Abstract
The burning of fossil fuels produces carbon dioxide emissions, increased levels of which cause serious environmental problems. Therefore, the design and use of new materials as media for capturing carbon dioxide and other gases, such as hydrogen and methane, has attracted significant research attention. In this work, three metal complexes containing a fusidate moiety were synthesized and tested as storage media for gases. By reacting sodium fusidate and metal chlorides in boiling ethanol, the corresponding metal complexes were obtained with 69–76% yields. The fusidate moiety acts as a bidentate ligand with variable geometry (distortion octahedral, square planner, or tetrahedral) depending on the metal (manganese, copper, or zinc, respectively) it is associated with. The elemental composition of the metal complexes was confirmed via energy dispersive X-ray spectroscopy and their surface morphology was inspected via field emission scanning electron microscopy. The Brunauer-Emmett-Teller surface area of the metal complexes varied from 31.2 to 46.9 m2/g, with pore volume and diameters of 0.035–0.049 cm3/g and 3.02–3.18 nm, respectively. The gas uptake at 323 K for carbon dioxide, hydrogen, and methane depended on the metal, gas, surface pore volume, and pore diameter. Reasonable carbon dioxide uptake (6.3–7.2wt%) was achieved with fusidate metal complexes at high temperature and pressure, whereas hydrogen and methane slowly permeated throughout the complexes.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
K. L. Lim, H. Kazemian, Z. Yaakob and W.R.W. Daud. Chem. Eng. Technol., 33, 213 (2010).
P. A. Owusu and S. Asumadu-Sarkodie, Cogent. Eng., 3, 1167990 (2016).
A. Qazi, F. Hussain, N. A. Rahim, G. Hardaker, D. Alghazzawi, K. Shaban and K. Haruna, IEEE Access, 7, 63837 (2019).
N. A. Ludin, N. I. Mustafa, M. M. Hanafiah, M. A. Ibrahim, M. A. M. Teridi, S. Sepeai, A. Zaharim and K Sopian, Renew. Sustain. Energy Rev., 96, 11 (2018).
F. Fornara, P. Pattitoni, M. Mura and E. Strazzera, J. Environ. Psychol., 45, 1 (2016).
A. Mardani, A. Jusoh, E. K. Zavadskas, E. Cavallaro and Z. Khalifah Sustainability, 7, 13947 (2015).
A. Azarpour, S. Suhaimi, G. Zahedi and A. Bahador, Arab. J. Sci. Eng., 38, 317 (2013).
M. Ho, E. Obbard, P. A. Burr and G. Yeoh, Energy Procedia, 160, 459 (2019).
F. C. Carvalho, P. F. Nascimento, M. R. O. Souza and A. S. Araujo, Processes, 8, 289 (2020).
M. Busu, Processes, 7, 923 (2019).
A. Borhan, S. Yusup, J. W. Lim and P. L. Show, Processes, 7, 855 (2019).
M. Razavian, S. Fatemi and M. Masoudi-Nejad, Adsorpt. Sci. Technol., 32, 73 (2014).
H. Li, L. Li, R.-B. Lin, W. Zhou, Z. Zhang, S. Xiang and B. Chen, EnergyChem, 1, 100006 (2019).
H. Lyu, Q. Zhang, Y. Wang and J. Duan, Dalton Trans., 47, 4424 (2018).
D. Y. C. Leung, G. Caramanna and M. M. Maroto-Valer, Renew. Sustain. Energy Rev., 39, 426 (2014).
L. Raynal, P.-A. Bouillon, A. Gomez and P. Broutin. Chem. Eng. J., 171, 742 (2011).
E. J. Novek, E. Shaulsky, Z. S. Fishman, L. D. Pfefferle and M. Elimelech, Environ. Sci. Technol. Lett., 3, 291 (2016).
Q. Zhuang, R. Pomalis, L. Zheng and B. Clements, Energy Procedia, 4, 1459 (2011).
C. Lu, T. Ben and S. Qiu, Macromol. Chem. Phys., 217, 1995 (2016).
T. Liu, J. Ding, Z. Su and G. Wei, Mater. Today Energy, 6, 79 (2017).
Q.-R. Fang, T. A. Makal, M. D. Young and H.-C. Zhou, Comment Inorg. Chem., 31, 165 (2010).
Y.-C. Chiang, C. Y. Yeh and C. H. Weng, Appl. Sci., 9, 1977 (2019).
E. H. Al-Ghurabi, A. Ajbar and M. Asif, Appl. Sci., 8, 1467 (2018).
P. Staciwa, U. Narkiewicz, D. Moszyński, R. J. Wróbel and R. D. Cormia, Appl. Sci., 9, 3349 (2019).
D. S. Ahmed, G. A. El-Hiti, E. Yousif, A. A. Ali and A. S. Hameed, J. Polym. Res., 25, 75 (2018).
R. Dawson, A. I. Cooper and D. J. Adams, Prog. Polym. Sci., 37, 530 (2012).
W. Wang, M. Zhou and D. Yuan, J. Mater. Chem. A, 5, 1334 (2017).
H. A. Satar, A. A. Ahmed, E. Yousif, D. S. Ahmed, M. F. Alotibi and G. A. El-Hiti, Appl. Sci., 9, 4314 (2019).
A. Mohammed, E. Yousif and G. A. El-Hiti, Materials, 13, 1183 (2020).
A. G. Hadi, K. Jawad, E. Yousif, G. A. El-Hiti, M. H. Alotaibi and D. S. Ahmed, Molecules, 24, 1631 (2019).
R. M. Omer, E. T. B. Al-Tikrity, G. A. El-Hiti, M. F. Alotibi, D. S. Ahmed and E. Yousif, Processes, 8, 17 (2020).
D. S. Ahmed, G. A. El-Hiti, E. Yousif, A. S. Hameed and M. Abdalla, Polymers, 9, 336 (2017).
M. E. Falagas, A. P. Grammatikos and A. Michalopoulos, Expert. Rev. Anti. Infect. Ther., 6, 593 (2008).
K. Sing, Colloids Surf., 187–188, 3 (2001).
M. Pellerano, P. Pre, M. Kacem and A. Delebarre, Energy Procedia, 1, 647 (2009).
L. Hauchhum and P. Mahanta, Int. J. Energy Environ. Eng., 5, 349 (2014).
R. Gangadhar, K. A. Jaleeli and A. Ahmad, Int. J. Sci. Environ. Technol., 4, 1195 (2015).
Y. R. Sharma, Elementary organic spectroscopy: Principles and chemical applications, S Chad & Company Ltd, New Delhi, India (2008).
M. Ibrahim, A. Nada and D. E. Kamal, Indian J. Pure Appl. Phys., 43, 911 (2005).
A. A. Awad, M. M. Hasson, A. A. Fadhel and B. F. Alfarhani, J. Phys. Conf. Series, 1294, 052040 (2019).
Q.-Q. Xiao, D. Liu, Y.-L. Wei and G.-H. Cui, J. Solid State Chem., 273, 67 (2019).
G. B. Deacon and R. J. Phillips, Coordin. Chem. Rev., 33, 227 (1980).
M. Alias, H. Kassum and C. Shakir, J. King Saud Uni. Sci., 25, 157 (2013).
M. F. Alias and A. S. Basha’ar, Baghdad Sci. J., 11, 1556 (2014).
M. F. Alias and A. N. Seewan, Diyala J. Pure Sci., 9, 93 (2013).
H. E. L. Hamdani and M. E. L. Amane, J. Mol. Struct., 1184, 262 (2019).
N. I. Dodoffa, D. Kovala-Demertzi, M. Kubiak, J. Kuduk-Jaworska, A. Kochel and G. A. Gorneva, Z. Naturforsch. B Chem. Sci., 61, 1110 (2006).
B. R. Vergis, N. Kottam, R. H. Krishna and B. M. Nagabhushana, Nano-Struct. Nano-Objects, 18, 100290 (2019).
M. Thommes, K. Kaneko, A. V. Neimark, J. P. Olivier, F. Rodriguez-Reinoso, J. Rouquerol and K. S. W. Sing, Pure Appl. Chem., 87, 1051 (2015).
K. A. Cychosz and M. Thommes, Engineering, 4, 559 (2018).
A. Khadilkar and S. Chavan. Bom. Technol., 59, 44 (2009).
H. Furukawa and O. M. Yaghi, J. Am. Chem. Soc., 131, 8875 (2009).
Y. Peng, V. Krungleviciute, I. Eryazici, J. T. Hupp, O. K. Farha and T. Yildirim, J. Am. Chem. Soc., 135, 11887 (2013).
M. Razavian, S. Fatemi and M. Masoudi-Nejad, Adsorpt. Sci. Technol., 32, 73 (2014).
J.-R. Li, Y. Ma, M. C. McCarthy, J. Sculley, J. Yu, H.-K. Jeong, P. B. Balbuena and H.-C. Zhou, Coord. Chem. Rev., 255, 1791 (2011).
H. A. Ozen and B. Ozturk, Sep. Purif. Technol., 211, 514 (2019).
A. B. Fuertes, J. Membr. Sci., 177, 9 (2000).
Y. Xia, Z. Yang and Y. Zhu, J. Mater. Chem. A, 1, 9365 (2013).
J. Choma, M. Kloske, A. Dziura, K. Stachurska and M. Jaroniec, Eng. Prot. Environ., 19, 169 (2016).
Acknowledgements
The authors are grateful to the Deanship of Scientific Research, King Saud University for funding through the Vice Deanship of Scientific Research Chairs. We thank Al-Nahrain University for technical support.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Mahmood, Z.N., Alias, M., El-Hiti, G.AR. et al. Synthesis and use of new porous metal complexes containing a fusidate moiety as gas storage media. Korean J. Chem. Eng. 38, 179–186 (2021). https://doi.org/10.1007/s11814-020-0692-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-020-0692-1