Abstract
Previous batch control methods, such as iterative learning control (ILC) or run-to-run (R2R) control, can significantly improve the control performance of the batch process. However, to guarantee the expected good control performance, a fairly accurate process model is required for these controllers. Also, the implementation is numerically complicated so that it is difficult to be applied to real manufacturing processes. To overcome these problems, a new batch proportional-integral-derivative (PID) control method is proposed, which borrows the concept of the conventional PID control method. Simulation studies confirm that the proposed method shows acceptable performance in tracking a setpoint trajectory, rejecting disturbances, and robustness to noises and variation of process dynamics. The application to the commercial batch process of a single crystal grower verifies that the proposed method can significantly contribute to improving the control performances of real batch processes.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Y. Wang, G. Gao and F. J. Doyle, J. Process Control, 19, 1589 (2009).
E. Del Castillo and A.M. Hurwitz, J. Qual. Technol., 29, 184 (1997).
H. S. Ahn, Y. Chen and K. L. Moore, IEEE Trans. Syst. Man. Cybern. C Appl. Rev., 37, 1099 (2007).
D. Yu, Y. Zhu, K. Yang, C. Hu and M. Li, Proc. Inst. Mech. Eng. I J. Syst. Control Eng., 228, 658 (2014).
K. S. Lee and J. H. Lee, J. Process Control, 13, 607 (2003).
E. Sachs, R. S. Guo, S. Ha and A. Hu, IEEE Trans. Semicond. Manuf., 4, 134 (1991).
T. F. Edgar, W. J. Campbell and C. Bode, Proceedings of the 38th IEEE Conference, 4, 4185 (1999).
K. S. Lee, S. H. Bang and K. S. Chang, J. Process Control, 4, 77 (1994).
I. Chin, S. J. Qin, K. S. Lee and M. Cho, Automatica, 40, 1913 (2004).
J. Lu, Z. Cao, Z. Wang and F. Gao, Ind. Eng. Chem. Res., 54, 5683 (2015).
S.K. Oh and J. M. Lee, J. Chem. Eng. Jpn., 50, 415 (2017).
S.W. Sung, J. Lee and I. B. Lee, Process identification and PID control, John Wiley & Sons (2009).
G. F. Franklin, J.D. Powell and M. L. Workman, Digital control of dynamic systems (Vol. 3), CA: Addison-Wesley (1998).
K. S. Lee, W. C. Kim and J. H. Lee, J. Inst. Control, Robotics Systems, 2, 148 (1996).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kwon, W.H., Ryu, K.H., Hwang, JA. et al. Development of batch proportional-integral-derivative controller. Korean J. Chem. Eng. 35, 1240–1246 (2018). https://doi.org/10.1007/s11814-018-0024-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-018-0024-x