Abstract
Computational fluid dynamics (CFD) simulations were applied for evaluating the hydrodynamics characteristics in an uncovered unbaffled tank agitated by pitched blade turbines. A volume of fluid (VOF) method along with a Reynolds stress model (RSM) was used to capture the gas-liquid interface and the turbulence flow in the tank. The reliability and accuracy of the simulations are verified. The simulation results show that the vortex can be divided into central zone and peripheral zone, and flow field in the tank can be divided into forced vortex flow region and free vortex flow region. With the increase of impeller speed, the vortex becomes deeper, while the critical radius of the two zones keeps almost unchanged. The impeller clearance and the rotational direction have little effect on the vortex shape. The vortex becomes deeper with increasing of the impeller diameter or the blade angles at the same rotational speed. Power number is little influenced by the impeller speed, and decreases by about 30% when impeller diameter varies from 0.25T to 0.5T. When blade angle varies from 30° to 90°, power number increases by about 2.32-times. Power number in uncovered unbaffled tank is much smaller than that in baffled tank, but is very close to that in a covered unbaffled tank. The discrepancy of power number in uncovered unbaffled tank and that in covered unbaffled tank is less than 10%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D. J. Lamberto, F. J. Muzzil, P.D. Swanson and A.L. Tonkovich, Chem. Eng. Sci., 51, 733 (1996).
M. M. Álvarez, P. E. Arratia and F. J. Muzzio, Can. J. Chem. Eng., 80, 546 (2002).
Y. Y. Hu, Z. Liu, J. C Yang and Y. Cheng, Chinese J. Chem. Eng., 61, 2517 (2010).
J.M. Rousseaux, H. Muhr and E. Plasari, Can. J. Chem. Eng., 79, 697 (2001).
D. Hekmat, D. Hebel, H. Schmid and D. Weuster-Botz, Process Biochem., 42, 1649 (2007).
A.R. Rao and B. Kumar, J. Chem. Technol. Biotechnol., 82, 101 (2007).
F. Rieger, P. Ditl and V. Noval, Chem. Eng. Sci., 34, 397 (1979).
A.R. Rao, B. Kumar and A. K. Patel, Science Asia, 35, 183 (2009).
M. Zlokarnik, Chem. Eng. Technol., 43, 1028 (1971).
M. Ciofalo, A. Brucato, F. Grisafi and N. Torraca, Chem. Eng. Sci., 51, 3357 (1996).
J. Markopoulos and E. Kontogeorgaki, Chem. Eng. Technol., 18, 68 (1995).
S. Nagata, Mixing: Principles and Applications, Wiley, New York (1975).
F. Grisafi, A. Brucato and L. Rizzuti, Inst. Chem. Eng. Symp. Ser., 136, 571 (1994).
J.N. Haque, T. Mahmud and K. J. Roberts, Ind. Eng. Chem. Res., 45, 2881 (2006).
J.N. Haque, T. Mahmud, K. J. Roberts, J.K. Liang, G. White, D. Wilkinson and D. Rhodes, Can. J. Chem. Eng., 89, 745 (2011).
F. Scargiali, A. Busciglio, F. Grisafi, A. Tamburini, G. Micale and A. Brucato, Ind. Eng. Chem. Res., 52, 14998 (2013).
A.R. Rao, A. Kumar Patel and B. Kumar, J. Chem. Technol. Biotechnol., 85, 805 (2010).
A.R. Rao and B. Kumar, J. Hydraul. Div., Am. Soc. Civ. Eng., 135, 38 (2009).
M. Assirelli, W. Bujalski, E. Archie and A.W. Nienow, Chem. Eng. Sci., 63, 35 (2008).
A. Busciglio, F. Grisafi, F. Scargiali and A. Brucato, Chem. Eng. J., 254, 201 (2014).
G.M.C. Glover and J. J. Fitzpatrick, Chem. Eng. J., 127, 11 (2007).
F. L. Yang and S. J. Zhou, Chem. Biochem. Eng. Q., 29, 395 (2015).
N. Lamarque, B. Zoppé, Q. Lebaigue, Y. Dolias, M. Bertrand and F. Ducros, Chem. Eng. Sci., 65, 4307 (2010).
C.G. Speziale, S. Sarkar and T. B. Gatski, J. Fluid Mech., 277, 245 (1991).
F. Nemdili, A. Azzi, G. Theodoridis and B.A. Jubran, Heat Transfer. Eng., 11, 950 (2008).
C. Vallée, T. Höhne, H. M. Prasser and T. Sühnel, Nucl. Eng. Des., 238, 637 (2008).
A. Tamburini, A. Cipollina, G. Micale, F. Scargiali and A. Brucato, Ind. Eng. Chem. Res., 55, 7535 (2016).
J. Markopoulos and E. Kontogeorgaki, Chem. Ing. Technol., 65, 839 (1993).
F. Scargiali, A. Busciglio, F. Grisafi and A. Brucato, Biochem. Eng. J., 82, 41 (2014).
Z. Driss, G. Bouzgarrou, W. Chtourou, H. Kchaou and M. S. Abid, Eur. J. Mech. B-Fluid, 29, 236 (2010).
P.M. Armenante, C. Luo, C. C. Chou, I. Fort and J. Medek, Chem. Eng. Sci., 20, 3483 (1997).
A. Tamburini, A. Brucato, A. Busciglio, A. Cipollina, F. Grisafi, G. Micale, F. Scargiali and G. Vella, Ind. Eng. Chem. Res., 53, 9587 (2014).
R. L. Bates, P.L. Fondy and R.R. Corpstein, I. and Ec Proc. Des. Dev., 2, 310 (1963).
V. B. Rewatkar, K.S.M.S. Raghava Rao and J.B. Joshi, Chem. Eng. Commun., 88, 69 (1990).
G. Montante, K. C. Lee, A. Brucato and M. Yianneskis, Chem. Eng. Sci., 56, 3751 (2001).
S. Ibrahim and A.W. Nienow, Trans. IChemE. Eng. Res. Des., 73, 485 (1995).
K. Yapici, B. Karasozen, M. Schäfer and Y. Uludag, Chem. Eng. Process., 47, 1340 (2008).
L. Smit and J. During, Vortex geometry in stirred vessels, Proceedings of the 7th European Congress on Mixing, Belgium, Bruges 2: 633 (1991).
C.Y. Ge, J. J. Wang, X. P. Gu and L. F. Feng, Chem. Eng. Res. Des., 92, 1027 (2014).
D. Chapple, S. M. Kresta, A. Wall and A. Afacan, Trans. IChem. E., 80, Part A, 364 (2002).
M. Moštek, A. Kukuková, M. Jahoda and V. Machon, Chem. Pap., 59, 380 (2005).
Cz. Kuncewicz and M. Pietrzykowski, Chem. Eng. Sci., 56, 4659 (2001).
F. Scargiali, A. Tamburini, G. Caputo and G. Micale, Chem. Eng. Res. Des., 123, 99 (2017).
A. Le Lan and H. Angelino, Chem. Eng. Sci., 27, 1969 (1972).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, L., Wang, J., Feng, L. et al. Computational fluid dynamics simulation of hydrodynamics in an uncovered unbaffled tank agitated by pitched blade turbines. Korean J. Chem. Eng. 34, 2811–2822 (2017). https://doi.org/10.1007/s11814-017-0208-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-017-0208-9