Abstract
Due to increasing interest in the application of perovskites as promising adsorbents, the present study looks at how central composite design (CCD), a subset of response surface methodology (RSM), can statistically play a role in producing optimum lanthanum oxide-cobalt perovskite type nanoparticles (LaCoO3) by using a modified proteic synthesis method. The optimum LaCoO3 produced was tested for its capability in removing methyl orange (MO) and rhodamine B (RhB) dyes from aqueous solution. Calcination temperature and calcination time were optimized with the responses being percentage yield, MO and RhB removal. The best temperature and calcination time obtained were 775 °C and 62 mins, respectively, giving good and appreciable values for the three responses. The resulting optimal LaCoO3 was characterized by Fourier transform infra-red (FTIR), ultraviolet-visible spectrophotometry (UV/vis), scanning electron microscopy (SEM), pH of zero point charge (pHpzc) as well as BET analysis, yielding a mesoporous adsorbent with surface area of 61.130 m2 g−1 as well as 223.55 and 239.45 mg g−1 as the monolayer adsorption capacity values for MO and RhB, respectively. Freundlich model was the best in describing the equilibrium adsorption data with respect to both MO and RhB with the kinetic data for the two dyes both obeying pseudo-second-order kinetics model.
Article PDF
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
M. E. Argun, D. Güclü and M. Karatas, J. Ind. Eng. Chem., 20, 1079 (2014).
M. Shaban, M. R. Abukhadra, A. A. Parwaz Khan and B. M. Jibali, J. Taiwan Inst. Chem. Eng., 82, 102 (2018).
F. Banat, S. Al-Asheh, R. Al-Ahmad and F. Bni-Khalid, Bioresour. Technol., 98, 3017 (2007).
G. Crini, Bioresour. Technol., 97, 1061 (2006).
E. Brillas and C. A. Martínez-Huitle, Appl. Catal. B, 166–167, 603 (2015).
V. Khandegar and A. K. Saroha, J. Environ. Manage., 128, 949 (2013).
M. Bradha, T. Vijayaraghavan, S. P. Suriyaraj, R. Selvakumar and A. M. Ashok, J. Rare Earths, 33, 160 (2015).
T. Santhi, A. L. Prasad and S. Manonmani, Arab. J. Chem., 7, 494 (2014).
Y.-D. Chen, W.-Q. Chen, B. Huang and M.-J. Huang, Chem. Eng. Res. Des., 91, 1783 (2013).
M. H. Dehghani, A. Zarei, A. Mesdaghinia, R. Nabizadeh, M. Ali-mohammadi, M. Afsharnia and G. McKay, Chem. Eng. Res. Des., 140, 102 (2018).
Z. N. Garba, F. B. S. Shikin and A. R. Afidah, J. Chem. Eng. Chem. Res., 2, 623 (2015).
Z. N. Garba, A. R. Afidah and B. Z. Bello, J. Environ. Chem. Eng., 3, 2892 (2015).
H. Tavakkoli and M. Yazdanbakhsh, Micropor. Mesopor. Mater., 176, 86 (2013).
M. Yazdanbakhsh, H. Tavakkoli and S. M. Hosseini, Desalination, 281, 388 (2011).
M. Algueró, P. Ramos, R. Jiménez, H. Amorín, E. Vila and A. Castro, Acta Mater., 60, 1174 (2012).
C. Moure and O. Peña, Solid State Chem., 43, 148 (2015).
R. G. Shetkar and A. V. Salker, J. Mater. Sci. Technol., 26, 1098 (2010).
R. Guo, T. Jiao, R. Li, Y. Chen, W. Guo, L. Zhang, J. Zhou, Q. Zhang and Q. Peng, ACS Sustainable Chem. Eng., 6, 1279 (2018).
K. Li, T. Jiao, R. Xing, G. Zou, J. Zhou, L. Zhang and Q. Peng, Sci. China Mater., 61, 728 (2018).
R. Guo, R. Wang, J. Yin, T. Jiao, H. Huang, X. Zhao, L. Zhang, Q. Li, J. Zhou and Q. Peng, Nanomater., 9, 127 (2019).
X. Huang, R. Wang, T. Jiao, G. Zou, F. Zhan, J. Yin, L. Zhang, J. Zhou and Q. Peng, ACS Omega, 4, 1897 (2019).
A. G. Santos, J. O. Leite, M. J. B. Souza, I. F. Gimenez and A. M. Garrido Pedrosa, Ceram. Int., 44, 5743 (2018).
E. Grabowska, Appl. Catal. B, 186, 97 (2016).
Z. N. Garba and A. R. Afidah, J. Anal. Appl. Pyrol., 107, 306 (2014).
J. Nsor-Atindana, M. Chen, H. D. Goff, F. Zhong, H. R. Sharif and Y. Li, Carbohyd. Polym., 172, 159 (2017).
G. Thoorens, F. Krier, B. Leclercq, B. Carlin and B. Evrard, Int. J. Pharm., 473, 64 (2014).
X. Zhang, Y. Wu, X. Li, X. Meng, H. Shi, Z. Wu and J. Zhang, Korean J. Chem. Eng., 36, 753 (2019).
Z. N. Garba, A. R. Afidah and S. A. Hamza, J. Environ. Chem. Eng., 2, 1423 (2014).
M. A. Ahmad and R. Alrozi, Chem. Eng. J., 165, 883 (2010).
C. W. Oo, M. J. Kassim and A. Pizzi, Ind. Crop. Prod., 30, 152 (2009).
W. S. Wan Ngah, S. Fatinathan and N. A. Yosop, Desalination, 272, 293 (2011).
L. T. Popoola, A. S. Yusuff, O. A. Adesina and M. A. Lala, J. Environ. Sci. Technol., 12, 65 (2019).
R. Baccar, P. Blánquez, J. Bouzid, M. Feki, H. Attiya and M. Sarrà, Fuel Proces. Technol., 106, 408 (2013).
M. Auta and B. H. Hameed, Chem. Eng. J., 175, 233 (2011).
H. Deng, L. Yang, G. Tao and J. Dai, J. Hazard. Mater., 166, 1514 (2009).
S. Deng, Y. Nie, Z. Du, Q. Huang, P. Meng, B. Wang, J. Huang and G. Yu, J. Hazard. Mater., 282, 150 (2015).
J. N. Sahu, J. Acharya and B. C. Meikap, Bioresour. Technol., 101, 1974 (2010).
M. A. Ahmad and R. Alrozi, Chem. Eng. J., 171, 510 (2010).
M. K. B. Gratuito, T. Panyathanmaporn, R. A. Chumnanklang, N. Sirinuntawittaya and A. Dutta, Bioresour. Technol., 99, 4887 (2008).
Ç. D. Şentorun-Shalaby, M. G. Uçak-Astarlioǧ Lu, L. Artok and Ç. Sarıcı, Micropor. Mesopor. Mater., 88, 126 (2006).
L. Zhang, B. Zhang, T. Wu, D. Sun and Y. Li, Colloids Surf., A: Physicochem. Eng. Aspects, 484, 118 (2015).
B. Tanhaei, A. Ayati, M. Lahtinen and M. Sillanpää, Chem. Eng. J., 259, 1 (2015).
T. Soltani and B.-K. Lee, J. Colloid Interface Sci., 481, 168 (2016).
S. Wang, B. Yang and Y. Liu, J. Colloid Interface Sci., 507, 225 (2017).
Z.-L. Cheng, Y.-X. Li and Z. Liu, Ecotoxicol. Environ. Safety, 148, 585 (2018).
Y. Ma, X. Y. Wu and G. K. Zhang, Appl. Catal. B,-Environ., 205, 262 (2017).
J. C. Santos, M. J. B. Souza, M. E. Mesquita and A. M. G. Pedrosa, Sci. Plen., Sci. Plen., 8, 1 (2012).
G. Leofanti, M. Padovan, G. Tozzola and B. Venturelli, Catal. Today, 41, 207 (1998).
A. G. Margellou, I. T. Papadas, D. E. Petrakis and G. S. Armatas, Mater. Res. Bull., 83, 491 (2016).
Q. Q. Shi, J. Zhang, C. L. Zhang C. Li, B. Zhang, W.W. Hu and J. T. Xu, J. Environ. Sci., 22, 91 (2010).
C. H. C. Tan, S. Sabar and M. H. Hussin, South African J. Chem. Eng., 26, 11 (2018).
A. Benaicha and M. Omari, J. Fundam. Appl. Sci., 10, 132 (2018).
P. W. Atkins, T. L. Overton, J. P. Rourke and M. T. Weller, Shriver and Atkins’ W. H. Freeman and Company, 5th Ed. New York (2010).
J. C. Santos, M. J. B. Souza, J. A. C. Ruiz, D. M. A. Melo, M. E. Mesquita and A. M. G. Pedrosa, J. Braz. Chem. Soc., 23, 1858 (2012).
C. J. Jones, Bookman, Porto Alegre, RS (2002).
S. Hosseini, M. A. Khan, M. R. Malekbala, W. Cheah and T. S. Y. Choong, Chem. Eng. J., 171, 1124 (2011).
R. Huang, Q. Liu, J. Huo and B. Yang, Arab. J. Chem., 10, 24 (2017).
H. Z. Ma, B. Wang and X. Y. Luo, J. Hazard. Mater., 149, 492 (2007).
S. Khamparia and D. Jaspal, J. Environ. Manage, 183, 786 (2016).
P. K. Satapathy, M. Das and A. K Sahoo, Indian J. Chem. Technol., 21, 257 (2014).
M. Mohammadi, A. J. Hassani, A. R. Mohamed and G. D. Najafpour, J. Chem. Eng. Data, 55, 5777 (2010).
N. S. Maurya, A. K. Mittal, P. Cornel and E. Rother, Bioresour. Technol., 97, 512 (2006).
T. Soltani and M. H. Entezari, Chem. Eng. J., 223, 145 (2013).
B. H. Hameed and M. I. El-Khaiary, J. Hazard. Mater., 159, 574 (2008).
F. Hayeeye, M. Sattar, W. Chinpa and O. Sirichote, Colloids Surf., A: Physicochem. Eng. Aspects, 513, 259 (2017).
N. N. Bahrudin, M. A. Nawi and W. I. N. W. Ismail, Korean J. Chem. Eng., 35, 1450 (2018).
M. N. Anjum, K. M. Zia, L. Zhu, Haroon-ur-Rashid, M. N. Ahmad, M. Zuber and H. Tang, Korean J. Chem. Eng., 31, 2192 (2014).
J. Liu, S. Ma and L. Zang, Appl. Surf. Sci., 265, 393 (2013).
L. Zhai, Z. Bai, Y. Zhu, B. Wang and W. Luo, Chinese J. Chem. Eng., 26, 657 (2018).
M. Sattar, F. Hayeeye, W. Chinpa and O. Sirichote, J. Environ. Chem. Eng., 5, 3780 (2017).
L. Largitte and R. Pasquier, Chem. Eng. Res. Des., 112, 289 (2016).
L. Largitte and R. Pasquier, Chem. Eng. Res. Des., 109, 495 (2016).
L. Mouni, L. Belkhiri, J.-C. Bollinger, A. Bouzaza, A. Assadi, A. Tirri, F. Dahmoune, K. Madani and H. Remini, Appl. Clay Sci., 153, 38 (2018).
P. Saha and S. Chowdhury, Intech, 16, 349 (2011).
D. Duranoğlu, A. W. Trochimczuk and U. Beker, Chem. Eng. J., 187, 193 (2012).
S. Jiancheng, L. Renlong, W. Haiping, L. Zuohua, S. Xiaolong and T. Changyuan, J. Taiwan Inst. Chem. Eng., 82, 351 (2018).
G. Z. Kyzas, N. K. Lazaridis and A. C. Mitropoulos, Chem. Eng. J., 189–190, 148 (2012).
P. Liao, Z. Malik Ismael, W. Zhang, S. Yuan, M. Tong, K. Wang and J. Bao, Chem. Eng. J., 195–196, 339 (2012).
O. Hernandez-Ramirez and S. M. Holmes, J. Mater. Chem., 18, 2751 (2008).
N. M. Mahmoodi, B. Hayati, M. Arami and C. Lan, Desalination, 268, 117 (2011).
I. A. W. Tan, A. L. Ahmad and B. H. Hameed, J. Hazar. Mater., 164, 473 (2009).
Y Qiu, Z. Zheng, Z. Zhou and G. D. Sheng, Bioresour. Technol., 100, 5348 (2009).
Y. Yu, B. N. Murthy, J. G. Shapter, K. T. Constantopoulos, N. H. Voelcker and A. V. Ellis, J. Hazard. Mater., 260, 330 (2013).
Acknowledgements
The authors humbly acknowledge the international funding provided by Fujian Agriculture and Forestry University (KXB16001A) and the Department of Science and Technology of Fujian Province (2017H6003), P.R. China.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors have no conflict of interest with regards to the submission and publication of this article.
Supporting Information
11814_2019_400_MOESM1_ESM.pdf
Process optimization and synthesis of lanthanum-cobalt perovskite type nanoparticles (LaCoO3) prepared by modified proteic method: Application of response surface methodology
Rights and permissions
About this article
Cite this article
Garba, Z.N., Xiao, W., Zhou, W. et al. Process optimization and synthesis of lanthanum-cobalt perovskite type nanoparticles (LaCoO3) prepared by modified proteic method: Application of response surface methodology. Korean J. Chem. Eng. 36, 1826–1838 (2019). https://doi.org/10.1007/s11814-019-0400-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-019-0400-1