Abstract
The hydrocracking of waste lubricant into gasoline fraction was carried out using CoMo catalyst supported on mesoporous carbon. The carbon was synthesized using bovine bone gelatin and SBA-15 as a template. The metals were loaded onto the carbon by wet impregnation method. The total metal content of catalyst was prepared into two different amounts which were labelled as CoMo/MCG1 and CoMo/MCG2. Catalytic activity and selectivity were evaluated in hydrocracking of waste lubricant at 450, 475, and 500 °C, and lubricant/catalyst weight ratio of 50, 100, 200, 300, and 400. The result revealed that acidity and specific surface area of the catalyst played an important role in determining the catalytic performance in the hydrocracking of waste lubricant. The highest percentage of gasoline fraction was 58.09%, produced by hydrocracking of waste lubricant at 475 °C and lubricant/catalyst weight ratio of 300 using CoMo/MCG2 catalyst.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
A. Permsubscul, T. Vitidsant and S. Damronglerd, Korean J. Chem. Eng., 24(1), 37 (2006).
W. Trisunaryanti, S. Purwono and A. Putranto, Indo. J. Chem., 8(3), 342 (2008).
W. Trisunaryanti, A. Syoufian and S. Purwono, J. Chem. Chem. Eng., 7, 175 (2013).
M. Egorova and R. Prins, J. Catal., 225, 417 (2004).
M. Hussain, K. S. Song, H. J. Lee and K. S. Ihm, Ind. Eng. Chem. Res., 45, 536 (2006).
Y. Boukoberine and B. Hamada, Arabian J. Chem., 9(1), 522 (2016).
E. Soghrati, M. Kazemeini, M.A. Rashidi and J. K. Jozani, Procedia Eng., 42, 1484 (2012).
W. Sriningsih, M. G. Saerodji, W. Trisunaryanti, R. Armunanto and I. I. Falah, Procedia Environ. Sci., 20, 215 (2014).
Y. Fan, J. Lu, G. Shi, H. Liu and X. Bao, Catal. Today, 125, 220 (2007).
M. Hussain and S. Ihm, Ind. Eng. Chem. Res., 3, 698 (2009).
X. He, Y. Zhang, C. Zhu, H. Huang, H. Hu, Y. Liu and Z. Kang, New. J. Chem. (2015), DOI:10.1039/C5NJ01430A.
D.-H. Yeom, J. Choi, W. J. Byun and J. K. Lee, Korean J. Chem. Eng., 33, 3029 (2016).
A. Lu, W. Li, W. Schmidt, W. Kiefer and S. Ferdi, Carbon, 42, 2939 (2004).
B. Sakintuna and Y. Yurum, Micropor. Mesopor. Mater., 93, 304 (2006).
K. Kamegawa, M. Kodama, K. Nishikubo, H. Yamada, Y. Adachi and H. Yoshida, Micropor. Mesopor. Mater., 87, 118 (2005).
V. P. Vigón, M. Sevilla and A. B. Fuertes, Appl. Surf. Sci., 261, 574 (2012).
M. Ulfa, W. Trisunaryanti, I. I. Falah, I. Kartini and Sutarno, JAC, 7(5), 1 (2014).
J. Lee, S. Hwang, S.B. Lee and I. K. Song, Korean J. Chem. Eng., 27(6), 1755 (2010).
J. S. Jung, T. J. Kim and G. Seo, Korean J. Chem. Eng., 21(4), 777 (2004).
J.M. Ramos, J. A. Wang, L. F. Chen, U. Arellano, S. P. Ramirez, R. Sotelo and P. Schachat, Catal. Commun., 72, 57 (2015).
S. Ahmadi, Z. Yuan, S. Rohani and C. Xu, Catal. Today, 269, 182 (2016).
M.T. Le, V. H. Do, D.D. Truong, L. Bruneel, I.V. Driessche, A. Riisager, R. Fehrmann and Q.T. Tinh, Ind. Eng. Chem. Res., 55, 4846 (2016).
T. Maiyalagan, A.B. Nassr, T.O. Alaje, M. Bron and K. Scott, J. Power Sources, 211, 147 (2012).
S.T. Sie, Ind. Eng. Chem. Res., 31, 1881 (2003).
G. Chandrasekar, W. J. Son and W. S. Ahn, J. Porous Mater., 16, 545 (2009).
J. Lee, Y. Choi, J. Shin and J.K. Lee, Catal. Today (2015), http://dx.doi.org/10.1016/j.cattod.2015.09.046.
A. Ishihara, S. Tanaka, M. Aiba, T. Hashimoto and H. Nasu, J. Jpn. Petrol. Inst., 58, 2 (2015).
J. Yang, Y. Dong, J. Li, Z. Liu, F. Min and Y. Li, Korean J. Chem. Eng., 32, 2247 (2015).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pongsendana, M., Trisunaryanti, W., Artanti, F.W. et al. Hydrocracking of waste lubricant into gasoline fraction over CoMo catalyst supported on mesoporous carbon from bovine bone gelatin. Korean J. Chem. Eng. 34, 2591–2596 (2017). https://doi.org/10.1007/s11814-017-0165-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-017-0165-3