19 September (2004)
Fuhrmann A., Gervautz M. and Szalavari Z. (1998). Studier Stube Schmalstieg, D. An environment for collaboration in augmented reality, virtual reality. Syst. Dev. Appl. 3(1): 37–49
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Scherer, S., Wabner, M. Advanced visualization for finite elements analysis in virtual reality environments. Int J Interact Des Manuf 2, 169–173 (2008). https://doi.org/10.1007/s12008-008-0044-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12008-008-0044-6