Abstract
The impact of UV aging on the characteristic properties of synthesized polyurethane (PUs) from castor oil and transesterified castor oil with palm oil based isocyanate and 1,4 butanediol was investigated at different exposure time of 0, 250, 500, 750 and 1,000 h, respectively. The aging properties of the PU films were analyzed through differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM) and Tensile tests. The PU films derived from castor oil showed noticeable changes in chemical structure after 250 h of UV exposure owing to chain scission of the urethane group. A considerable decrease in the thermal and tensile properties of the developed PU films was observed due to the plasticization phenomenon. SEM micrographs revealed morphological changes through the appearance of cracks and blisters composed of primary amines on the surface of exposed PU films. However, PUs derived from transesterified castor oil with a higher hydroxyl value exhibited improved UV resistance characteristics due to higher crosslinking and degrade only after 750 h of exposure. Thus, the synthesized green PUs based on transesterified castor oil with palm oil based isocyanate compositions can be candidate materials for developing UV resistant coating material.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
S. Bhargava, M. Kubota, R.D. Lewis, S. G. Advani, A. Prasad and J.M. Deitzel, POC, 79, 75 (2015).
P. K. Maji, P. K. Gucchait and A. K. Bhowmick, J. Mater. Sci., 21, 5861 (2009).
A. Wolska, M. Goździkiewicz and J. Ryszkowska, J. Mater. Sci., 47, 5627 (2012).
J. Zhang, W. Tu and Z. Dai, POC, 75, 579 (2012).
F. L. Floyd, Risk Management: The Real Reason for Long Product Development Time Cycles, ACS Symposium Series (1999).
J.W. Martin, Service life prediction of polymeric material: Global perspectives, Springer Science and Business Media, New York (2009).
X. F. Yang, D. E. Tallman, G.P. Bierwagen, S. G. Croll and S. Rohlik, Polym. Degrad. Stab., 77, 103 (2002).
E. C. Azevedo, E.M. Nascimento, G.O. Chierice, S. C. Neto and C. M. Lepienski, Polímeros., 23, 305 (2013).
D. Rosu, L. Rosu and C. N. Cascaval, Polym. Degrad. Stab., 94, 591 (2009).
A. Boubakri, N. Guermazi, K. Elleuch and H. F. Ayedi, Mater. Sci. Eng. A., 527, 1649 (2010).
Y. Zhang, J. Mexted, A. Barber, C. Lowe and R. Smith, Polym. Degrad. Stab., 98, 527 (2013).
V. Garcia-Pacios, V. Costa, M. Colera and J. M. Martin-Martinez, POC, 71, 136 (2011).
M. F. Valero and A. Gonzalez, J. Elastomers Plast., 44, 433 (2012).
M. Szycher, Szycher’s Handbook of Polyurethanes, 2nd Ed., CRC Press (2012).
M. Ionescu, Chemistry and Technology of Polyols for Polyurethanes, Smithers Rapra Publishing (2005).
P. S. Suchithra, V. K. Abitha, D. Patil and A.V. Rane, Mor. J. Chem., 3, 476 (2015).
S. Das, P. Pandey, S. Mohanty and S. K. Nayak, Mater. Express., 5, 377 (2015).
S. Das, P. Pandey, S. Mohanty and S.K. Nayak, POC, DOI:10.1016/j.porgcoat.2016.04.012.
H. Wang, Y. Wang, D. Liu, Z. Sun and H. Wang, J. Nanomaterials (2014), DOI:10.1155/2014/487343.
Y. S. Lai, C.W. Tsai, H.W. Yang, G. P. Wang and K. H. Wu, Mater. Chem. Phys., 117, 91 (2009).
W. Wu and G. Nancollas, Adv. Colloid Interface Sci., 79, 229 (1999).
D.K. Owens and R.C. Wendt, J. Appl. Polym. Sci., 13, 1741 (1969).
Indian Standard Specification: Methods of Sampling and Test for Resins for Paints: IS 354 (1981).
G. S. Wooster, Hamburg and F.M. Delgado, US Patent 3,639,355 (1972).
K. Somani, S. Kansara, R. Parmar and N. Patel, Int. J. Polym. Mater., 53, 282 (2004).
M. Valero, J. Pulido, A. Ramirez and Z. Zhendong, J. Am. Oil Chem. Soc., 86, 383 (2009).
A. Kaushik and P. Singh, Int. J. Polym. Anal. Charact., 10, 373 (2005).
M. F. Valero, J. E. Pulido, A. Ramirez and Z. Cheng, Qimica Nova., 31, 2076 (2008).
T. Gurunathanan, S. Mohanty and S.K. Nayak, POC, 80, 39 (2015).
M.A. de Luca, M. Martinelli, M. M. Jacobi, P. L. Becker and M. F. Ferrao, J. Am. Oil Chem. Soc., 83, 147 (2006).
M.M. Coleman, K. H. Lee, D. J. Skrovanek and P.C. Painter, Macromolecules, 19, 2149 (1986).
G. Lligadas, J. C. Ronda, M. Galia and V. Cadiz, Biomacromolecule., 8, 686 (2007).
X. F. Yang, C. Vang, D.E. Tallman, G.P. Bierwagen, S.G. Croll and S. Rohlik, Polym. Degrad. Stab., 74, 341 (2001).
R.N. Jana and H. Bhunia, High Performance Polym., 22, 3 (2010).
V. Romanova, V. Begishev, V. Karmanov A. Kondyurin and M. F. Maitz, J. Raman Spectrosc., 33, 769 (2002).
C. Willhelm and J. L. Gardette, Polym., 39, 5973 (1998).
B. Claude, L. Gonon, V. Verney and J. L. Gardette, Polym. Test., 20, 771 (2011).
L. Irusta and M. J. Fernandez-Berridi, Polym. Degrad. Stab., 63, 113 (1999).
H. Kim and M.W. Urban, Langmuir, 16, 5382 (2000).
G. Das, R.K. Trivedi and A. K. Vasishtha, JAOCS, 66, 938 (1989).
A. Zlatanic, C. Lava, W. Zhang and Z. S. Petrovic, J. Polym. Sci., Part B: Polym. Phys., 42, 809 (2004).
D. J. Harris, R. A. Assink and M. Celina, Macromolecules, 34, 6695 (2001).
C. S. Wong and K. H. Badri, Mater. Sci. Appl., 3, 78 (2012).
L. Yuhan, L. Yuxi, L. Shazou and T. Huifeng, J. Wuhan University of Technology-Mater. Sci. Ed., 29, 1270 (2014).
Z.Y. Wang, F. C. Liu, E. H. Han, K. E. Wie and L. SuZhen, Chinese Sci. Bull., 54, 3464 (2009).
Y. Deslandes, G. Pleizier and D. Alexander, Polym., 39, 2361 (1998).
J.V. Gulmine and L. Akcelrud, Eur. Polym. J., 42, 553 (2006).
C.N. Cascaval, C. Ciobanu, D. Rosu and L. Rosu, J. Appl. Polym. Sci., 83, 138 (2002).
X. F. Yang, J. Lib, S. G. Croll, D. E. Tallman and G. P. Bierwagen, Polym. Degrad. Stab., 80, 51 (2003).
J. Lemaire, R. Arnaud and J. Gardette, Pure Appl. Chem., 55, 1603 (1983).
Z.W. Wicks, F.N. Jones and S.P. Pappas, Organic coatings science and technology, 2nd Ed., Wiley New Jersey (1994).
C. Prisacariu, Polyurethane Elastomers: From Morphology to Mechanical Aspects, Springer Science & Business Media, New York (2011).
A. Tidjani, J. Appl. Polym. Sci., 64, 2497 (1997).
A. Boubakri, N. Haddar, K. Elleuch and Y. Bienvenu, Mater. Des., 31, 4194 (2010).
M. P. Foulc, A. Bergeret, L. Ferry, P. Ienny and A. Crespy, Polym. Degrad. Stab., 89, 461 (2005).
H. Ghermezcheshme, M. Mohseni and H. Yahyaei, Tribol. Int., 88, 66 (2015).
H. Yahyaei and M. Mohseni, Tribol. Int., 57, 147 (2013).
G. Wypych, Handbook of material weathering, ChemTec Publishing, Toronto (1995).
A.W. Signor, M.R. VanLandingham and J.W. Chin, Polym. Degrad. Stab., 79, 359 (2003).
A. Skaja, D. Fernando and S. Croll, JCT Res., 3, 41 (2006).
H.H. Wanga, J. Mou, Y.H. Ni, G.Q. Fei, C.L. Si and J. Zou, Express. Polym. Lett., 7, 443 (2013).
P. Kuang and K. Constant, Increased Wettability and Surface Free Energy of Polyurethane by Ultraviolet Ozone Treatment, In Tech Publishing, US (2015).
N. Nuraje, S. I. Khan, H. Misak and R. Asmatulu, ISRN Polym. Sci., 8 (2013), DOI:10.1155/2013/514617.
A. Mohammad Rabea, M. Mohseni, S.M. Mirabedini and M. Hashemi Tabatabaei, Appl. Surf. Sci., 258, 4391 (2012).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, S., Pandey, P., Mohanty, S. et al. Study of UV aging on the performance characteristics of vegetable oil and palm oil derived isocyanate based polyurethane. Korean J. Chem. Eng. 34, 523–538 (2017). https://doi.org/10.1007/s11814-016-0273-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0273-5