Abstract
A new plating bath was developed to prevent palladium plating in the pores of the porous stainless steel support when using plate-type porous substrate. The plating bath, composed of a holder, a rubber O-ring and a bottom, provides very simple assembly and is very effective in preventing palladium plating in the pores of porous stainless steel. The agitation of the plating solution increases plating rate significantly because the agitation improves the external mass transfer of Pd ion and reducing agent to the membrane surface facilitating ~99.7% plating yield of palladium ion. This new plating method carried out at a temperature range of 293 to 298 K provides a very simple and economic membrane manufacturing process. Using a newly developed plating rig, an 88.9-mm diameter membrane was fabricated, and gas permeation tests showed that the hydrogen permeation flux reached ~0.9 mol s−1 m−2 at 873 K and a pressure difference of 300 kPa and selectivity (H2/N2) was ~1,850 at 873 K with a pressure difference of 100 kPa.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M.T. Ravanchi, T. Kaghazchi and A. Kargari, Desalination, 235, 199 (2009).
A. Iulianelli and A. Basile, Catal. Sci. Technol., 1, 366 (2011).
M.V. Mundschau, X. Xie, C.R. Evenson IV and A. F. Sammells, Catal. Today, 118, 12 (2006).
S. Uemiya, Sep. Purif. Methods, 28, 51 (1999).
F. Gallucci, E. Fermandez, P. Corengia and M.V.S. Annaland, Chem. Eng. Sci., 92, 40 (2013).
S. N. Paglineri and J.D. Way, Sep. Purif. Methods, 31, 1 (2002).
S.K. Ryi, N. Xu, A. Li, C. J. Lim and J.R. Grace, Int._J. Hydrogen Energy, 35, 2328 (2010).
A. Li, W. Liang and R. Hughes, Catal. Today, 56, 45 (2000).
M. E. Ayturk and Y. H. Ma, J. Membr. Sci., 330, 233 (2009).
M. Volpe, R. Inguanta, S. Piazza and C. Sunseri, Surf. Coat. Technol., 200, 5800 (2006).
Y. Okinaka and C. Wolowodiuk, Electroless Plating of Platinum Group Metals, in: G.O. Malloy and J.B. Hajdu, Electroless Plating: Fundamentals And Application, Reprint Ed., Noyes Publications/ William Andrew Publishing, LLC, New York, 421 (1990).
K. L. Yeung, R. Aravind, J. Szegner and A. Varma, Stud. Surf. Sci. Catal., 101, 1349 (1996).
B.K.R. Nair, J. Choi and M.P. Harold, J. Membr. Sci., 288, 67 (2007).
K. L. Yeung, S.C. Christianesn and A. Varma, J. Membr. Sci., 159, 107 (1999).
J.N. Keuler, L. Lorenzen and S. Miachon, Sep. Sci. Technol., 37, 379 (2002).
S. Ilias, N.-A. Su, U. I. Udo and F. G. King, Sep. Sci. Technol., 32, 487 (1997).
R. Govind and D. Atneor, Ind. Eng. Chem. Res., 30, 591 (1991).
S.-K. Ryi, S.-W. Lee, D.-K. Oh, B.-S. Seo, J.-W. Park, J.-S. Park, D.-W. Lee and S. S. Kim, J. Membr. Sci., 467, 93 (2014).
S.-K. Ryi, J.-S. Park, K.-R. Hwang, D.-W. Kim and H.-S. An, Korean J. Chem. Eng., 29, 59 (2012).
S.-K. Ryi, C.-B. Lee, S.-W. Lee and J.-S. Park, Energy, 51, 237 (2013).
R. Capaccio, Wastewater Treatment For Electroless Plating, in: G.O. Malloy and J.B. Hajdu, Electroless Plating: Fundamentals And Application, Reprint Ed., Noyes Publications/William Andrew Publishing, LLC, New York, 519 (1990).
M. E. Ayturk and Y. H. Ma, J. Membr. Sci., 330, 233 (2009).
F. Braun, A. M. Tarditi and L. M. Cornaglia, J. Membr. Sci., 382, 252 (2011).
V.K. Bulasara, R. Uppaluri and M.K. Purkait, Mater. Manuf. Process., 27, 201 (2012).
V.K. Bulasara, R. Uppaluri and M.K. Purkait, Surf. Eng., 29, 489 (2013).
P. P. Mardilovich, Y. She and Y. H. Ma, AIChE J., 44, 310 (1998).
T. L. Ward and T. Dao, J. Membr. Sci., 153, 211 (1999).
S.-K. Ryi, J.-S. Park, S.-H. Kim, D.-W. Kim and K.-K. Cho, J. Membr. Sci., 318, 346 (2008).
Author information
Authors and Affiliations
Corresponding authors
Additional information
This article is dedicated to Prof. Sung Hyun Kim on the occasion of his retirement from Korea University.
Rights and permissions
About this article
Cite this article
Seo, BS., Han, JY., Lee, KY. et al. Electroless Pd deposition on a planar porous stainless steel substrate using newly developed plating rig and agitating water bath. Korean J. Chem. Eng. 34, 266–272 (2017). https://doi.org/10.1007/s11814-016-0256-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0256-6