Abstract
The effect of gas diffusion layer (GDL) compression on the polarization curves of a polymer electrolyte membrane fuel cell was analyzed using a polarization curve-fitting model. The polarization curves measured at four different GDL compression ratios were fitted with the model and were decomposed into an open circuit voltage and three over-voltages resulting from activation, ohmic, and mass-transport losses, respectively. The model fitting was excellent enough to use the model in the subsequent analysis of the GDL compression effect. The relationship between the over-voltages and the compression ratio was investigated by analyzing the estimated model parameters, and an optimal compression ratio was determined for the fuel cell. The proposed analysis method based on the polarization curve-fitting model can be applied to identifying quantitative differences of polarization curves under various operating conditions and designs for fuel cells.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
J. Larminie and A. Dicks, Fuel cell systems explained, 2nd Ed., Wiley, West Sussex, England (2003).
F. Barbir, PEM fuel cells: Theory and practice, 2nd Ed., Elsevier, Burlington, USA (2013).
Y. Wang, K. S. Chen, J. Mishler, S. C. Cho and X. C. Adroher, Appl. Energy, 88, 981 (2011).
I.-S. Han and H. K. Shin, Korean Chem. Eng. Res., 53, 236 (2015).
A. Mendez, T. J. Leo and M. A. Herreros, Energies, 7, 4676 (2014).
S. Park and B. N. Popov, Korean J. Chem. Eng., 31, 1384 (2014).
I.-S. Han, B.-K. Kho and S. Cho, J. Power Sources, 304, 244 (2016).
C. H. Choi, S. Yu, I.-S. Han, B.-K. Kho, D.-G. Kang, H. Y. Lee, M.-S. Seo, J.-W. Kong, G. Kim, J.-W. Ahn, S.-K. Park, D.-W. Jang, J. H. Lee and M. Kim, Int. J. Hydrogen Energy, 41, 3591 (2016).
W.-K. Lee, C.-H. Ho, J. W. Van Zee and M. Murthy, J. Power Sources, 84, 45 (1999).
J. Ge, A. Higier and H. Liu, J. Power Sources, 159, 922 (2006).
J.-H. Lin, W.-H. Chen, Y.-J. Su and T.-H. Ko, Fuel, 87, 2420 (2008).
Y. Zhou, K. Jiao, Q. Du, Y. Yin and X. Li, Int. J. Hydrogen Energy, 38, 12891 (2013).
I. Nitta, O. Himanen and M. Mikkola, Electrochem. Commun., 10, 47 (2008).
M. S. Ismail, D. B. Ingham, L. Ma and M. Pourkashanian, Renew. Energy, 52, 40 (2013).
D. Ye, E. Gauthier, J. B. Benziger and M. Pan, J. Power Sources, 256, 449 (2014).
A. Bazylak, D. Sinton, Z.-S. Liu and N. Djilali, J. Power Sources, 163, 784 (2007).
D. H. Yee, E. Gauthier, M. J. Cheah, J. Benziger and M. Pan, AIChE J., 61, 355 (2015).
X. Yuan, H. Wang, J. C. Sun and J. Zhang, Int. J. Hydrogen Energy, 32, 4365 (2007).
S. Haji, Renew. Energy, 36, 451 (2011).
M. V. Moreira and G. E. da Silva, Renew. Energy, 34, 1734 (2009).
J. Kim, S.-M. Lee, S. Srinivasan and C. E. Chamberlin, J. Electrochem. Soc., 142, 2670 (1995).
A. Saadi, M. Becherif, A. Aboubou and M. Y. Ayad, Renew. Energy, 56, 67 (2013).
F. Laurencelle, R. Chahine, J. Hamelin, K. Agbossou, M. Fournier, T. K. Bose and A. Laperriere, Fuel Cells, 1, 66 (2001).
MATLAB optimization toolbox user’s guide, http://it.mathworks.com/help/pdf_doc/optim/optim_tb. pdf.
M. Inaba, T. Kinumoto, M. Kiriake, R. Umebayashi, A. Tasaka and Z. Ogumi, Electrochim. Acta, 51, 5746 (2006).
X.-X. Yuan, S. Zhang, H. Wang, J. Wu, J. C. Sun, R. Hiesgen, K. A. Friedrich, M. Shulze and A. Huag, J. Power Sources, 195, 7594 (2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Han, IS., Park, SK. & Chung, CB. Effect of gas diffusion layer compression on the polarization curves of a polymer electrolyte membrane fuel cell: Analysis using a polarization curve-fitting model. Korean J. Chem. Eng. 33, 3121–3127 (2016). https://doi.org/10.1007/s11814-016-0157-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-016-0157-8