Abstract
Metallic equipment and structures that come in contact with a variety of petroleum products, solvents, water, the atmosphere, and soil in the oil and gas industry are highly prone to a range of corrosion phenomena, which escalate the risk of serious accidents. The use of green corrosion inhibitors in oil and gas can significantly reduce the maintenance and service costs. This study focuses on the anti-corrosive behavior of natural exudate gums, such as Azadirachta indica (G1), Moringa oleifera (G2), Prosopis juliflora (G3) and Prunus dulcis (G4). These gums were evaluated as corrosion inhibitors on mild steel against the diesel/saline water biphasic system by the weight loss method and electrochemical techniques. The inhibition efficiency was high at 93.86, 95.75, 92.42, and 90.02% at the highest tested concentration (5,000 ppm) for the gums G1, G2, G3, and G4, respectively. Among the investigated natural gums, the lowest corrosion rate (29.36 mm yr−1) and highest inhibition efficiency (95.75%) were achieved with Moringa oleifera (G2) at 5,000 ppm. The activation energy of the corrosion inhibition process (4.00–38 kJmol−1) was higher than that of the uninhibited system (1.8 kJmol−1), indicating that the inhibited systems possessed higher energy barriers and followed the Langmuir adsorption process. Our corrosion test results validate that the Moringa oleifera gum can serve as an effective eco-friendly corrosion inhibitor for mild steel in the biphasic system of diesel/saline water.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
C. Chandrasatheesh, J. Jayapriya and P. Prabunathan, J. Polym. Environ., 30, 1528 (2022).
C. Chandrasatheesh and J. Jayapriya, Biocorrosion. In Bioelectrochemical Interface Engineering, In: R. N. Krishnaraj, R. K. Sani Eds., John Wiley & Sons, Inc. NJ (2020).
H. El Hajj, A. Abdelouas, Y. El Mendili, G. Karakurt, B. Grambow and C. Martin, Corrosion Sci., 76, 432 (2013).
M. Iannuzzi, A. Barnoush and R. Johnsen, npj Mater. Degrad, 1, 2 (2017).
P. Badida, Y. Balasubramaniam and J. Jayaprakash, J. Nat. Gas Sci. Eng., 66, 284 (2019).
U. Unueroh, G. Omonria, O. Efosa and M. Awotunde, Niger. J. Technol., 35, 317 (2016).
D. M. Frazaõ, I. R. De Melo, M. R. S. Vieira and S. L. U. Filho, Mater. Res., 22, 1 (2019).
K. M. Usher, A. H. Kaksonen, I. Cole and D. Marney, Int. Biodeterior. Biodegrad., 93, 84 (2014).
J. S. Lee, R. I. Ray and B. J. Little, NACE International, NACE-10074, San Antonio, Texas (2010).
A. H. Al-Moubaraki and I. B. Obot, J. Saudi Chem. Soc., 25, 101370 (2021).
P. Topilnitskij, Chem. Chem. Technol., 1, 45 (2007).
B. D. B. Tiu and R. C. Advincula, React. Funct. Polym., 95, 25 (2015).
N. A. Odewunmi, M. M. Solomon, S. A. Umoren and S. A. Ali, ACS Omega, 5, 27057 (2020).
N. R. Vaidya, P. Aklujkar and A. R. Rao, J. Coat. Technol. Res., 19, 223 (2022).
M. Mobin, M. Rizvi, L. O. Olasunkanmi and E. E. Ebenso, ACS Omega, 2, 3997 (2017).
M. Abdallah, Portugaliae Electrochim. Acta, 22, 161 (2004).
P. Roy, P. Karfa, U. Adhikari and D. Sukul, Corrosion Sci., 88, 246 (2014).
S. A. Umoren and U. F. Ekanem, Chem. Eng. Commun., 197, 1339 (2010).
S. A. Umoren and E. E. Ebenso, Pigment Resin Technol., 37, 173 (2008).
A. A. Dalhatu, A. I. Sani, B. S. Sani and D. N. Sani, Int. Res. J. Pure Appl. Chem., 17, 1 (2019).
B. Thirumalairaj and M. Jaganathan, Egyptian J. Pet., 25, 423 (2016).
J. C. da Rocha, J. A. C. P. Gomes and E. D’Elia, Mater. Res., 17, 1581 (2014).
G. Palumbo, K. Berent, E. Proniewicz and J. Banaś, Materials (Basel), 12, 2620 (2019).
P. Kumari and M. Lavanya, J. Bio- and Tribo-Corrosion, 7, 110 (2021).
S. Bashir, A. Thakur, H. Lgaz, I.-M. Chung and A. Kumar, Surf. Interfaces, 20, 100542 (2020).
M. Messali, H. Lgaz, R. Dassanayake, R. Salghi, S. Jodeh, N. Abidi and O. Hamed, J. Mol. Struct., 1145, 43 (2017).
O. A. Akinbulumo, O. J. Odejobi and E. L. Odekanle, Results in Mater., 5, 100074 (2020).
F. El-Hajjaji, I. Merimi, L. El Ouasif, M. El Ghoul, R. Achour, B. Hammouti, M. E. Belghiti, D. S. Chauhan and M. A. Quraishi, Port. Electrochim. Acta, 37, 131 (2019).
P. Singh, D. S. Chauhan, K. Srivastava, V. Srivastava and M. A. Quraishi, Int. J. Ind. Chem., 8, 363 (2017).
A. Rezaei, A. Nasirpour and H. Tavanai, Food Hydrocolls, 60, 461 (2016).
D. Mudgil, S. Barak and B. S. Khatkar, Int. J. Biol. Macromol., 50, 1035 (2012).
P. D. Vasko, J. Blackwell and J. L. Koenig, Carbohydr. Res., 23, 407 (1972).
A. R. Rezaierod, A. R. Rahimi and M. Chaghazardi, Anal. Bioanal. Electrochem., 6, 657 (2014).
K. Azzaoui, E. Mejdoubi, S. Jodeh, A. Lamhamdi, E. Rodriguez-Castellón, M. Agarra, A. Zarrouk, A. Errich, R. Salghi and H. Lgaz, Corrosion Sci., 129, 70 (2017).
M. Manickam, D. Sivakumar, B. Thirumalairaj and M. Jaganathan, Adv. Phys. Chem., 2016, 1 (2016).
M. Abdallah, Portugaliae Electrochim. Acta, 22, 161 (2004).
M. Manickam, M. Jaganathan and D. Sivakumar, Int. J. Innovative Sci. Res. Technol., 2, 8 (2017).
A. Biswas, S. Pal and G. Udayabhanu, Appl. Surf. Sci., 353, 173 (2015).
G. Palumbo, K. Berent, E. Proniewicz, J. Banaś, Materials (Basel), 12, 16 (2019).
Acknowledgements
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (No. 2021R1A2C2006888).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
There are no declared conflicts of interest.
Rights and permissions
About this article
Cite this article
Palanisamy, R., Jayaprakash, J., Dhamodharan, D. et al. Anticorrosive efficiency and adsorption characteristics of natural plant gums on mild steel exposed to the Diesel/Saline water biphasic system. Korean J. Chem. Eng. 40, 2187–2198 (2023). https://doi.org/10.1007/s11814-023-1397-z
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-023-1397-z